1. Киришүү
This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Festool OF 1400 EBQ-Plus Router. It covers its key features, including a torsion-proof design, quick cutter changes, precise depth adjustment, and effective dust extraction, ensuring optimal performance for various routing tasks.
1.1-сүрөт: Festool OF 1400 EBQ-Plus Router with included accessories and Systainer storage case.
2. Коопсуздук маалыматы
Always observe the following safety precautions when operating the Festool OF 1400 EBQ-Plus Router to prevent injury and damage to the tool.
- Колдонмону окуу: Before operation, thoroughly read and understand all instructions and safety warnings in this manual.
- Жеке коргонуу каражаттары (ЖКК): Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling cutters.
- Иш чөйрөсү: Keep the work area clean, well-lit, and free of clutter. Ensure proper ventilation, especially when routing materials that produce fine dust.
- Коопсуз жумуш бөлүгү: Ар дайым clamp or otherwise secure the workpiece firmly to prevent movement during operation.
- Proper Cutters: Use only sharp, correctly sized, and undamaged router bits suitable for the material and application.
- Электр коопсуздугу: Ensure the power supply matches the tool's specifications. Do not operate in damp or wet conditions. Inspect the power cord for damage before each use.
- Куралды тейлөө: Disconnect the power before making adjustments, changing accessories, or performing maintenance.
- Ашыкча чектен чыгуудан качыңыз: Ар дайым туура бутту жана тең салмактуулукту сактаңыз.
- Чаң чыгаруу: Connect a dust extraction system to minimize dust exposure and maintain a clear view жумуш бөлүгүнүн.
3. Пакеттин мазмуну
The Festool OF 1400 EBQ-Plus Router package includes the following items:
- Festool OF 1400 EBQ-Plus Router
- Systainer SYS3 M 337
- Collet diameter 8 mm
- Collet diameter 12 mm
- Side stop with fine adjustment
- Copy ring diameter 30 mm
- Extraction hood (top)
- Чип жыйноочу
- Open-end wrench SW 24
- Plug it mains cable (4 m)
- Cutter box (empty, for storing bits)
4. Орнотуу
4.1. Installing a Router Bit
- Ensure the router is disconnected from the power supply.
- Шпиндельди бекитүү үчүн шпиндельди бекитүү баскычын басыңыз.
- Insert the desired router bit into the appropriate collet (8mm or 12mm). Ensure the shank is inserted as far as possible without bottoming out.
- Tighten the collet nut firmly using the supplied open-end wrench (SW 24). Do not overtighten.
- Шпинделдин кулпусун бошотуңуз.
4.2. Attaching Dust Extraction
For optimal dust collection, connect a suitable dust extractor to the router's dust port.
- Attach the chip collector and top extraction hood to the router base.
- Connect the hose from your dust extractor to the dust port on the chip collector.
4.1-сүрөт: Router with dust extraction hose and clear base attached for efficient chip collection.
4.3. Attaching the Side Stop
The side stop with fine adjustment allows for precise routing parallel to an edge.
- Slide the side stop assembly onto the guide rods at the base of the router.
- Secure it in place using the locking knobs.
- Use the fine adjustment knob to set the desired distance from the edge.
5. Иштөө нускамалары
5.1. Adjusting Routing Depth
The OF 1400 EBQ-Plus features a precise 1/10 mm depth adjustment system.
- Маршрутизаторду жумушка орнотуңуз.
- Release the plunge lock.
- Маршрутизаторду бит даярдалган тетиктин бетине тийгенге чейин түшүрүңүз.
- Lock the plunge mechanism.
- Use the fine adjustment knob to set the desired routing depth. The scale provides accurate readings.
- For deeper cuts, it is recommended to make multiple passes, gradually increasing тереңдик.
5.1-сүрөт: Деталдаштырылган view of the router's controls, including the depth adjustment mechanism.
5.2. Күйгүзүү жана өчүрүү
- Connect the router to a suitable power outlet (230V).
- To turn on, press the power switch.
- To turn off, release the power switch. The quick brake system will rapidly stop the bit rotation.
5.3. Ылдамдыкты көзөмөлдөө
The router features variable speed control (10,000 - 22,500 min⁻¹) via the MMC electronic system. Adjust the speed according to the router bit diameter and the material being routed. Lower speeds are generally used for larger bits and harder materials.
5.4. General Routing Techniques
- Маршрутизаторду ар дайым биттин айлануу багытына каршы жылдырыңыз (колдо кармалуучу роутерлер үчүн өйдө карай кесүү сунушталбайт).
- Maintain a steady, consistent feed rate. Avoid forcing the tool.
- Даярдоочу бөлүктүн бекем clampред.
- For edge routing, use the side stop or a guide rail for straight cuts.
5.2-сүрөт: A user demonstrating proper handling of the router during operation.
5.3-сүрөт: Router being used with a guide rail system for accurate and straight routing.
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө сиздин Festool OF 1400 EBQ-Plus роутериңиздин узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: After each use, disconnect the power and clean the router, especially the collet area and plunge mechanism, from dust and debris using a brush or compressed air.
- Коллетти текшерүү: Цепка менен гайканын эскиргендигин же бузулгандыгын үзгүлтүксүз текшерип туруңуз. Буттун туура кармалышын камсыз кылуу үчүн зарыл болсо, алмаштырыңыз.
- Көмүртек щеткалары: The motor uses carbon brushes. Refer to the service manual or contact Festool service for brush inspection and replacement if the tool shows signs of reduced power or sparking.
- Электр кабели: Inspect the power cord for cuts, abrasions, or other damage. Replace damaged cords immediately.
- Сактагыч: Store the router and its accessories in the Systainer in a dry, secure location, away from direct sunlight and extreme temperatures.
7. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Маршрутизатор башталбайт. | Электр энергиясы жок; бузулган жип; туура эмес өчүргүч. | Check power connection. Inspect cord for damage. Contact service if switch is faulty. |
| Excessive vibration or poor cut quality. | Dull or damaged router bit; loose collet; incorrect speed setting. | Replace or sharpen bit. Ensure collet is tightened. Adjust speed for material. |
| Мотор ысып кетет. | Overloading the tool; insufficient ventilation; dull bit. | Reduce feed rate or depth of cut. Ensure vents are clear. Use sharp bits. |
| Чаңды сордуруу натыйжасыз. | Dust port clogged; dust extractor not connected or insufficient power. | Clear dust port. Ensure dust extractor is properly connected and operating. |
For issues not listed here, please contact Festool customer support or an authorized service center.
8. Техникалык шарттар
| Модел | OF 1400 EBQ-Plus |
| Бөлүмдүн номери | 576540 |
| Энергияны керектөө | 1400 Вт |
| Тtage | 230 вольт |
| Бош ылдамдык | 10,000 - 22,500 мин⁻¹ |
| Коллет диаметри | 6.00 - 12.70 mm (includes 8 mm and 12 mm) |
| Фрезерлөө соккусу | 70.00 мм |
| Фрезерлөө тереңдигин так жөндөө | 8.00 мм |
| Table Opening | 63.00 мм |
| Чаң соргуч туташуусу | Ø 27/36 мм |
| Кабелдин узундугу | 4.00 м |
| Продукт Салмагы | 4.70 кг (10.34 фунт) |
| Өлчөмдөрү (L x W x Y) | 0.39 x 0.39 x 0.39 inches (Note: These dimensions likely refer to packaging, not the tool itself) |
Эскертүү: Техникалык мүнөздөмөлөр эскертүүсүз өзгөртүлүшү мүмкүн.
9. Кепилдик жана колдоо
Festool provides a comprehensive warranty for its products. Please refer to the official Festool website or your purchase documentation for detailed warranty terms and conditions specific to your region.
For technical support, service, or spare parts, please contact your authorized Festool dealer or visit the official Festool webсайт:
