Schiit Mani 2 Phono Preamp User Manual

1. Киришүү

The Schiit Mani 2 is a high-performance phono preamplifier designed to connect a turntable to an audio system. It provides the necessary amplification and RIAA equalization for both Moving Magnet (MM), Moving Coil (MC), and Moving Iron (MI) cartridges, ensuring accurate playback of vinyl records. This manual provides instructions for setup, operation, and maintenance of your Mani 2.

2. Өзгөчөлүктөрү

• Жогорку аткаруу: Designed for low noise and high RIAA accuracy, utilizing TI OPA1612 operational amplifiers and precision components.
• Cartridge Flexibility: Compatible with a wide range of MM, MC, and MI cartridges.
• Adjustable Gain: Selectable gain settings of 35dB, 45dB, 50dB, or 60dB to match various cartridge outputs.
• Adjustable Loading: Input loading options include 47KΩ, 200Ω, 47Ω, or 38Ω, and capacitance options of 47pF, 100pF, 150pF, or 200pF.
• Төмөн жыштык чыпкасы: Switchable 6dB/octave or 12dB/octave passive low-frequency filter at 15 Hz to address warped records or subsonic issues.
• DC Coupled Design: Features a DC-coupled topology with an advanced dual-filtered power supply for enhanced transparency.
• Электр камсыздоо: Utilizes a +/-16V rail power supply for optimal performance.
• Курулуш: Designed and built in the USA.

3. Пакеттин мазмуну

Сураныч, төмөнкү нерселер үчүн кутучаны белгилеңиз:

• Schiit Mani 2 Phono Preampкөтөргүч бирдиги
• Power Adapter (115VAC, USA Plug)
• Колдонуучунун Колдонмосу (бул документ)

If any items are missing or damaged, please contact your retailer or Schiit Audio support.

4. Коопсуздук маалыматы

• Электр камсыздоо: Use only the provided power adapter. This unit is designed for 115VAC operation with a USA plug and is suitable for use in the United States, Canada, and Mexico. It is not compatible with 220-240V electrical systems.
• Вентиляция: Агрегаттын айланасында жетиштүү желдетүүнү камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
• Нымдуулук: Агрегатты сууга же ашыкча нымдуулукка дуушар кылбаңыз.
• Тейлөө: There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Opening the unit voids the warranty.
• Жайгашкан жери: Place the unit on a stable, level surface away from heat sources, direct sunlight, and strong electromagnetic fields.

5. Орнотуу

Follow these steps to set up your Schiit Mani 2 Phono Preampөмүр берүүчү:

1. Таңылганын ачуу: Carefully remove the Mani 2 and its power adapter from the packaging.
2. Жайгашкан жери: Position the Mani 2 near your turntable and audio receiver/amplifier. Ensure there is enough space for cable connections and ventilation.
3. Adjust Dip Switches (Bottom Panel): Before connecting, configure the gain, loading, and low-frequency filter settings using the dip switches located on the bottom of the unit. Refer to Section 6.1 for detailed instructions on these adjustments.
4. Connect Turntable: Connect the RCA output cables from your turntable to the "IN" RCA jacks on the rear panel of the Mani 2. Ensure left (L) and right (R) channels are correctly matched.
5. Жер зымдарын туташтыруу: Connect the ground wire from your turntable to the ground terminal on the rear panel of the Mani 2. This helps reduce hum and noise.
6. туташуу Ampөмүр берүүчү: Connect the "OUT" RCA jacks on the rear panel of the Mani 2 to a line-level input (e.g., "AUX", "CD", "Tuner") on your audio receiver or ampөмүрлүү. Do not connect to your amplifier's "PHONO" input, as this would result in double pre-ampжашоо.
7. Туташуу кубаты: Connect the provided power adapter to the "AC IN" jack on the rear panel of the Mani 2, then plug the adapter into a suitable 115VAC wall outlet.
8. Күйгүзүү: Flip the power switch on the rear panel to the "ON" position. The front panel LED will illuminate.

Figure 1: Rear panel connections of the Schiit Mani 2. Shows RCA input and output, ground terminal, and AC power input.

Figure 2: Bottom panel of the Schiit Mani 2, illustrating the dip switches for configuring gain, loading, and low-frequency filter settings.

6. Иштөө нускамалары

Once the Mani 2 is set up and connected, operating it is straightforward. The primary adjustments are made via the dip switches on the bottom panel.

6.1. Adjusting Gain, Loading, and LF Filter

The Mani 2 offers significant flexibility to match various cartridges. These settings are configured using dip switches on the bottom of the unit. Always power off the Mani 2 and disconnect the power adapter before making any adjustments to the dip switches.

Жөндөөлөрдү алуу

Gain adjusts the amplification level to match your cartridge's output. Refer to your cartridge's specifications for recommended gain. The Mani 2 offers four gain settings:

• 35дБ: Suitable for high-output MM/MI cartridges.
• 45дБ: Common for standard MM/MI cartridges.
• 50дБ: For lower-output MM/MI or higher-output MC cartridges.
• 60дБ: Ideal for low-output MC cartridges.

Consult Figure 2 for the location of the gain dip switches and their corresponding positions for each setting.

Loading Settings (Resistance and Capacitance)

Loading refers to the electrical impedance presented to the cartridge. Correct loading optimizes frequency response and transient behavior. The Mani 2 provides options for both resistive and capacitive loading.

• Resistive Loading: Choose from 47KΩ (standard for MM/MI), 200Ω, 47Ω, or 38Ω (for MC cartridges).
• Capacitive Loading: Choose from 47pF, 100pF, 150pF, or 200pF.

The default setting for MM/MI cartridges is typically 47KΩ and 47pF. For MC cartridges, consult the cartridge manufacturer's recommendations. Consult Figure 2 for the location of the loading dip switches and their corresponding positions for each setting.

Low-Frequency (LF) Filter

The LF filter helps mitigate issues caused by warped records or turntable rumble, which can cause excessive woofer excursion. The Mani 2 offers two passive filter options at 15 Hz:

• 6dB/octave: A gentler filter.
• 12dB/octave: A steeper filter for more pronounced issues.

If you experience excessive woofer movement or low-frequency distortion, engaging the LF filter may be beneficial. Consult Figure 2 for the location of the filter dip switches.

6.2. Нормалдуу иштөө

Once all connections and dip switch settings are confirmed:

1. Сиздин камсыз кылуу amplifier/receiver is turned off or its volume is set to minimum.
2. Turn on the Mani 2 using the rear power switch. The front LED will light up.
3. Өзүңүздү күйгүзүңүз amplifier/receiver and select the input connected to the Mani 2.
4. Start playing a record on your turntable.
5. Үнүңүздү акырындык менен жогорулатыңыз amplifier/receiver to your desired listening level.

Сүрөт 3: Алдыңкы view of the Schiit Mani 2, highlighting its compact design and power indicator LED.

7. Техникалык тейлөө

• Тазалоо: Агрегаттын сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалагычтарды же эриткичтерди колдонбоңуз.
• Чаң: Keep the unit free from dust. Use compressed air to gently clear any dust from ventilation openings.
• Сактагыч: Эгерде түзмөктү узак убакытка сактап койсоңуз, аны электр тармагынан сууруп, салкын, кургак жерде сактаңыз.

8. Кыйынчылыктарды

If you continue to experience issues, please contact Schiit Audio support for further assistance.

9. Техникалык шарттар

10. Кепилдик жана колдоо

Schiit Audio products are typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Schiit Audio webсайт. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.

For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact Schiit Audio directly through their official webсайтты же продуктуңуз менен берилген байланыш маалыматын.

Webсайт: www.schiit.com