Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of the HYPERLITE Microwave Motion Sensor, specifically designed for use with HYPERLITE Radar Series LED High Bay Lights. This sensor enhances energy efficiency by automatically controlling lighting based on detected motion.
Коопсуздук маалыматы
- Орнотуудан жана колдонуудан мурун бардык нускамаларды кылдат окуп чыгыңыз.
- Ensure power is disconnected before any installation or maintenance.
- This device is designed for indoor use with compatible HYPERLITE Radar Series LED High Bay Lights only.
- Do not attempt to modify or repair the sensor. Contact qualified personnel for assistance.
- Балдар жетпеген жерде сактаңыз.
Продукт бүттүview
The HYPERLITE Microwave Motion Sensor (Model HU-XI-201) is a compact, detachable unit that integrates seamlessly with HYPERLITE Radar Series LED High Bay Lights. It utilizes microwave technology to detect motion, providing automatic light control.
Компоненттер
- Microwave Motion Sensor Unit
- Алыстан башкаруу (кошулган)
Өзгөчөлүктөрү
- Шайкештик: Exclusively for HYPERLITE Radar Series LED High Bay Lights.
- Автоматтык күйгүзүү/өчүрүү: Lights turn on when motion is detected and off after 30 seconds of no movement (factory setting).
- Оңой орнотуу: Detachable design for quick and convenient setup.
- Кеңири иштөө температурасы: -40°Cден +70°Cге чейин.
- Operating Voltage: 10.5-15 В DC.
- Макс. Монтаждын бийиктиги: 15m (ceiling mounted).
Орнотуу жана орнотуу
The motion sensor is designed for quick and easy installation. Follow these steps to attach it to your HYPERLITE Radar Series LED High Bay Light.
Орнотуу кадамдары
- Жарык шамын даярдаңыз: Ensure the HYPERLITE Radar Series LED High Bay Light is powered off and safely positioned for installation.
- Unscrew the Base Cover: Locate the central cover on the base of the high bay light. Unscrew this cover to reveal the sensor port.
Figure 1: Unscrewing the cover from the base of the high bay light.
- Insert the Motion Sensor: Carefully align the HYPERLITE Microwave Motion Sensor with the exposed port.
Figure 2: The HYPERLITE Microwave Motion Sensor unit.
- Screw on the Motion Sensor: Gently screw the motion sensor into the port until it is securely fastened.
Figure 3: Screwing the motion sensor onto the high bay light.
- Шайкештикти текшерүү: Ensure your light is a Radar Series model. The sensor is not compatible with other series.
Figure 4: Compatibility check for Radar Series lights.
Video Guide
For a visual guide on installing the motion sensor, please watch the video below:
Video: Demonstrates the simple installation process of the HYPERLITE motion sensor onto a high bay light. It shows unscrewing the base cover, inserting the sensor, and screwing it in place.
Иштөө нускамалары
Once installed, the HYPERLITE Microwave Motion Sensor operates automatically.
Motion Detection
- The sensor detects movement of people, cars, or other objects within its detection range.
- Upon detection, the connected HYPERLITE Radar Series LED High Bay Light will automatically turn on.
Figure 5: Automatic light activation upon motion detection.
Автоматтык өчүрүү
- If no movement is detected for a period of approximately 30 seconds (factory default setting), the light will automatically turn off. This feature helps conserve energy.
Figure 6: Automatic light deactivation after a period of no motion.
Detection Range and Mounting Height
The sensor can be mounted up to a maximum height of 15 meters (ceiling mounted). The detection range is influenced by mounting height and surrounding environment.
Figure 7: Sensor detection area based on mounting height.
Note: The motion sensing function can be affected by the surrounding environment. It is not recommended for outdoor use as a street light.
Техникалык тейлөө
The HYPERLITE Microwave Motion Sensor requires minimal maintenance.
- Тазалоо: Periodically wipe the sensor's surface with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners or solvents.
- Текшерүү: Regularly check for any visible damage to the sensor or its connection to the light fixture.
- Экологиялык эске алуулар: Ensure the sensor is not obstructed by objects that could block its detection field.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кыймыл менен жарык жанбайт. |
|
|
| Жарык тынымсыз күйүп турат. |
|
|
| Жарык өтө тез/жай өчүп жатат. |
|
|
Техникалык шарттар
| Атрибут | Деталь |
|---|---|
| Бренд | ГИПЕРЛИТ |
| Модель номери | HU-XI-201 |
| Түс | Кара |
| Материал | Пластик |
| Стиль | Заманбап |
| Жарык берүүчү форма | Шыбы |
| Бөлмө түрү | Гараж |
| Продукт үчүн атайын колдонуу | Гараж |
| Ички/тышкы колдонуу | Indoor |
| Power Source | Электр зымдары |
| Орнотуу түрү | Шыпка орнотуу |
| Өзгөчө өзгөчөлүк | Motion Sensor |
| Башкаруу ыкмасы | Алыстан |
| Жарык булагы түрү | LED |
| Жарык булактарынын саны | 1 |
| Тtage | 110 вольт |
| Камтылган компоненттер | Алыстан башкаруу |
| Кепилдик түрү | Чектелген |
| Жарыктандыруу ыкмасы | LED |
| Ватtage (for compatible light) | 110 ватт |
| Bulb Base (for compatible light) | GX53 |
| Controller Type | Алыстан башкаруу |
| Которуу түрү | Motion Sensor |
| Бирдик саны | 1.0 Сан |
| Натыйжалуулук | Энергияны үнөмдүү |
| Монтаж түрү | Шыпка орнотуу |
| Арматура түрү | Non Removable |
| Ассамблея талап кылынат | Жок |
| Элемент Салмагы | 1.13 унция |
| Пакеттин өлчөмдөрү | 2.28 x 2.28 x 1.85 дюйм |
| Иштөө температурасы | -40°Cден +70°Cге чейин |
| Operating Voltage | 10.5-15В DC |
| Макс. Монтаждын бийиктиги | 15m (ceiling mounted) |
| Factory Setting Timing | 30 секунд |
Кепилдик жана колдоо
The HYPERLITE Microwave Motion Sensor comes with a Чектелген Кепилдик. For detailed warranty information, technical support, or any inquiries, please visit the official HYPERLITE webсайтка же кардарларды тейлөөгө кайрылыңыз.
Visit the HYPERLITE Store on Amazon
Manufacturer: HYPERLITE
Модель: HU-XI-201
Алгачкы жеткиликтүү болгон күнү: 2022-жылдын 14-февралы
