LUTEC 3200LM Dual-Head Motion Activated Flood Light

LUTEC 3200LM кош баштуу кыймылдуу активдештирилген прожектор колдонуучусунун колдонмосу

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your LUTEC 3200LM Dual-Head Motion Activated Flood Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. This flood light is designed for outdoor use, offering motion-activated security lighting with adjustable heads and various operational modes.

2. Коопсуздук маалыматы

  • Электр коопсуздугу: Installation must be performed by a qualified electrician or in accordance with local electrical codes. Ensure power is turned off at the circuit breaker before installation, maintenance, or bulb replacement.
  • Негиздөө: Бул арматура туура жерге туташтырылышы керек.
  • Лампочканын түрү: For models requiring separate bulbs, use only PAR38 LED, PAR38 incandescent, PAR38 halogen, or PAR38 dimmable CFL bulbs as specified. Do not exceed the maximum wattage рейтинг.
  • Жылуулук: Halogen bulbs generate significant heat. Allow the fixture to cool before handling or replacing bulbs. Keep flammable materials away from the light heads.
  • Суу өткөрбөйт рейтинги: The fixture is waterproof for outdoor use. Ensure all connections are sealed properly during installation to maintain this rating.
  • Монтаждоо: Mount the fixture securely to a stable surface according to the installation instructions.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

  • LUTEC Dual-Head Motion Activated Flood Light Fixture
  • Орнотуу жабдуулары (бурамалар, зым гайкалар, прокладка)
  • Instruction Manual

Note: For models requiring separate bulbs, PAR38 bulbs are NOT included and must be purchased separately.

4. Орнотуу жана орнотуу

Follow these steps for safe and proper installation of your flood light.

4.1 Даярдоо

  1. Кубатты өчүрүү: Locate the circuit breaker controlling the outdoor lighting circuit and turn off the power.
  2. Монтаждоо ордун тандоо: Choose a suitable wall or eave location that provides the desired coverage area and is within reach of existing wiring. The recommended mounting height is 6-10 feet (1.8-3 meters) above the ground.

4.2 Арматураны орнотуу

The flood light is designed for surface-mounted installation.

  1. Берилген бурамалар аркылуу монтаждык кронштейнди бириктирүүчү кутуга бекитиңиз.
  2. Feed the electrical wires from the junction box through the center hole of the mounting bracket.
  3. Connect the wires: Connect the black fixture wire to the black supply wire, the white fixture wire to the white supply wire, and the green/bare copper fixture wire to the ground wire using wire nuts. Ensure connections are secure.
  4. Зымдарды бириктирүүчү кутуга кылдаттык менен салыңыз.
  5. Align the fixture with the mounting bracket and secure it with the provided screws, ensuring the gasket creates a watertight seal against the mounting surface.
LUTEC Dual-Head Motion Activated Flood Light

Сүрөт 1: Бүттүview of the LUTEC Dual-Head Motion Activated Flood Light. This image displays the two adjustable light heads and the integrated motion sensor, ready for wall mounting.

4.3 Bulb Installation (for Halogen/Incandescent Models)

If your model requires separate bulbs:

  1. Carefully screw the PAR38 bulbs (up to 150W each, not included) into the sockets of the light heads. Do not overtighten.
  2. Ensure the bulbs are fully seated.
LUTEC Security Light in Bronze, Bulbs Not Included

Сүрөт 2: A bronze-colored LUTEC security light mounted on a wall, illustrating the appearance without bulbs installed. This highlights that bulbs are a separate purchase for certain models.

4.4 Кубат күйгүзүлдү

Орнотуу аяктагандан кийин автоматтык өчүргүчтөгү кубатту калыбына келтириңиз.

5. Иштөө нускамалары

Your LUTEC flood light features adjustable light heads and a motion sensor with customizable settings.

5.1 Жарык баштарын жөндөө

The two light heads can be rotated 360 degrees horizontally and vertically to direct illumination precisely where needed. Loosen the adjustment screws slightly, position the heads, and then tighten the screws to secure them.

Adjustable Design of LUTEC Flood Light

Сүрөт 3: This image demonstrates the adjustable design of the flood light heads, showing arrows indicating the range of motion for directing light. This feature allows users to customize the illuminated area.

Adjustable Design of LUTEC Flood Light (Bronze)

Сүрөт 4: Башка view of the adjustable design, featuring a bronze-colored fixture. The arrows highlight the flexibility in positioning the light heads and the motion sensor.

5.2 Кыймыл сенсорунун иштеши

The integrated motion sensor detects movement within its sensing range and activates the light. The sensor has a 180-degree sensing angle.

Motion Sensor Range Diagram (Halogen/LED)

Сүрөт 5: Diagram illustrating the motion sensor's 180-degree sensing angle and a maximum range of 20-70 feet. A silhouette of a person walking is shown to demonstrate detection.

Motion Sensor Range Diagram (LED)

Сүрөт 6: A similar diagram showing the motion sensor's 180-degree sensing angle and a maximum range of 0-59 feet for the LED version. This visual aids in understanding the sensor's coverage.

6. Кыймыл сенсорунун жөндөөлөрү

The motion sensor features adjustable controls for sensitivity (distance) and illumination duration (time). These controls are typically located on the underside of the sensor unit.

Motion Sensor Settings (Halogen/LED)

Сүрөт 7: Close-up of the motion sensor controls, showing dials for 'Sensitivity' (L, M, H) and 'Time' (1 MIN, 3 MIN, 10 MIN, TEST). This image helps users identify and adjust the settings.

Motion Sensor Settings (LED)

Сүрөт 8: Another close-up of the motion sensor controls, specifically for the LED version, showing 'Distance' (L, M, H, Dusk to Dawn) and 'Time' (1 MIN, 3 MIN, 10 MIN, TEST). This provides specific settings for LED models.

6.1 Sensitivity (Distance) Settings

This dial controls how far the sensor detects motion.

  • L (төмөн): Up to 0-20 ft. (LED) / Up to 20-30 ft. (Halogen)
  • M (Орто): Up to 20-39 ft. (LED) / Up to 40-50 ft. (Halogen)
  • H (Жогорку): Up to 39-59 ft. (LED) / Up to 60-70 ft. (Halogen)
  • Dusk to Dawn (LED only): The light will turn on automatically at dusk and turn off at dawn, regardless of motion.

6.2 Убакыт орнотуулары

This dial determines how long the light remains on after motion is detected and stops.

  • СЫНОО: For initial setup and aiming the sensor. The light will stay on for a few seconds after detection, regardless of ambient light.
  • 1 MIN: Light stays on for approximately 1 minute.
  • 3 MIN: Light stays on for approximately 3 minutes.
  • 10 MIN: Light stays on for approximately 10 minutes.

6.3 Operating Modes Overview

The combination of settings allows for different operational behaviors:

Иштөө режимдеринин диаграммасы

Сүрөт 9: A visual guide to the three main operating modes: Test Mode, Security Mode, and Dusk to Dawn. It shows how the light behaves (OFF, LOW, HIGH) under different ambient light conditions (sun for day, moon for night) and with motion detection.

  • Сыноо режими: Used during installation to verify sensor function and coverage. Light activates for a short duration upon motion, regardless of ambient light.
  • Коопсуздук режими: Light activates only when motion is detected in low light conditions, staying on for the set time.
  • Таң батканга чейин режими: Light turns on at dusk and off at dawn. For LED models, this can be selected via the distance dial. For Halogen models, this functionality might be integrated with the sensor's light level detection.

7. Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө сиздин прожекторуңуздун оптималдуу иштешин жана узак мөөнөттүү иштешин камсыз кылат.

  • Тазалоо: Жарык баштарын жана кыймыл сенсорунун линзасын мезгил-мезгили менен жумшак, d менен тазалап туруңуз.amp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз. Тазалоодон мурун электр кубаты өчүрүлгөнүн текшериңиз.
  • Bulb Replacement (for Halogen/Incandescent Models): If a bulb burns out, turn off power at the circuit breaker. Allow the fixture to cool completely. Unscrew the old bulb and replace it with a new PAR38 bulb of the correct wattage (150 Вт чейин).
  • Текшерүү: Жыл сайын зымдарды жана бекиткичтерди эскирүүнүн, бузулуунун же бош туташуулардын белгилерин текшерип туруңуз.

8. Кыйынчылыктарды

If your flood light is not functioning correctly, refer to the following common issues and solutions:

КөйгөйМүмкүн себепЧечим
Жарык күйбөйт.Шайманга күч жок.
Bulb(s) faulty or loose (Halogen/Incandescent).
Sensor in 'TEST' mode or incorrect 'Dusk to Dawn' setting.
Ambient light too high.
Электр өчүргүчтү текшерүү.
Replace or tighten bulb(s).
Adjust sensor settings. Ensure 'Dusk to Dawn' is not selected if motion activation is desired.
Wait for darker conditions or adjust sensor sensitivity.
Жарык тынымсыз күйүп турат.Sensor detecting constant motion.
Sensor set to 'Dusk to Dawn' mode.
Зымдарда ката.
Adjust sensor angle or sensitivity to avoid unwanted detection.
Change sensor setting from 'Dusk to Dawn' if motion activation is desired.
Зымдарды байланыштарды текшериңиз.
Жарык күндүз күйөт.Sensor in 'TEST' mode.
Sensor's photocell is obstructed or faulty.
Switch sensor out of 'TEST' mode.
Clear any obstructions from the sensor lens. If problem persists, contact support.
Motion sensor range is too short/long.Sensitivity setting incorrect.
Obstructions in sensing area.
Adjust the 'Sensitivity' or 'Distance' dial (L, M, H).
Remove any objects blocking the sensor's view.

9. Техникалык шарттар

ӨзгөчөлүкСпецификация
БрендLUTEC
Модель номери0fde3b7f-0904-4a5b-9c4b-42a7a822a0f7
Жарык булагы түрүHalogen, LED (compatible with PAR38 bulbs)
Жарыктык3200 Lumen (LED), up to 300 Watt (Halogen/Incandescent)
Түс температурасы4000K (LED)
Motion Sensor Angle180 градус
Кыймыл сенсорунун диапазонуUp to 59-70 feet (depending on model/setting)
Жөнгө салынуучу таймер1, 3, 10 minutes, Test mode
Power SourceЭлектр зымдары
Тtage120 вольт (AC)
Ички/тышкы колдонууСыртта
Сууга туруктуулук деңгээлиСуу өткөрбөйт
Монтаж түрүДубалга орнотуу
ӨзгөчөлүктөрDawn-To-Dusk, Dimmable, Motion Sensor, Waterproof

10. Кепилдик жана колдоо

Your LUTEC Dual-Head Motion Activated Flood Light is covered by a 3 жылдык Чектелген Кепилдик. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

If you encounter any issues or have questions regarding your product, please contact LUTEC customer support. Refer to the product packaging or the official LUTEC webакыркы байланыш маалыматы үчүн сайт.

Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.

Тектеш документтер - 3200LM Dual-Head Motion Activated Flood Light

Preview LUTEC 7621101053 Wet Location Flood Light Installation and Operation Manual
This manual provides instructions for the installation, operation, and maintenance of the LUTEC 7621101053 Wet Location Flood Light. It covers safety precautions, mode settings, and troubleshooting.
Preview LUTEC 7632802053/7632802012 Нымдуу жерди орнотуу боюнча колдонмо
Бул документ LUTEC 7632802053/7632802012 нымдуу жайгашкан жарык берүүчү приборлорду орнотуу боюнча көрсөтмөлөрдү берет. Ал коопсуздук эскертүүлөрүн жана этап-этабы менен чогултуу боюнча көрсөтмөлөрдү камтыйт.
Preview LUTEC кыймыл менен иштетилүүчү прожектордун колдонуучусунун колдонмосу жана орнотуу боюнча колдонмо
This document provides comprehensive instructions for the LUTEC Motion-Activated Floodlight, including safety warnings, installation procedures, operating modes, maintenance tips, troubleshooting, and a 3-year limited warranty. Covers models 7632812012, 7632812053, and 7632812412.
Preview LUTEC Motion-Activated Floodlight Owners Manual - Model #7622224012/7622224053
Owners manual for the LUTEC Motion-Activated Floodlight, model #7622224012/7622224053. Includes package contents, safety information, installation instructions, operating instructions, troubleshooting, and warranty details.
Preview LUTEC P6221B/P6221W LED прожектордун ээлери үчүн колдонмо жана орнотуу боюнча колдонмо
LUTEC P6221B жана P6221W LED прожекторлору үчүн комплекстүү ээлеринин колдонмосу. Коопсуздук эскертүүлөрүн, орнотуу кадамдарын, бузулууларды аныктоону жана 3 жылдык чектелген кепилдик маалыматын камтыйт.
Preview LUTEC #7632801053/7632801012 Нымдуу жерде кыймыл сенсору бар жарыкты орнотуу жана пайдалануу боюнча колдонмо
Бул колдонмодо LUTEC #7632801053/7632801012 сырткы нымдуу жердеги кыймыл сенсорунун жарыгы үчүн орнотуу, иштөө режимдери, коопсуздук эскертүүлөрү жана тейлөө маалыматы боюнча кеңири көрсөтмөлөр берилген.