Спектр проекциялык ванtage UST Projector Screen 110-inch Diagonal User Manual

1. Киришүү

This manual provides comprehensive instructions for the assembly, installation, operation, and maintenance of your Spectra Projection Vantage UST Projector Screen. This screen is specifically designed for Ultra Short Throw (UST) projectors, featuring an Ambient Light Rejecting (ALR) surface to enhance image quality in various lighting conditions. Please read this manual thoroughly before proceeding with assembly and installation to ensure proper setup and optimal performance.

Image 1.1: The Spectra Projection Vantage UST Projector Screen in a typical home theater setup.

2. Коопсуздук маалыматы

• Always handle the screen material with clean hands to avoid smudges or damage.
• Ensure the installation surface is structurally sound and capable of supporting the screen's weight.
• Тумчугуп калуу коркунучун болтурбоо үчүн кичинекей бөлүктөрүн балдар жетпеген жерде сактаңыз.
• Do not attempt to modify the screen or its components. Unauthorized modifications may void the warranty and pose safety risks.
• During assembly, follow all steps carefully to prevent injury or damage to the product.

3. Пакеттин мазмуну

Чогултууну баштоодон мурун, төмөндө көрсөтүлгөн бардык компоненттер таңгагыңызда бар экенин текшериңиз. Эгерде кандайдыр бир тетиктер жок болсо же бузулган болсо, кардарларды колдоо кызматына кайрылыңыз.

Image 3.1: The Spectra Projection Vantage UST Screen is shipped unassembled in a protective box.

• Screen Material (1)
• Frame Sections (4)
• Corner Connectors (4)
• Tension Rods (Quantity varies by size)
• Дубалга орнотуу кронштейндери (2)
• Hardware Kit (Screws, anchors, etc.)
• Көрсөтмө (бул документ)

4. Орнотуу жана орнотуу

The Spectra Projection Vantage UST Screen requires assembly prior to use. It is recommended to have two people for assembly and installation. Refer to the detailed step-by-step guide included in the package or online videos for visual assistance.

4.1 Рамка монтажы

1. Unpack all components carefully on a clean, flat surface.
2. Connect the four frame sections using the corner connectors. Ensure they are securely fastened.
3. Lay the screen material face down onto the assembled frame.
4. Carefully insert the tension rods into the designated channels around the perimeter of the screen material. These rods will then attach to the frame to keep the screen taut.

Маанилүү: Ensure the tension rods are correctly inserted and the screen material is evenly stretched to prevent wrinkles or tearing. Refer to the specific instructions for rod insertion to avoid issues such as those reported where rods did not fit correctly or caused tearing.

Image 4.1: The luxurious black velvet frame helps absorb overflow light and aids in alignment.

4.2 Дубалга орнотуу

The screen is designed for wall mounting. Use the provided wall mount brackets and hardware.

• Determine the desired height and center position for your screen.
• Mark the drilling locations for the wall mount brackets. Ensure the marks are level and spaced correctly according to the screen's dimensions.
• Drill pilot holes and install the wall anchors (if necessary) before securing the brackets to the wall.
• Carefully lift the assembled screen and hook it onto the installed wall mount brackets.

Сүрөт 4.2: Мисample of a wall mount bracket used for installation.

Image 4.3: Frame depth and length measurements for installation planning.

5. Иштөө нускамалары

The Spectra Projection Vantage UST Screen is designed to optimize the performance of Ultra Short Throw projectors. Its Ambient Light Rejecting (ALR) surface is engineered to absorb ambient light from above and the sides, while reflecting light from the UST projector below, directly back to the viewэ.

5.1 Проекторду жайгаштыруу

Position your Ultra Short Throw projector directly below the screen, ensuring the projection angle aligns with the screen's ALR properties. The screen's design prevents hot-spots and maintains deep black levels, even in rooms with ambient light.

Image 5.1: Proper placement of an Ultra Short Throw projector relative to the screen.

5.2 Ambient Light Rejection

The specialized optical structure of the ALR surface selectively reflects light from the projector while absorbing light from other angles. This results in improved contrast, color saturation, and overall image clarity, even in well-lit environments.

Image 5.2: Diagram explaining the principle of Ambient Light Rejection.

Image 5.3: Visual comparison of Vantage UST 0.5 screen performance versus a standard matte white screen.

6. Техникалык тейлөө

To maintain the optimal performance and appearance of your Spectra Projection Vantage UST Screen, follow these guidelines:

• Экрандын бетин тазалоо: Gently wipe the screen surface with a soft, lint-free microfiber cloth. For stubborn marks, lightly dampen the cloth with distilled water. Do not use harsh chemicals, abrasive cleaners, or excessive pressure, as this can damage the ALR coating.
• Рамканы тазалоо: The black velvet frame can be gently dusted with a soft brush or a vacuum cleaner with a brush attachment.
• Сактагыч: If the screen needs to be disassembled and stored, ensure it is kept in a clean, dry environment, protected from direct sunlight and extreme temperatures.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your projector screen.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or to inquire about replacement parts, please contact Spectra Projection customer service. Refer to the product packaging or the official Spectra Projection webакыркы байланыш маалыматы үчүн сайт.

Online resources, including detailed setup videos, may be available to assist with assembly and troubleshooting.