Stelpro ASHC2002W

Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) Instruction Manual

Model: ASHC2002W

1. Introduction and Overview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W, in white, viewбурчтан.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. Коопсуздук маалыматы

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

  • Бул жылыткычты орнотуудан же колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
  • Орнотуудан же техникалык тейлөөдөн мурун, негизги автоматтык өчүргүчтөн электр менен камсыздоонун өчүрүлгөнүн текшериңиз.
  • Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
  • Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
  • Бул жылыткыч имараттын ичинде гана колдонуу үчүн иштелип чыккан.
  • Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. Пакеттин мазмуну

Пакетти ачканда бардык компоненттер бар экенин жана бузулбаганын текшериңиз:

  • Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
  • Concealed Mounting Bracket
  • Back Entry Plate with Cable Clamps
  • Орнотуу жабдуулары (буроолор, анкерлер)
  • Instruction Manual

4. Техникалык шарттар

ӨзгөчөлүкДеталь
БрендStelpro
Модель номериASHC2002W
Power Output2000 Вт (240 В чыңалууда) / 1500 Вт (208 В чыңалууда)
Тtage240 Volts (or 208 Volts)
Күйүүчү май түрүЭлектр
Жылытуу каптооUp to 200 sq feet
Өлчөмдөрү (H x W x D)17 9/16" x 35" x 3 15/16" (approx. 17.56" x 35" x 3.94")
Элемент Салмагы18.9 фунт
ТүсАк
Монтаж түрүWall Mount (Surface-mount)
ӨзгөчөлүктөрElectronic Thermostat, Energy Efficient, Fast Heating, Noiseless
Diagram showing the dimensions of the Stelpro convector heater: 17 9/16 inches high, 35 inches wide, and 3 15/16 inches deep.

Сүрөт 4.1: Продукциянын өлчөмдөрү

5. Орнотуу

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Illustration showing a 240V hardwired electrical connection with a warning triangle icon.

Image 5.1: Hardwired Connection Requirement

5.1 Жылыткычты орнотуу

  1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
  2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
  3. Mark the drilling points on the wall using the concealed bracket as a template.
  4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
  5. Берилген бурамалар аркылуу монтаждык кронштейнди дубалга бекитиңиз.
  6. Ensure the bracket is level and securely fastened to support the heater's weight.
Image showing the concealed mounting bracket of the Stelpro convector heater, highlighting its 2000 Watts power, 5-year warranty, and totally quiet operation.

Image 5.2: Concealed Mounting Bracket

5.2 Электр зымдары

  1. Негизги автоматтык өчүргүчтө кубат ӨЧҮК экенин текшериңиз.
  2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
  3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
  4. Бардык туташууларды бекемдеңиз жана жылаңач зымдардын ачык калбаганын текшериңиз.
  5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
  6. Негизги өчүргүчтөгү кубатту калыбына келтириңиз.

6. Иштөө нускамалары

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Close-up of the Stelpro convector heater's built-in electronic thermostat with an LCD screen displaying '68°F'.

Image 6.1: Built-in Electronic Thermostat

6.1 Температураны коюу

  • Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
  • Жылыткыч автоматтык түрдө белгиленген температураны кармап турат.

6.2 Иштөө режимдери

  • Автоматтык режим: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
  • Коопсуздук режими: This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. Техникалык тейлөө

Үзгүлтүксүз тейлөө сиздин жылыткычыңыздын оптималдуу иштешин жана узак иштөөсүн камсыз кылат.

  • Тазалоо: Ensure the heater is turned off and cool before cleaning. Use a soft, damp Сыртын сүртүү үчүн чүпүрөк колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
  • Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
  • Жылдык текшерүү: It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. Кыйынчылыктарды

If your heater is not operating correctly, consult the following common issues before contacting support:

  • Жылыткыч күйбөй жатат: Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
  • Жетишсиз жылуулук: Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
  • адаттан тыш үндөр: While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
  • Thermostat Display Issues: If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. Кепилдик жана колдоо

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

  • 5 жылдык Чектелген Кепилдик on the overall unit.
  • Өмүр бою кепилдик жылытуу элементинде.
  • 3 жылдык кепилдик on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webсайт.

Тектеш документтер - ASHC2002W

Preview STELPRO ST252NP, ST302NP, ST402NP Программаланбаган термостаттын колдонуучунун колдонмосу жана орнотуу боюнча колдонмо
STELPRO ST252NP, ST302NP жана ST402NP программаланбаган электрондук термостаттарын орнотуу жана иштетүү боюнча кеңири колдонмо. Техникалык мүнөздөмөлөрдү, функцияларды жана кепилдик маалыматын камтыйт.
Preview Stelpro Non-Programmable Electronic Thermostat (ST252NP, ST302NP, ST402NP) - Owner's Manual and Installation Guide
Comprehensive owner's manual and installation guide for Stelpro non-programmable electronic thermostats (models ST252NP, ST302NP, ST402NP). Covers important safety instructions, technical specifications, installation steps, interface overview, initial settings, key features, and warranty information.
Preview STELPRO ST252NPFF/ST402NPFF Non-Programmable Electronic Thermostat Owner's Manual and Installation Guide
This owner's manual provides comprehensive instructions for installing and operating the STELPRO ST252NPFF and ST402NPFF non-programmable electronic thermostats. It covers technical specifications, initial settings, features, and troubleshooting for baseboard, convector, and fan heaters.
Preview STELPRO ST302P/ST402P Programmable Electronic Thermostat Owner's Manual and Installation Guide
Comprehensive owner's manual and installation guide for the STELPRO ST302P and ST402P programmable electronic thermostats. Covers setup, programming, features, technical specifications, and warranty information.
Preview STELPRO ST252NP, ST302NP, ST402NP Программаланбаган термостаттын колдонуучунун колдонмосу жана орнотуу боюнча колдонмо
Comprehensive owner's manual and installation guide for STELPRO's non-programmable electronic thermostats (ST252NP, ST302NP, ST402NP) for baseboards and convectors, covering features, setup, and technical specifications.
Preview STELPRO ST402PFF Программалануучу электрондук термостаттын ээсинин колдонмосу
Owner's manual for the STELPRO ST402PFF programmable electronic thermostat. Covers installation, initial settings, programming, features, and technical specifications for baseboard, convector, and fan heaters.