YITAMOTOR 3 Point Trailer Hitch

YITAMOTOR 3 Point Trailer Hitch with 2 Inch Receiver Instruction Manual

Model: 3 Point Trailer Hitch

Бренд: YITAMOTOR

1. Коопсуздук маалыматы

Please read and understand all safety warnings and instructions before installing or operating this product. Failure to follow these instructions may result in serious injury or property damage.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation and operation.
  • Ensure the tractor is turned off, in neutral, and the parking brake is engaged before attaching or detaching the hitch.
  • Verify that all pins and bolts are securely fastened before operating.
  • Do not exceed the maximum weight capacity of the hitch or your tractor's 3-point lift system.
  • Колдорду жана буттарды кыймылдуу бөлүктөрдөн алыс кармаңыз.
  • Refer to your tractor's owner's manual for specific 3-point hitch operation guidelines.

For additional safety details, please consult the official Коопсуздук жөнүндө маалымат PDF форматында.

2. Продукт бүтүп калдыview

The YITAMOTOR 3 Point Trailer Hitch is designed to convert your tractor's Category 1 three-point hitch into a standard 2-inch receiver, allowing for easy attachment of various implements such as trailers, tow hooks, and other compatible accessories.

Негизги өзгөчөлүктөрү:

  • Оор жүктүү курулуш: Made from alloy steel for durability and strength.
  • Коррозияга каршылык: Features a black powder-coated finish to prevent rust and corrosion, suitable for outdoor use.
  • Category 1 Compatibility: Designed for Category 1 tractors, including models from Kubota, John Deere, Mahindra, Ford, Yanmar, Massey Ferguson, and New Holland.
  • 2-Inch Receiver: Standard 2-inch x 2-inch receiver for versatile attachment options.
  • 7/8-Inch CAT 1 Lifting Pin: Equipped with a 7/8-inch diameter CAT 1 lifting pin for secure attachment.
  • Оңой орнотуу: Designed for quick and straightforward attachment and removal.
YITAMOTOR 3 Point Trailer Hitch

Image: The YITAMOTOR 3 Point Trailer Hitch, showcasing its robust black powder-coated steel frame and pin connections.

Кутуда эмне бар:

  • 1 x 3 Point Trailer Hitch 2" Receiver Assembly
  • Necessary Pins and Clips for Attachment
Package Contents of YITAMOTOR 3 Point Trailer Hitch

Image: Diagram showing the main hitch assembly and included pins, clips, and bushings for installation.

3. Орнотуу жана орнотуу

Follow these steps to properly install the 3 Point Trailer Hitch onto your Category 1 tractor.

  1. Тракторду даярдоо: Park the tractor on a level surface, engage the parking brake, and turn off the engine. Ensure the 3-point hitch arms are lowered.
  2. Attach Lower Lift Pins: Align the lower arms of your tractor's 3-point hitch with the lower pins on the YITAMOTOR hitch. Insert the pins through the tractor's lift arm holes and secure them with the provided clips.
  3. Attach Top Link Pin: Raise the tractor's 3-point hitch arms slightly to align the top link of the tractor with the upper mounting point of the YITAMOTOR hitch. Insert the top link pin and secure it with its clip.
  4. Байланыштарды текшерүү: Double-check that all three connection points (two lower lift arms, one top link) are securely pinned and clipped. Ensure there is no excessive play.
  5. Сыноо операциясы: Slowly raise and lower the 3-point hitch to confirm proper movement and stability of the attached YITAMOTOR hitch.
3 Point Trailer Hitch installed on a tractor

Image: A YITAMOTOR 3 Point Trailer Hitch attached to the rear of a tractor, ready for use.

Деталдаштырылган view of hitch components

Сүрөт: Жакын план views highlighting the heavy-duty bolts, the 2-inch receiver, and the easy-to-install pin mechanism.

4. Иштөө нускамалары

Once the YITAMOTOR 3 Point Trailer Hitch is securely installed, you can attach various implements to its 2-inch receiver.

  1. Attaching Implements: Insert the shank of your desired implement (e.g., trailer ball mount, tow hook) into the 2-inch receiver tube.
  2. Secure Implement: Align the pinholes and insert a hitch pin or locking pin (not included with this product) through the receiver and implement shank. Secure with a clip or lock.
  3. Бийиктикти жөндөө: Use your tractor's 3-point hitch controls to raise or lower the implement to the desired working height.
  4. Операция: Operate your tractor and implement according to their respective instruction manuals. Always maintain a safe speed and be aware of your surroundings.
  5. Detaching Implements: Park the tractor, engage the parking brake, and turn off the engine. Lower the 3-point hitch to relieve tension. Remove the hitch pin securing the implement, then slide the implement out of the receiver.
2-inch receiver detail on tractor hitch

Сүрөт: жакын план view of the 2-inch receiver integrated into the hitch, with an inset showing the 2"x2" dimension.

Tractor pulling a trailer with the hitch

Image: A green tractor utilizing the 3 Point Trailer Hitch to pull a small utility trailer.

5. Техникалык тейлөө

Regular maintenance will ensure the longevity and safe operation of your YITAMOTOR 3 Point Trailer Hitch.

  • Тазалоо: After each use, clean the hitch to remove dirt, mud, and debris. A pressure washer can be used, but avoid directing high-pressure spray directly at pivot points or pins.
  • Текшерүү: Periodically inspect the hitch for any signs of wear, damage, cracks, or corrosion. Pay close attention to welds, pinholes, and the receiver tube.
  • Майлоо: Apply a light coat of grease or lubricant to all pivot points and pins to ensure smooth operation and prevent rust.
  • Сактагыч: When not in use, store the hitch in a dry, protected area to prevent exposure to elements that could cause rust or damage.
  • Аппараттык камсыздоону текшерүү: Ensure all bolts and pins are tight and secure. Replace any worn or damaged hardware immediately.

6. Кыйынчылыктарды

This section addresses common issues you might encounter with your 3 Point Trailer Hitch.

КөйгөйМүмкүн себепЧечим
Hitch is difficult to attach/detach.Misalignment with tractor arms; rust/debris on pins.Ensure tractor is on level ground. Clean and lubricate pins. Adjust tractor's 3-point arms for proper alignment.
Implement wobbles in receiver.Incorrectly sized implement shank; worn receiver or shank.Ensure implement shank is a standard 2-inch size. Inspect receiver and shank for wear; replace if necessary. Use a hitch tightener if minor play is acceptable.
Hitch pins are stuck.Rust or dirt buildup; bent pin.Clean pins thoroughly. Apply penetrating oil. If bent, replace the pin.
Visible damage or cracks on hitch.Ашыкча жүктөө; таасир зыян; материалдык чарчоо.Дароо колдонууну токтотуңуз. Do not attempt to repair structural damage. Replace the hitch.

7. Техникалык шарттар

ӨзгөчөлүкСпецификация
БрендYITAMOTOR
Модел3 Point Trailer Hitch
МатериалЭритме болот
Аяктоо түрүПорошок капталган (Кара)
Кабылдагычтын өлчөмү2 дюйм x 2 дюйм
Трактор категориясы1-категория
Lower Lift Pin Diameter7/8 дюйм
Элемент СалмагыБолжол менен 27 фунт
Пакеттин өлчөмдөрүБолжол менен 23.4 x 23 x 7.5 дюйм
Тартуу күчү2500 Pounds Per Inch (Note: Actual towing capacity is limited by tractor and implement ratings)
Продукциянын өлчөмдөрүнүн диаграммасы

Image: A diagram illustrating the key dimensions of the YITAMOTOR 3 Point Trailer Hitch, including height, width, and receiver size.

8. Кепилдик жана колдоо

For warranty information, product support, or to purchase replacement parts, please contact YITAMOTOR customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

You can often find support information on the official YITAMOTOR webсайт же продукт сатылып алынган сатуучу аркылуу.

Тектеш документтер - 3 Point Trailer Hitch

Preview YITAMOTOR 5 FT тиштүү диск тырмоо сокосун чогултуу боюнча нускамалар
Ар кандай трактор маркалары үчүн Cat0&1 шаймандары менен шайкеш келген YITAMOTOR 5 FT тиштүү дисктүү тырма сокосу үчүн монтаждоо нускамалары.
Preview YITAMOTOR 3 чекиттүү чиркегичти монтаждоо нускамалары жана оператордун колдонмосу
YITAMOTOR 3 чекиттүү чиркегич кабылдагычтын трактордук тартма тиркемеси үчүн толук монтаждоо нускамалары жана оператордун колдонмосу. Коопсуздук эскертүүлөрүн, жоопкерчиликтен баш тартууну жана бөлүктүн идентификациясын камтыйт.
Preview YITAMOTOR 3 Point Hay Bale Spear Assembly Instructions & Operator's Manual | Cat 1 Tractor, 3000lb Capacity
Detailed assembly instructions and operator's manual for the YITAMOTOR 3 Point Hay Bale Spear. Includes part descriptions, safety warnings, risk acknowledgement, and contact information for Cat 1 tractors with a 3000lb lift capacity.
Preview YITAMOTOR 2 дюймдук прицепти кабылдагыч кош паллет айрылары адаптер тиркемесин монтаждоо нускамалары
YITAMOTOR 2" Прицепти Кабылдагыч Кош Палет Айыры Адаптердин Тиркемеси үчүн этап-этабы менен монтаждоо нускамалары. Тетиктердин тизмеси жана орнотуу көрсөтмөсү камтылган.
Preview YITAMOTOR 3 Point Landscape Rock Rake үчүн таза жана оңой монтаждоо нускамалары
YITAMOTOR тарабынан Pure & Easy Landscape Rock Rake тиркемеси үчүн толук монтаждоо көрсөтмөлөрү. Комплекстүү бөлүктөрдүн тизмесин, этап-этабы менен монтаждоо боюнча көрсөтмөлөрдү жана туура орнотуу үчүн маанилүү эскертүүлөрдү камтыйт.
Preview YITAMOTOR Clamp On Trailer Hitch Device Assembly Instructions and Safety Guide
Comprehensive assembly instructions, safety precautions, and operational guidance for the YITAMOTOR® Clamp On Trailer Hitch Device, ensuring safe and proper installation and use.