1. Киришүү
The Claber Meteocometa 6 Zone 8017 is a professional irrigation programmer designed for efficient management of watering systems, including drip irrigation and micro-irrigation. This device is capable of managing up to 6 independent irrigation zones and offers advanced programming features to optimize water usage.
Негизги өзгөчөлүктөр төмөнкүлөрдү камтыйт:
- Manages up to 6 zones with two independent programs (A and B).
- Supports up to 4 daily start times.
- Adjustable irrigation durations from 1 minute to 4 hours and 15 minutes.
- Weekly and cyclic programming options (up to 12 days).
- Includes water balance, rain stop, and test functions.
- Connectable to the Claber Rain Sensor for automatic rain detection.
- Equipped with an internal 230/24V 50/60Hz transformer and a 9V buffer battery for memory retention.
2. Орнотуу жана орнотуу
Before operating the Claber Meteocometa 8017, ensure proper installation and power connection.
2.1 Кубат туташтыруу
The programmer operates with an internal 230/24V 50/60Hz transformer. Connect the device to a suitable power outlet. A 9V buffer battery (not supplied) should be installed to maintain programming memory during power outages.
Figure 2.1: Claber Meteocometa 8017 with its power cord, ready for connection. This image shows the overall unit with the protective cover closed and the power cable extending from the side.
2.2 Zone Connections
Connect your irrigation valves to the corresponding zone terminals on the programmer. The device supports up to 6 independent zones.
2.3 Rain Sensor Connection (Optional)
The Meteocometa 8017 can be connected to a Claber Rain Sensor (sold separately) to automatically suspend irrigation during rainfall, conserving water. Refer to the Rain Sensor's manual for specific connection instructions.
3. Иштөө нускамалары
The control panel allows for easy programming and management of irrigation cycles.
Сүрөт 3.1: Алдыңкы view of the Claber Meteocometa 8017 control panel with the protective cover open, showing the LCD display, navigation buttons (A, B, EXIT, ENTER), and programming keys.
3.1 Алгачкы убакытты жана датаны орнотуу
- басыңыз ENTER негизги менюга кирүү үчүн баскычты басыңыз.
- Боюнча чабыттоо A or B buttons to select "SET TIME" or "SET DATE".
- Басыңыз ENTER ырастоо жана колдонуу A or B баалуулуктарды тууралоо үчүн.
- Басыңыз ENTER to move to the next field or confirm the setting.
- Басыңыз ЧЫГУУ негизги дисплейге кайтуу.
3.2 Programming Irrigation Cycles
The programmer supports two independent programs, A and B, for flexible scheduling.
3.2.1 Setting Program A/B
- From the main display, press ENTER.
- Navigate to "PROGRAM A" or "PROGRAM B" using A or B.
- Басыңыз ENTER.
- Орнотуу үчүн экрандагы көрсөтмөлөрдү аткарыңыз:
- Баштоо убактысы: Up to 4 per day.
- Сугаттын узактыгы: For each zone, from 1 minute to 4 hours and 15 minutes.
- Аптанын күндөрү: Select specific days for irrigation.
- Cyclic Programming: Set irrigation cycles up to 12 days (e.g., every 2 days).
- Колдонуу A or B баалуулуктарды тууралоо үчүн жана ENTER ырастоо үчүн.
- Басыңыз ЧЫГУУ to save and return.
3.2.2 Кол менен иштетүү
To manually start or stop irrigation for a specific zone:
- басыңыз КОЛ баскычы.
- Колдонуу A or B to select the desired zone.
- Басыңыз ENTER to start irrigation. Press again to stop.
3.2.3 Rain Stop Function
If a Rain Sensor is connected, the system will automatically pause irrigation during rain. You can also manually activate the rain stop function from the menu if needed.
3.2.4 Water Balance Function
This feature allows for seasonal adjustment of irrigation durations across all active programs. Access it through the main menu to increase or decrease watering times by a percentage.
3.2.5 Сыноо функциясы
The test function allows you to quickly run through all programmed zones for a short duration to verify connections and operation. Access it from the main menu.
4. Техникалык тейлөө
Regular maintenance ensures the longevity and optimal performance of your Claber Meteocometa 8017.
- Тазалоо: Periodically wipe the exterior of the programmer with a soft, damp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Батареяны текшерүү: If a 9V buffer battery is installed, check its charge annually and replace it if necessary to prevent loss of programming during power outages.
- Курчап турган чөйрөнү коргоо: Ensure the programmer is installed in a location protected from direct sunlight, extreme temperatures, and heavy rain, unless specifically designed for outdoor exposure.
5. Кыйынчылыктарды
Бул бөлүмдө сиз кабылышы мүмкүн болгон жалпы маселелерди чечүү жолдору каралган.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Программисттин дисплейи бош. | No power supply or faulty transformer. | Check power outlet and transformer connection. Ensure the outlet is active. |
| Irrigation does not start. | Incorrect programming, valves not connected, or rain sensor active. | Verify program settings (start times, durations, days). Check valve wiring. Ensure rain sensor is dry or temporarily bypass it for testing. |
| Programmer loses settings after power outage. | 9V buffer battery is dead or not installed. | Install a new 9V alkaline battery or replace the existing one. |
| Watering continues during rain. | Rain sensor not connected or faulty. | Check rain sensor connection. Ensure the sensor is clean and functioning correctly. |
If the problem persists after attempting these solutions, please contact Claber customer support or a qualified technician.
6. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | Meteocometa 8017 |
| Zones Managed | 6кө чейин көз карандысыз зоналар |
| Программалар | 2 independent (A and B) |
| Daily Start Times | Up to 4 per day per program |
| Irrigation Duration | 1 мүнөттөн 4 саат 15 мүнөткө чейин |
| Программалоо параметрлери | Weekly, Cyclic (up to 12 days) |
| Атайын функциялар | Water balance, Rain stop, Test function |
| Электр камсыздоо | Internal transformer 230/24V 50/60Hz |
| Buffer Battery | 9V (not supplied) for memory retention |
| Rain Sensor Compatibility | Yes, with Claber Rain Sensor |
| ASIN | B09X68B4QW |
| Биринчи жеткиликтүү күн | 16-ноябрь, 2023-жыл |
7. Кепилдик жана колдоо
Specific warranty information for the Claber Meteocometa 8017 is not provided in this manual. For details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your purchase or visit the official Claber webсайт.
For technical support, spare parts, or service inquiries, please contact Claber customer service through their official channels. Ensure you have your product model number (8017) and purchase details available when seeking support.
