Xanlite SO1811AN Solar Wall Light Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Xanlite SO1811AN Solar Wall Light. Designed for outdoor use, this solar-powered light features a motion detector and offers efficient illumination for various outdoor spaces.

Коопсуздук маалыматы

• Ensure the product is installed in a location that receives direct sunlight for optimal charging.
• Продукцияны бөлүктөргө бөлүүгө же өзгөртүүгө аракет кылбаңыз. Бул кепилдикти жокко чыгарып, коопсуздукка коркунуч келтириши мүмкүн.
• Натыйжалуу кубаттоо үчүн күн панелин таза кармаңыз.
• This product is designed for outdoor use and is rated IP44 for water resistance. However, avoid submerging it in water.
• Handle with care during installation to prevent damage to the light or injury.

Пакеттин мазмуну

• 1 x Xanlite SO1811AN Solar Wall Light with Motion Detector
• Монтаждоо бурамалар жана дубал сайгычтар

Figure 1: The Xanlite SO1811AN Solar Wall Light, showcasing its design with the integrated solar panel on top and motion sensor at the base.

Орнотуу жана орнотуу

The Xanlite SO1811AN is designed for wall mounting. Proper placement is crucial for optimal solar charging and motion detection.

Орнотуу ордун тандоо

1. Select a location that receives at least 6-8 hours of direct sunlight daily to ensure the solar panel charges effectively.
2. Ensure the motion sensor is not obstructed and can cover the desired detection area.
3. Avoid installing near other strong light sources (e.g., streetlights) as they may interfere with the light sensor and prevent the light from activating.

Figure 2: The solar wall light installed on an exterior wall, demonstrating its placement for effective outdoor illumination.

Монтаждоо кадамдары

1. Бургулоо пункттарын белгилөө: Hold the light against the wall at your chosen installation spot. Use a pencil to mark the positions for the mounting screws through the pre-drilled holes on the light's base.
2. Бургулоо тешиктери: Use an appropriate drill bit (e.g., 6mm) to drill holes at the marked points. The depth should be sufficient for the wall plugs.
3. Дубалга сайгычтарды салуу: Insert the plastic wall plugs into the drilled holes, ensuring they are flush with the wall surface.
4. Жарыкты коргоо: Align the light's mounting holes with the wall plugs. Insert the screws through the light's base and tighten them firmly into the wall plugs until the light is securely fastened to the wall.

Figure 3: Technical drawing showing the dimensions of the solar wall light, useful for planning installation space.

Иштөө нускамалары

The Xanlite SO1811AN features an automatic motion sensor and multiple operating modes. The light will automatically charge during the day and activate at night.

Баштапкы активдештирүү

Before first use, ensure the light is exposed to direct sunlight for at least 8 hours to fully charge the internal battery. Locate the mode selection button, usually near the motion sensor.

4-сүрөт: деталдуу view of the motion sensor and the mode selection button (small button below the sensor) on the light fixture.

Иштөө режимдери

Press the mode selection button repeatedly to cycle through the available modes:

• Mode 1 (Dim + Bright on Motion): The light stays on at a dim brightness (e.g., 100 lumens) throughout the night. When motion is detected, it brightens to full brightness (600 lumens) for approximately 20-30 seconds, then returns to dim.
• Mode 2 (Off + Bright on Motion): The light remains off at night. When motion is detected, it turns on at full brightness (600 lumens) for approximately 20-30 seconds, then turns off.
• Mode 3 (Constant Dim Light): The light stays on at a constant dim brightness (e.g., 100 lumens) throughout the night, regardless of motion. This mode is ideal for continuous ambient lighting.
• Өчүк: Pressing the button again after Mode 3 will turn the light off completely.

The light will automatically detect dusk and dawn, turning on and off accordingly based on the selected mode.

Figure 5: The solar wall light providing illumination during nighttime, demonstrating its operational capability.

Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your solar wall light.

• Күн панелин тазалоо: Мезгил-мезгили менен күн панелин жумшак, гamp чаңды, кирди, жалбырактарды же карды кетирүү үчүн кездеме. Таза панель күн нурун максималдуу сиңирүүнү жана заряддоонун натыйжалуулугун камсыз кылат.
• Жарыктыкты тазалоо: Wipe the entire fixture with a soft, damp cloth to keep it clean. Avoid using abrasive cleaners or solvents.
• Тоскоолдуктарды текшерүү: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight to the solar panel or interfering with the motion sensor's field of view.

Сүрөт 6: Жакын пландан view of the solar panel, highlighting the importance of keeping it clean for efficient energy absorption.

Проблемаларды чечүү

If your Xanlite SO1811AN Solar Wall Light is not functioning as expected, try the following troubleshooting steps:

Техникалык шарттар

Figure 7: An infographic summarizing key features of the Xanlite SO1811AN, including its IP44 rating, motion sensor, durable steel material, and 600 lumens output.

Кардарларды колдоо

Xanlite is committed to providing quality products and excellent customer service. If you have any questions, concerns, or require assistance with your SO1811AN Solar Wall Light, please do not hesitate to contact us. Your satisfaction is our priority.

Сураныч, чекене сатуучунун маалыматына кайрылыңыз website or your purchase documentation for specific contact information.