Introduction
The TOA SR-S4S is a high-performance, two-way line array speaker system designed for short-distance sound transmission. Its unique design allows for precise sound projection and consistent audio levels across various distances. This manual provides essential information for the proper setup, operation, and maintenance of your SR-S4S speaker system.
Коопсуздук маалыматы
Жеке жаракаттарды жана жабдууларга зыян келтирбөө үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Кубат булагы: Ensure the speaker is connected to a power source that matches its voltagд талаптар.
- Вентиляция: Вентиляция тешиктерин жаап албаңыз. Ашыкча ысып кетүүнүн алдын алуу үчүн аппараттын айланасында адекваттуу аба агымын камсыз кылыңыз.
- Нымдуулук: Keep the speaker away from water or excessive moisture. This product is not waterproof.
- Монтаждоо: When mounting, ensure the structure can support the speaker's weight (approximately 16 kg / 42.8 pounds). Use appropriate mounting hardware and follow all local building codes.
- Тейлөө: Бул продуктту өзүңүз тейлөөгө аракет кылбаңыз. Бардык тейлөөнү квалификациялуу тейлөө кызматкерлерине тапшырыңыз.
Продукт бүттүview
The SR-S4S speaker system is engineered for optimal sound distribution, featuring a robust design and advanced acoustic components.
Сүрөт: алдыңкы view of the TOA SR-S4S Short Throw 2-Way Line Array Speaker System. The speaker is a tall, slender, rectangular unit with a perforated metal grille covering the front face. The enclosure is light gray, and visible bolts secure the side panels. The TOA logo is subtly visible near the bottom of the grille.
Негизги өзгөчөлүктөрү:
- Equipped with eight 10cm woofers for powerful low-frequency output.
- Features 24 small tweeters for clear high-frequency sound reproduction.
- Linear sound source effect minimizes energy attenuation over distance, enhancing long-distance sound projection.
- Suppressed vertical sound dispersion directs sound precisely to the target area.
- Maintains consistent sound pressure levels, preventing excessive loudness near the speaker.
- Allows for configuration of longer sound sources by joining 2 or 3 speakers, increasing projection distance and volume.
- Includes a built-in network circuit for single amplifier drive.
- Can be converted to a bi-amplifier drive system by modifying internal connections.
- Supports high-impedance applications with the optional MT-S0601 Matching Transformer.
Жайгашуу
Follow these steps for the initial setup of your SR-S4S speaker system:
- Пакеттен чыгаруу: Carefully remove the speaker from its packaging. Inspect for any signs of damage during transit.
- Жайгашкан жери: Position the speaker in the desired location. Ensure it is on a stable, level surface or securely mounted according to professional installation guidelines. Consider the speaker's directivity angle (90° Horizontal / 10° Vertical) for optimal sound coverage.
- Байланыш: Динамикти өзүңүзгө туташтырыңыз amplifier using appropriate speaker cables. The SR-S4S features M5 screw terminals and Neutrik NL4MP x2 input connectors. Ensure correct polarity (+ to + and - to -).
- Optional Bi-Amping: If using a bi-amplifier drive system, refer to the detailed wiring diagram in the advanced setup guide (not included in this manual) for internal connection changes.
- Optional Matching Transformer: For high-impedance applications, install the optional MT-S0601 Matching Transformer as per its instructions.
- Күйгүзүү: Бардык байланыштар коопсуз болгондон кийин, күйгүзүңүз amplifier and audio source. Start with the volume at its lowest setting.
Иштеп жатат
Operating the SR-S4S is straightforward once properly set up:
- Үндү көзөмөлдөө: Үн деңгээлин колдонуп тууралаңыз amplifier's controls. Avoid setting the volume too high, which can cause distortion or damage to the speaker.
- Үн оптималдаштыруу: For optimal sound quality, consider using a digital processor like the DP-0206 (optional) to fine-tune the frequency response.
- Системалык интеграция: The SR-S4S is designed to integrate seamlessly into various audio setups, from small venues to larger installations requiring precise sound projection.
Техникалык тейлөө
Regular maintenance ensures the longevity and performance of your SR-S4S speaker system:
- Тазалоо: Use a soft, dry cloth to wipe down the exterior of the speaker. Do not use abrasive cleaners, solvents, or excessive moisture.
- Текшерүү: Periodically check all cable connections for tightness and signs of wear. Ensure mounting hardware remains secure.
- Сактагыч: If storing the speaker for an extended period, keep it in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.
Проблемаларды чечүү
If you encounter issues with your SR-S4S speaker, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Үн чыгышы жок | Бош же туура эмес кабелдик байланыштар Ampкөтөргүч күйгүзүлгөн эмес Туура эмес киргизүү тандоосу күйүк ampөмүрлүү | Бардык динамиктерди текшериңиз жана ampкөтөргүч байланыштар. камсыз кылуу ampкөтөргүч күйгүзүлүп, иштеп жатат. Verify correct input source is selected on ampөмүрлүү. |
| Бурмаланган үн | Көлөмү өтө бийик Бузулган динамик кабели Ampкөтөргүч кесүү | Үн деңгээлин азайтыңыз. Динамик кабелдеринин бузулгандыгын текшериңиз; зарыл болсо, алмаштырыңыз. Текшерүү amplifier's output level and ensure it's not overdriven. |
| Үзүлбөгөн үн | Бошоң байланыш Бузулган кабель | Бардык байланыштарды коргоңуз. Try a different speaker cable to isolate the issue. |
If the problem persists after attempting these solutions, contact TOA customer support or a qualified service technician.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Короонун түрү | Басс-рефлекс түрү |
| Энергия менен иштөө кубаттуулугу | Continuous program 600W |
| Номиналдуу импеданс | 8Ω |
| Сезимталдуулук (1Вт, 1м) | 93дБ |
| Frequency Response | 70-20000Hz (when using DP-0206 (option)) |
| Crossover Frequency | 3500Hz |
| Directivity Angle | Туурасынан: 90°, Вертикалдуу: 10° |
| Low Frequency Component | 10cm cone-type x8 |
| High Frequency Component | 2.5cm balanced dome-type x24 |
| Киргизүү туташтыргычтары | M5 screw terminal, distance between barriers: 12.2mm and Neutrik NL4MP x2 |
| Өлчөмдөрү (W x Y x D) | х 160mm 892 х 303 (6.3 х 35.1 х 11.9 дюйм) |
| Салмагы | 16 kg (35.3 lbs) / Item Weight: 42.8 pounds (from product data) |
| Модель номери | SR-S4S |
Кепилдик жана колдоо
For warranty information, please refer to the warranty card included with your product or visit the official TOA website. For technical support, replacement parts, or service inquiries, please contact TOA customer service through their official channels. Provide your product model number (SR-S4S) and serial number when contacting support.
TOA Electronics
Manufacturer of the SR-S4S Line Array Speaker System.
