Milwaukee M18 TOP-OFF 175W кубат булагы боюнча колдонмо

1. Киришүү

The Milwaukee M18 TOP-OFF 175W Power Supply transforms any Milwaukee M18 battery into a portable power source, providing convenient power for small electronic devices. This compact and lightweight unit is designed for versatility, allowing users to charge phones, laptops, and other small devices on job sites, during camping, or in any situation where traditional power outlets are unavailable.

2. Коопсуздук маалыматы

Always observe basic safety precautions when using this product to reduce the risk of fire, electric shock, or personal injury. Read all instructions before use.

• Use only with Milwaukee M18 REDLITHIUM batteries.
• Электр менен жабдууну жамгырга же нымдуу шарттарга дуушар кылбаңыз.
• Do not use the power supply if it has been subjected to sharp blows, dropped, or otherwise damaged.
• Ашыкча ысып кетүүнүн алдын алуу үчүн туура желдетүүнү камсыз кылыңыз.
• Do not attempt to power appliances that exceed the unit's 175W continuous output.
• Keep children away from the power supply during operation.

3. Продукт бүтүп калдыview

Figure 1: Milwaukee M18 TOP-OFF 175W Power Supply with integrated rafter hook.

Негизги өзгөчөлүктөрү:

• Чыгуу кубаттуулугу: Includes (1) AC 120V outlet, (1) USB-C PD (45W) port, and (1) USB-A (2.4A) port.
• Бир убакта заряддоо: Capable of powering or charging up to 3 devices at a time.
• Үзгүлтүксүз Wattage: Provides 175W continuous power.
• Батарея шайкештиги: Designed to fit all Milwaukee M18 batteries.
• Көчүрүү мүмкүнчүлүгү: Features a rafter hook for versatile hanging on job sites or during travel.

4. Орнотуу

1. Батарея салыңыз: Align a charged Milwaukee M18 battery with the battery slot on the power supply. Slide the battery firmly into place until it clicks, indicating a secure connection.
2. Батарея деңгээлин текшерүү: The power supply may have an indicator to show the remaining battery charge. Ensure the battery has sufficient charge for your intended use.

5. Иштөө нускамалары

1. Күйгүзүү: Once the M18 battery is securely attached, press the power button corresponding to the desired output port (AC, USB-C, or USB-A). An indicator light will illuminate to confirm the port is active.
2. AC розеткасын колдонуу: Plug your 120V AC device into the AC outlet. Ensure the device's power consumption does not exceed 175W.
3. USB портторун колдонуу: Connect your USB-compatible devices to the USB-C (45W) or USB-A (2.4A) ports using appropriate cables.
4. Өчүрүү: To turn off an active port, press its corresponding power button again. To completely power down the unit, remove the M18 battery.
5. Using the Rafter Hook: The integrated rafter hook can be rotated and extended to hang the power supply from various surfaces, such as toolboxes, ladders, or vehicle armrests, keeping it conveniently accessible and out of the way.

6. Техникалык тейлөө

• Keep the power supply clean and free of dust and debris. Use a soft, dry cloth for cleaning.
• Store the unit in a dry place, away from direct sunlight and extreme temperatures.
• Regularly inspect the unit and battery for any signs of damage. Do not use if damaged.

7. Кыйынчылыктарды

• Эч кандай кубаттуулугу жок: Ensure the M18 battery is fully charged and securely connected. Verify that the specific output port has been activated by pressing its power button.
• Түзмөк кубатталбай жатат: Check that the connected device is compatible with the power supply's output specifications (voltagе/ватtage). Ensure the charging cable is not damaged.
• Ашыкча жүктөн коргоо: If the power supply stops providing power, it may be due to an overload. Disconnect the device(s), wait a few moments, and then try again with lower power-consuming devices.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information or technical support, please refer to the official Milwaukee Tool webсайтка же кардарларды тейлөөгө кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.