YOBRO Candy Dispenser Instruction Manual

1. Продукт бүтүп калдыview

The YOBRO Candy Dispenser (Model WSG11291) is a compact, manual device designed to dispense small candies and snacks. Its simple operation and easy maintenance make it suitable for various settings.

Сүрөт 1.1: Алдыңкы view of the YOBRO Candy Dispenser, showcasing its design and candy compartment.

Сүрөт 1.2: Бурчтуу view of the YOBRO Candy Dispenser, highlighting its compact size.

2. Орнотуу жана толтуруу

Follow these steps to prepare your YOBRO Candy Dispenser for use:

1. Бөлүп салуу: Gently remove the back panel of the dispenser.
2. Таза: Before first use, hand wash all removable parts with mild soap and water. Ensure all parts are completely dry before reassembly.
3. Толтуруу: Carefully pour your desired candies into the main compartment.
4. Кайра чогултуу: Securely attach the back panel. Ensure it clicks into place to prevent accidental detachment.

Image 2.1: Visual guide for disassembling, filling, and reassembling the candy dispenser.

Important Considerations for Candy Selection:

• The dispenser is designed for mini candies and snacks.
• Do not use gummy candies, as they may stick and cause blockages.
• Candies should be under 1 inch (approximately 20mm) in length or diameter to ensure proper dispensing.

Image 2.2: Illustration of the candy size limitation, indicating suitability for candies under 1 inch.

Image 2.3: The dispenser can hold approximately 16 ounces of candy.

3. Иштөө нускамалары

To dispense candies, simply pull the lever located on the front right side of the machine. A small portion of candy will be released into the collection tray at the bottom.

Image 3.1: Demonstrating the action of pulling the dispensing lever.

Image 3.2: Candies falling into the collection tray after the lever is pulled.

4. Техникалык тейлөө жана кам көрүү

Regular cleaning ensures hygiene and optimal performance of your candy dispenser.

• Тазалоо: Disassemble the dispenser as shown in Section 2. Hand wash all parts with warm, soapy water. Rinse thoroughly and allow to air dry completely before reassembly.
• Сактагыч: Store the dispenser in a cool, dry place away from direct sunlight when not in use.

5. Кыйынчылыктарды

If you encounter issues with your YOBRO Candy Dispenser, refer to the following common problems and solutions:

• Candies not dispensing or lever is stiff:
  • Ensure the candies are not gummy or sticky.
  • Verify that the candies are within the recommended size (under 1 inch). Overly large candies can cause blockages.
  • Check for any foreign objects obstructing the dispensing mechanism.
• Back panel detaches easily:
  • Ensure the back panel is securely fastened after filling. Apply gentle pressure until it clicks into place.
• Dispensing lever feels loose or damaged:
  • Operate the lever with gentle, consistent force. Avoid excessive pulling or twisting.

6. Техникалык шарттар