Arebos 500W стенддик бургулоочу станогунун колдонуучу колдонмосу

1. Киришүү жана коопсуздук боюнча көрсөтмөлөр

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Arebos 500W Bench Drill Press. Please read and understand all instructions before using the machine.

Жалпы коопсуздук эскертүүлөрү

• Ар дайым тиешелүү жеке коргоочу шаймандарды (ЖКК), анын ичинде коопсуздук көз айнектерин, угууну коргоочу жана кол каптарды кийиңиз.
• Иш аянты таза, жакшы жарык жана тоскоолдуктар жок болушун камсыз кылыңыз.
• Балдарды жана жанындагыларды иштеп жаткан машинадан алыс кармаңыз.
• Securely fasten the drill press to a stable workbench to prevent tipping or movement during operation.
• Disconnect the power supply before making any adjustments, changing accessories, or performing maintenance.
• Never operate the drill press if any parts are damaged or missing.
• Ар дайым clamp the workpiece securely using the provided vise or other suitable clamping devices. Never hold the workpiece by hand.
• Select the correct drill speed for the material and drill bit size.
• Avoid loose clothing, jewelry, and long hair that could get caught in moving parts.

Figure 1: ашыкview of the Arebos 500W Bench Drill Press with the included workpiece vise.

2. Продукциянын компоненттери

Familiarize yourself with the main components of your drill press:

• Мотор корпусу: Contains the 500W motor and speed adjustment mechanism.
• Кубат которгучу: On/Off switch, often with a safety cover.
• Тереңдик токтотуу: For setting precise drilling depth.
• Чак: Holds the drill bit (13mm key chuck).
• Chuck Guard: Transparent guard for safety.
• Лазердик колдонмо: Projects crosshairs for accurate positioning.
• Feed Handles: Used to lower the chuck and drill bit.
• Мамыча: Vertical support for the head and table.
• Workpiece Table: Adjustable height and tiltable platform for securing workpieces.
• Стол кулпусу: Secures the workpiece table at the desired height.
• Негизги: Provides stability for the entire unit.
• Workpiece Vise: Included accessory for clamping materials.

Figure 2: Key features of the drill press, including the 500W motor, height-adjustable workpiece table, and 5 speed settings.

3. Орнотуу жана чогултуу

Баштапкы орнотуу жана чогултуу үчүн төмөнкү кадамдарды аткарыңыз:

1. Пакеттен чыгаруу: Carefully remove all components from the packaging. Check for any damage during transit and ensure all parts are present according to the packing list.
2. Негизги жана мамычанын жыйындысы: Securely attach the column to the base using the provided bolts and washers. Ensure it is firmly tightened.
3. Башкы Ассамблея: Mount the drill head assembly onto the top of the column. Tighten the securing bolts.
4. Workpiece Table Installation: Slide the workpiece table assembly onto the column. Adjust its height and secure it with the table lock handle.
5. Чак орнотуу: Clean the tapered shaft of the chuck and the spindle. Insert the chuck onto the spindle with a firm upward push to seat it properly.
6. Vise Attachment: The included workpiece vise can be bolted to the workpiece table using the slots provided.
7. Mounting the Machine: For stability and safety, bolt the drill press to a sturdy workbench using the holes in the base.

Figure 3: The drill press assembled with a drill bit in the chuck and the workpiece vise attached to the table.

4. Иштөө нускамалары

4.1. Selecting Drill Speed

The drill press offers 5 variable speed settings (550 to 2500 RPM) suitable for various materials. To change the speed:

1. Машинаны электр кубатынан ажыратыңыз.
2. Open the belt cover on top of the motor housing.
3. Adjust the V-belt position on the pulleys according to the speed chart inside the cover.
4. Ensure the belt is taut and close the cover before reconnecting power.

Жалпы ылдамдык эрежелери:

• Lower Speeds: For larger drill bits, harder materials (metals), and plastics.
• Higher Speeds: For smaller drill bits, softer materials (wood), and plastics.

Figure 4: The belt drive system located under the top cover, used to adjust drilling speeds.

4.2. Installing a Drill Bit

1. Машинанын розеткадан ажыратылганын текшериңиз.
2. Open the chuck jaws using the chuck key.
3. Insert the drill bit into the chuck, ensuring it is centered and seated firmly.
4. Tighten the chuck jaws securely with the chuck key. Remove the chuck key immediately after tightening.

4.3. Adjusting Workpiece Table

The workpiece table can be adjusted for height and angle:

• Бийиктигин тууралоо: Loosen the table lock handle. Raise or lower the table to the desired height. Retighten the handle firmly.
• Бурчту тууралоо: Loosen the tilt bolt beneath the table. Tilt the table to the desired angle (up to 45 degrees). Retighten the bolt.

Figure 5: The workpiece table can be adjusted vertically along the column and tilted for angled drilling.

4.4. Лазердик жол көрсөткүчтү колдонуу

The integrated laser guide assists in precise drilling:

1. Turn on the laser guide using its dedicated switch (if separate from main power).
2. Position your workpiece so that the laser crosshairs align with your desired drilling point.
3. Secure the workpiece firmly with the vise or clamps.

Figure 6: The laser guide projects a crosshair onto the workpiece, indicating the exact drilling point.

4.5. Бургулоо иштери

1. Даярдоочу бөлүктүн бекем clampдасторконго.
2. Adjust the depth stop if a specific drilling depth is required.
3. Turn on the drill press.
4. Slowly lower the drill bit into the workpiece using the feed handles. Apply steady, even pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely and turn off the machine.
7. Wait for the spindle to stop completely before removing the workpiece.

Figure 7: A workpiece securely clamped in the vise during a drilling operation.

5. Техникалык тейлөө

Regular maintenance ensures the longevity and safe operation of your drill press.

• Тазалоо: After each use, clean the machine of dust, chips, and debris. Use a brush or vacuum cleaner. Do not use solvents that may damage painted surfaces or plastic parts.
• Майлоо: Periodically apply a light machine oil to moving parts such as the column, spindle, and feed mechanism to ensure smooth operation and prevent rust.
• Белдик текшерүү: Regularly check the V-belt for wear, cracks, or damage. Replace if necessary. Ensure proper tension.
• Чакты тейлөө: Чакан жаактарды таза жана таштандылардан тазалаңыз. Катуу болуп калса, патрондун ачкычынын механизмине бир аз өлчөмдө май сүйкөңүз.
• Электр зымы: Inspect the power cord for any signs of damage. Do not use the machine if the cord is frayed or damaged.

6. Кыйынчылыктарды

Бул бөлүм сиз кабылышы мүмкүн болгон жалпы көйгөйлөрдү карайт:

Эгерде сиз бул жерде көрсөтүлбөгөн көйгөйлөргө туш болсоңуз же чечимдер көйгөйдү чечпесе, кардарларды колдоо кызматына кайрылыңыз.

7. Техникалык шарттар

8-сүрөт: Өлчөмдүүview of the Arebos Bench Drill Press.

8. Кепилдик жана Кардарларды колдоо

For warranty information, service, or technical support, please refer to the documentation included with your product or contact the manufacturer directly. The manufacturer is Canbolat Vertriebs GmbH.

Сураныч, кепилдик дооматтар үчүн сатып алуу далилиңизди сактап коюңуз.