FLEXISPOT E6 Essential (ET365) Electric Standing Desk User Manual

1. Киришүү

This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your FLEXISPOT E6 Essential (ET365) Electric Standing Desk. Please read this manual thoroughly before use to ensure safe and efficient operation.

2. Коопсуздук маалыматы

• Ensure the desk is loaded within the recommended maximum weight limit of 220 lbs (100 kg) to maintain stability and prevent damage.
• Adjust the desk height according to individual user heights to utilize the 3-stage lift system's full range and ensure optimal stability.
• Иш учурунда балдарды жана үй жаныбарларын столдон алыс кармаңыз.
• Суюктуктарды түздөн-түз башкаруу панелине же электрдик тетиктердин жанына коюудан алыс болуңуз.
• Do not disassemble or modify the desk's electrical components. Contact customer support for service.
• Ensure all cables are properly managed to prevent tripping hazards and damage during height adjustments.

3. Пакеттин мазмуну

Your FLEXISPOT E6 Essential desk ships in two boxes. Please verify all components are present before beginning assembly.

Камтылган компоненттер:

• Desktop (One-Piece Maple Top, 48"x30")
• Үстөл алкагы (Ак)
• Dual Motor Lift System
• Эстутум алдын ала орнотуулары менен башкаруу панели
• Assembly Hardware (screws, wrenches, cable clips)
• Кубаттуу адаптер жана кабелдер
• Instruction Manual

Image: All components of the FLEXISPOT E6 Essential desk laid out for assembly, including the desktop, frame parts, control panel, and tools.

4. Орнотуу жана чогултуу

Assembly typically requires one person and takes approximately 1 hour. Follow the steps below for a smooth setup.

4.1 Кутудан чыгаруу жана даярдоо

1. Carefully open both boxes and remove all components.
2. Place the desktop upside down on a soft, clean surface (e.g., carpet or a blanket) to prevent scratches.
3. Verify all parts against the package contents list.

4.2 Рамка монтажы

1. Attach the lifting columns to the crossbeams using the provided screws and tools. Ensure screws are aligned with square holes and tightened securely.
2. Connect the feet to the bottom of the lifting columns.
3. Adjust the frame width to match your 48"x30" desktop.

Video: Official installation guide for the FLEXISPOT E6 Essential desk, detailing frame assembly and desktop attachment.

4.3 Иш столунун тиркемеси

1. Center the assembled frame onto the underside of the desktop.
2. Secure the frame to the desktop using the provided screws. Pre-drilled holes may be present; if not, carefully drill pilot holes.
3. Attach the control panel to the underside of the desktop, ensuring it is flush with the edge.

Сүрөт: Жакын план view of the intelligent keypad control panel with LED display and memory presets, located on the underside of the desktop.

4.4 Кабелди башкаруу

1. Connect the dual motors, control panel, and power adapter according to the labels.
2. Utilize the built-in cable management tray and magnetic cover cloth to organize and conceal all wires.
3. Ensure cables have enough slack to accommodate full height adjustment without tension.

Сүрөт: асты view of the FLEXISPOT E6 desk showing organized cables within the cable management system.

5. Иштөө нускамалары

5.1 Бийиктигин тууралоо

• колдонуу Өйдө (▲) жана Төмөн (▼) arrow buttons on the control panel to manually adjust the desk height. The LED display will show the current height.
• Столдо 3-s барtage lift system, allowing height adjustments from 23.6" to 48.8".

5.2 Эстутум алдын ала орнотуулары

• The control panel has four memory buttons (1, 2, 3, 4) to save your preferred sitting and standing heights.
• To save a height: Adjust the desk to your desired height, then press the 'М' button followed by one of the number buttons (1-4). The display will confirm the setting.
• To recall a saved height: Simply press the corresponding number button (1-4). The desk will automatically move to the saved position.

5.3 Кагылышууга каршы система

• The desk is equipped with an anti-collision system that detects obstacles during height adjustment. If an obstacle is detected, the desk will stop and reverse slightly to prevent damage.
• Collision sensitivity can typically be adjusted via the control panel settings (refer to the full manual for detailed instructions).

Image: Diagram illustrating the anti-collision system of the FLEXISPOT E6 desk, showing it stopping upon encountering an obstacle.

6. Негизги өзгөчөлүктөрү

• Spacious One-Piece Desktop: A 48"x30" whole-piece maple desktop provides ampбир нече мониторлор жана аксессуарлар үчүн орун.
• 3-Сtage Dual Motor Lift System: Offers a wide height adjustment range from 23.6" to 48.8" with smooth and quiet operation (under 50 dB).
• Жогорку жүк кубаттуулугу: Supports up to 220 lbs (100 kg), accommodating various office equipment.
• Programmable Control Panel: Features an LED display and four memory presets for quick height adjustments.
• Мыкты курулуш: Built with a strong steel structure for enhanced stability and durability.
• FSC-Certified Desktop: Tabletop made from responsibly sourced wood.

Сүрөт: деталдуу view of the intelligent keypad, highlighting the LED display, memory presets, and up/down controls.

Image: Visual representation of the desk's 220 lbs maximum load capacity, showing two 110 lbs weights on the desktop.

7. Техникалык тейлөө

• Бардык бурамалар менен болттордун бекемдигин текшерүү үчүн дайыма текшерип туруңуз.
• Clean the desktop surface with a soft, damp кездеме. Катуу химиялык заттардан алыс болуңуз.
• Keep the electrical components dry and free from dust.
• Кабельдерди мезгил-мезгили менен эскирүү же бузулуу белгилерин текшерип туруңуз.

8. Кыйынчылыктарды

9. Техникалык шарттар

10. Кепилдик жана колдоо

FLEXISPOT offers the following warranty for your E6 Essential Electric Standing Desk:

• 5 жылдык камтуу: Үстөлдүн рамкасы жана мотор.
• 2 жылдык камтуу: Башкаруу панели жана электроника.

For any assistance, questions, or warranty claims, please contact FLEXISPOT customer support through their official webпродукт сатылып алынган сайт же сатуучу.