Introduction
The Phanteks Eclipse G360A is a high-performance mid-tower gaming chassis designed for optimal airflow and component compatibility. It features an ultra-fine performance mesh front panel for superior cooling and dust filtration, integrated Digital-RGB lighting, and extensive support for modern gaming hardware including large GPUs and advanced liquid cooling solutions. This manual provides detailed instructions for setting up, operating, and maintaining your Eclipse G360A chassis.
Орнотуу жана орнотуу
1. Кутудан чыгаруу жана мазмуну
Carefully remove the chassis from its packaging. Verify that all components and accessories are present. The package should include the Eclipse G360A chassis, pre-installed 120mm D-RGB fans, and an accessory box containing screws, zip ties, and the user manual.
2. Компоненттин шайкештиги
- Motherboard колдоо: ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide).
- GPU узундугу: Up to 400 mm (15.7 in).
- CPU муздаткычтын бийиктиги: Up to 162 mm (6.3 in).
- Электр менен камсыздоо бөлүмүнүн узундугу: Up to 220 mm (280 mm depending on HDD cage location).
- Сактагыч: 2x 3.5" internal (included), 3x 2.5" internal (2 included).
1-сүрөт: Ички view highlighting 400mm GPU clearance, supporting high-end graphics cards.
Figure 2: Multiple storage options for 2.5" and 3.5" drives, with flexible mounting points.
3. Орнотуу кадамдары
- Шассиди даярдаңыз: Remove the tempered glass side panel by unscrewing the thumb screws. The front panel can be detached for easier fan/radiator installation.
Figure 3: Detachable front panel and fan bracket for simplified installation.
- Motherboard орнотуу: Secure your motherboard to the standoffs using the provided screws.
- Сактагыч дисктерди орнотуу: Mount 2.5" SSDs to the dedicated locations behind the motherboard tray or on the PSU shroud. Install 3.5" HDDs into the drive cages located under the PSU shroud.
- Кубат менен камсыздоо блогун (PSU) орнотуу: Slide the PSU into its designated compartment at the bottom rear of the chassis and secure it with screws.
- Графикалык картаны (GPU) орнотуу: Insert your graphics card into the PCIe slot on the motherboard. The chassis supports vertical GPU mounting with an optional bracket (PH-VGPUKT4.0_03).
- Муздатуу компоненттерин орнотуу: The G360A supports various fan and radiator configurations.
- Күйөрмандардын колдоосу: Front: 3x 120mm (3 pre-installed) or 2x 140mm; Top: 3x 120mm or 2x 140mm; Rear: 1x 120mm.
- Радиатор колдоо: Front: Up to 360mm or 280mm; Top: Up to 360mm; Rear: 120mm. Note: Front and top 360mm radiators cannot be installed simultaneously.
Figure 4: Detailed fan and radiator placement options for optimal cooling.
- Кабелдик башкаруу: Utilize the 36mm (1.4 in) cable management space behind the motherboard tray to route and secure cables for a clean build and improved airflow.
Иштөө нускамалары
1. Front I/O Panel Functions
The front I/O panel provides convenient access to essential controls and ports:
- Кубат баскычы: Системаны күйгүзөт же өчүрөт.
- 2 USB 3.0 порттору: USB түзмөктөрүн туташтыруу үчүн.
- Microphone/Headphone Combo Jack: Аудио киргизүү жана чыгаруу үчүн.
- D-RGB Mode Button: Cycles through pre-programmed lighting effects.
- D-RGB Color Button: Changes the color of the D-RGB lighting.
Figure 5: Front I/O panel with easy-access controls for power, USB, audio, and D-RGB lighting.
2. Digital-RGB Lighting Control
The Eclipse G360A features integrated D-RGB lighting with pre-installed 120mm D-RGB fans and an LED strip along the tempered glass panel. The lighting can be controlled in two ways:
- Кол менен башкаруу: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through various effects and colors without software.
- Энелик платаны синхрондоштуруу: The D-RGB controller can be connected to a compatible motherboard's D-RGB header (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, Razer Chroma). This allows for software control and synchronization with other D-RGB components in your system. Refer to your motherboard manual for D-RGB header location and software instructions.
Figure 6: Integrated D-RGB lighting and compatibility with major motherboard synchronization software.
Техникалык тейлөө
1. Cleaning the Ultra-fine Performance Mesh
The front panel's ultra-fine mesh acts as a dust filter. To maintain optimal airflow and prevent dust buildup, regularly clean the mesh:
- Gently detach the front panel.
- Use a soft brush or compressed air to remove accumulated dust from the mesh.
- Wipe the mesh with a slightly damp зарыл болсо, кездемени сүртүңүз, кайра орнотуудан мурун толугу менен кургак экенин текшериңиз.
Figure 7: The ultra-fine performance mesh design, crucial for airflow and dust filtration.
2. General Chassis Cleaning
For general cleaning of the chassis exterior and interior:
- Системанын өчүрүлгөнүн жана розеткадан ажыратылганын текшериңиз.
- Use a microfiber cloth to wipe down exterior surfaces.
- For interior dust, use compressed air to blow dust out of components and the chassis.
- Чыңалган айнек панелди айнек тазалагыч жана жумшак чүпүрөк менен тазалаңыз.
Проблемаларды чечүү
Жалпы маселелер жана чечимдер
| Маселе | Мүмкүн себеп | Чечим |
|---|---|---|
| Система күйбөйт. | Loose power connections, faulty PSU, incorrect front panel header connection. | Check all power cables (24-pin, 8-pin CPU, GPU). Verify front panel power switch connection to motherboard. Test PSU if possible. |
| D-RGB lighting not working or incorrect. | Loose D-RGB cable connection, incorrect D-RGB header, software conflict. | Ensure D-RGB cables are securely connected. If using motherboard sync, verify connection to a 3-pin 5V D-RGB header (not 4-pin 12V RGB). Try manual control via case buttons. Reinstall or update motherboard RGB software. |
| Начар аба агымы же жогорку температура. | Dust buildup, incorrect fan orientation, obstructed airflow. | Clean front mesh and other dust filters. Ensure fans are oriented correctly (intake/exhaust). Check for cable obstructions inside the case. |
| Front USB ports not functioning. | Loose USB 3.0 header cable connection to motherboard. | Verify the USB 3.0 cable from the front panel is securely connected to the motherboard's USB 3.0 header. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | Eclipse G360A |
| Модель номери | PH-EC360ATG_DBK02 |
| Форма фактору | Ара Tower |
| Өлчөмдөрү (WxDxH) | 455 x 200 x 465 мм / 17.9 x 7.87 x 18.3 дюйм |
| Материал(дар) | Steel Chassis, Tempered Glass |
| Motherboard Support | ATX, micro-ATX, mini-ITX, E-ATX (up to 280mm wide) |
| Front I/O | 2x USB 3.0, Microphone/Headphone Combo, Power Button, D-RGB Mode, D-RGB Color |
| Кеңейтүү уячалары | 7 |
| Ички 3.5 дюймдук айдоо орундары | 2 (2x included) |
| Ички 2.5 дюймдук айдоо орундары | 3 (2x included) |
| Алдын ала орнотулган күйөрмандар | 3x 120mm D-RGB (Front) |
| Fan Support (120mm) | Front: 3x; Top: 3x; Rear: 1x |
| Fan Support (140mm) | Front: 2x; Top: 2x |
| Radiator Support (120mm) | Алдыңкы: 360 мм чейин; Үстү: 360 мм чейин; Арткы: 120 мм |
| Radiator Support (140mm) | Front: Up to 280mm; Top: Up to 360mm |
| Максималдуу GPU узундугу | 400 мм / 15.7 дюйм |
| CPU муздаткычтын максималдуу бийиктиги | 162 мм / 6.3 дюйм |
| Кабель башкаруу мейкиндиги | 36 мм / 1.4 дюйм |
| Максималдуу PSU узундугу | 220 mm / 280 mm (depends on HDD Cage location) |
Кепилдик жана колдоо
Кепилдик маалымат
Phanteks products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Phanteks webсайт. Кепилдик, адатта, нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.
Кардарларды колдоо
Should you encounter any issues or have questions regarding your Phanteks Eclipse G360A chassis, please contact Phanteks customer support. You can find contact information, FAQs, and additional resources on the official Phanteks webсайт:
