1. Киришүү
This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your SUNLU T3 3D Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
Image: The SUNLU T3 3D Printer, showcasinанын дизайны жанаampбасып чыгаруу.
2. Коопсуздук нускамалары
Ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Принтерди тез күйүүчү материалдардан жана жылуулук булактарынан алыс кармаңыз.
- Иш учурунда туура желдетүүнү камсыз кылыңыз.
- Do not touch the hot nozzle or heated bed during operation or immediately after printing.
- Always disconnect power before performing maintenance or cleaning.
- Балдар жана үй жаныбарлары жетпеген жерде сактаңыз.
- Кубат менен камсыздоону текшериңизtage switch is set correctly for your region (115V or 230V) before plugging in the device. This switch is typically located near the power input.
3. Орнотуу жана чогултуу
3.1 Таңгактан чыгаруу жана текшерүү
Carefully remove all components from the packaging. Inspect for any visible damage during transit. Refer to the packing list to ensure all parts are present.
Image: A visual representation of the SUNLU T3 3D Printer's packing list, including the main unit, accessories, and tools.
3.2 Чогултуу кадамдары
The SUNLU T3 3D Printer is designed for easy assembly, typically completed in three main steps:
- Attach the gantry to the base.
- Mount the power supply unit/control box.
- Филамент спулунун кармагычын орнотуңуз.
Бардык туташуулардын коопсуз экенин жана кабелдер туура жолго коюлганын текшериңиз.
Сүрөт: жарылган view illustrating the simple three-step assembly of the printer.
3.3 Баштапкы деңгээлдөө
The T3 printer features 16-point automatic leveling. This function assists in achieving an even print surface. It is recommended to perform auto-leveling before your first print and periodically thereafter.
Image: The 16-point auto-leveling system in action, ensuring a precise print surface.
4. Иштөө нускамалары
4.1 Filament Loading
Insert the filament into the extruder mechanism. The T3 features a double gear metal extruder for stable filament output. Ensure the filament feeds smoothly without kinks.
Image: The metal double gear extruder, designed for consistent filament feeding.
4.2 Басып чыгаруу процесси
3D моделиңизди жүктөңүз file onto the printer via the provided TF card. Select the desired file from the printer's interface. The T3 supports high-speed printing up to 250mm/s, significantly reducing print times.
Image: A visual comparison demonstrating the speed advantage of 250mm/s printing.
4.3 Smart өзгөчөлүктөрү
- Filament Clog Detection: The printer will suspend operation and return to the origin if a clog is detected. Users can then clear the clog and resume printing.
- Filament Break Detection: The T3 detects abnormal filament feeding, such as run-out or breakage, and pauses printing to prevent print failure.
- Power Off Resume Printing: Куч болгон учурда уtage, the printer's memory function allows it to resume printing from where it left off once power is restored.
- Magnetic Build Plate: The flexible magnetic build surface allows for easy removal of finished 3D models without deformation. It also features ultra-fast heating.
Image: Flowchart demonstrating how the printer detects and handles filament clogs.
Image: Visual explanation of the power-off resume and filament outage detection features.
Image: Layers of the magnetic build plate, highlighting its flexibility and adhesion properties.
5. Техникалык тейлөө
5.1 Ременин чыңалуусун жөндөө
Over time, belts may loosen, affecting print accuracy and potentially causing noise. The T3 features X-axis and Y-axis belt adjusters to maintain proper tension and printing accuracy.
Image: Instructions for adjusting the X-axis and Y-axis belts to ensure optimal tension.
5.2 Жалпы тазалоо
Regularly clean the print bed, nozzle, and other accessible parts to prevent debris buildup. Use appropriate tools and cleaning solutions as recommended by the manufacturer.
5.3 Hot End Maintenance
Periodically inspect the hot end assembly. Ensure all components are securely fastened and free from filament residue. If necessary, carefully disassemble and reassemble the hot end, ensuring proper seating of all parts.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| No power upon startup | Туура эмес томtage switch setting, loose power connections, internal wiring issue. | Кубат менен камсыздоону текшериңизtage switch (115V/230V) is correctly set. Check all power cable connections. If issues persist, contact support. |
| Filament not extruding / Clogging | Nozzle clog, tangled filament, incorrect temperature. | Utilize the printer's clog detection feature to pause and clear the nozzle. Ensure filament is untangled and loaded correctly. Verify print temperature settings. |
| Prints not adhering to bed | Uneven bed, dirty print surface, incorrect bed temperature, first layer height issues. | Perform auto-leveling. Clean the magnetic build plate. Adjust bed temperature according to filament type. Calibrate first layer height. |
| Visible ringing or ghosting on prints | Loose belts, excessive print speed/acceleration, unstable printer placement. | Adjust belt tension using the X-axis and Y-axis adjusters. Reduce print speed and acceleration settings in your slicer. Ensure the printer is on a stable surface. |
| Filament run-out or breakage during print | Empty spool, brittle filament, excessive tension. | The printer will pause automatically. Replace the filament and resume printing. Store filament properly to prevent brittleness. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | SUNLU T3 (Terminator 3) |
| Басма технологиясы | FDM (Fused Deposition Modeling) |
| Басып чыгаруу өлчөмү | 220 x 220 x 250 мм (8.66 x 8.66 x 9.84 дюйм) |
| Максималдуу басып чыгаруу ылдамдыгы | 250 мм/с |
| Продукциянын өлчөмдөрү | 17.32 x 15.75 x 18.5 дюйм |
| Элемент Салмагы | 15.98 фунт (болжол менен 7.25 кг) |
| Материал | Алюминий (рамка) |
| Түс | T3 Кара |
| Motherboard | 32-bit silent motherboard |
| Ызы-чуу деңгээли | Lower than 45dB (Full Silent Printing) |
| Тегиздөө | 16-point 3D Touch Auto Leveling |
| Экструдер | Double Gear Metal Extruder |
| Build Surface | Алынуучу магниттик платформа |
| Режимде электр кубатын керектөө | 360 ватт |
Image: The physical dimensions of the SUNLU T3 3D Printer.
8. Кепилдик маалыматы
Specific warranty details are not provided in the available product information. Please refer to the official SUNLU website or contact SUNLU customer service for comprehensive warranty terms and conditions.
9. Кардарларды колдоо кызматы
For further assistance, technical support, or inquiries, please visit the official SUNLU store or contact their customer service department.
