Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Usogood TC30 Trail Camera. Please read this manual thoroughly before using the camera to ensure proper function and longevity of the device.
Фронт view of the Usogood TC30 Trail Camera, showcasinанын камуфляж дизайны жана линзалар массиви.
Пакеттин мазмуну
Пакетиңизде бардык буюмдар бар экенин текшериңиз:
- Из камерасы x 1
- Орнотуу кур x 1
- Колдонмо колдонмо x 1
- USB кабели x 1
Продукт спецификациялары
| Өзгөчөлүк | Спецификация |
|---|---|
| Модель аты | TC30 (1080P) |
| Video Resolution | 1080P HD |
| Сүрөттүн резолюциясы | 24 мегапиксел |
| Түнкү көрүнүш | 36pcs 850nm IR LEDs, up to 65ft range |
| Motion Detection | 3 PIRs, 120° wide angle, 65ft detection range |
| Триггер ылдамдыгы | 0.3 секунд |
| Суу өткөрбөйт рейтинги | IP66 |
| Сактагыч | Supports up to 32GB standard memory card |
| Power Source | 8 AA batteries (not included) or 6V external power |
| Күтүү убактысы | 8 айга чейин |
| Иштөө температурасы | -10°Cден 40°Cге чейин |
Орнотуу колдонмосу
1. Батареяны орнотуу
The TC30 Trail Camera requires 8 AA batteries for operation. Ensure correct polarity when inserting batteries.
- Камераны ачыңыз casing каптал клипсаларды чечүү менен.
- Батарея бөлүкчөсүн табыңыз.
- Insert 8 AA batteries, observing the positive (+) and negative (-) indicators.
- Батарея отсегин бекем жабыңыз.
Illustration showing the correct insertion of AA batteries into the camera's battery compartment.
2. Эстутум картасын киргизүү
A standard SD card (up to 32GB) is required to store photos and videos.
- Камера ачык турганда, SD карта уячасын табыңыз.
- Форматталган SD картаны ордуна чыкылдаганча уячага салыңыз. Карта туура багытта салынганын текшериңиз.
- Чыгаруу үчүн картаны сыртка чыкканга чейин акырын түртүңүз.
3. Камераны орнотуу
The camera can be mounted using the included mounting belt or screw-in method.
- Belt Mount: Thread the mounting belt through the slots on the back of the camera. Secure the camera to a tree or pole at the desired height and angle.
- Screw-In Mount: Use a compatible screw mount (not included) to attach the camera to a wall or other flat surface.
The Usogood TC30 Trail Camera securely mounted to a tree using the provided strap, demonstrating its camouflage design blending with the environment.
Иштөө нускамалары
1. Күйгүзүү / Өчүрүү
To power on the camera, slide the mode switch from OFF to ON or TEST. To power off, slide the switch to OFF.
2. Режимди тандоо
Камеранын үч иштөө режими бар:
- ӨЧҮК: Камера өчүк.
- КҮЙҮК: Camera is in active monitoring mode. It will capture photos/videos based on motion detection and configured settings. The screen will turn off after a few seconds to conserve power.
- СЫНОО: мүмкүндүк берет view the camera's settings, playback captured media, and manually trigger the camera. The screen remains active in this mode.
3. Basic Settings (in TEST mode)
Navigate the menu using the control buttons to adjust settings such as:
- Режим: Сүрөт, Видео же Сүрөт+Видео тандаңыз.
- Сүрөттүн өлчөмү: Set photo resolution (e.g., 24MP).
- Видео өлчөмү: Set video resolution (e.g., 1080P).
- PIR аралыгы: Аныктоолордун ортосундагы убакыт кечигүүсү.
- Сезимталдуулук: Adjust PIR sensor sensitivity.
- Time Stamp: Enable/disable date and time overlay on media.
- Убакыттын өтүшү: Configure time-lapse capture (if desired).
- Цикл жаздыруу: Enable auto overwrite when memory card is full.
Visual comparison demonstrating the enhanced detail captured by the 24MP resolution setting of the Usogood TC30 Trail Camera compared to 16MP.
An image illustrating the clear night vision provided by the Usogood TC30 Trail Camera, highlighting the effectiveness of its 850nm infrared LEDs in low-light conditions.
This image demonstrates the Usogood TC30 Trail Camera's rapid 0.3-second trigger speed, capable of capturing fast-moving subjects like a leopard in mid-air.
An illustration of the time-lapse function of the Usogood TC30 Trail Camera, showing sequential images of a plant growing over 7, 14, and 30 days, useful for observing gradual changes.
This image depicts the automatic overwrite function of the Usogood TC30 Trail Camera, where older files are replaced by new ones when the SD card reaches full capacity, ensuring continuous recording.
4. Viewing Media
In TEST mode, you can review captured photos and videos directly on the camera's screen or by connecting the camera to a computer using the provided USB cable.
- Камерада: Use the navigation buttons to browse through files.
- USB аркылуу: Connect the camera to your computer. The camera will appear as a removable disk. You can then access the files.
- SD картаны окугуч: Remove the SD card and insert it into a compatible card reader connected to your computer.
Техникалык тейлөө
- Тазалоо: Камера линзасын жана корпусун тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
- Батареяны алмаштыруу: Replace all 8 AA batteries when the low battery indicator appears. Do not mix old and new batteries or different battery types.
- SD Card башкаруу: Regularly format your SD card to maintain optimal performance and prevent data corruption. Back up important files форматтоодон мурун.
- Сактагыч: Камераны көпкө чейин колдонбогондо, батареяларды алып чыгып, салкын, кургак жерде сактаңыз.
The Usogood TC30 Trail Camera is shown operating reliably in challenging weather, including snow and sandstorm conditions, demonstrating its IP66 waterproof rating and robust design.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Камера күйбөйт. | Low or dead batteries; incorrect battery polarity; faulty batteries. | Replace all 8 AA batteries with new ones, ensuring correct polarity. Test with a 6V external power source if available. |
| Сүрөттөр/видеолор тартылган жок. | SD card full or not inserted correctly; incorrect mode (e.g., in TEST mode); PIR sensitivity too low; camera not detecting motion. | Check SD card, format if necessary. Ensure camera is in ON mode. Adjust PIR sensitivity. Verify camera placement for optimal motion detection. |
| Poor night vision images. | Obstruction in front of IR LEDs; subject too far; low battery. | Clear any obstructions. Ensure subject is within 65ft range. Replace batteries. |
| Camera continuously records. | PIR sensitivity too high; camera facing moving objects (branches, water). | Reduce PIR sensitivity. Reposition camera to avoid false triggers. |
| Күн/Убакыт стamp туура эмес. | Date/Time not set or reset after battery change. | Enter TEST mode and set the correct date and time in the camera settings. |
Кепилдик жана колдоо
Usogood offers a 2-year protection plan for repair services and a 3-month return policy for quality assurance. We are committed to continuously updating and optimizing our products and services based on customer feedback.
For technical support or warranty claims, please contact Usogood customer service. Refer to the contact information provided with your purchase or visit the official Usogood webсайт.
- 2 Years Protection: Repair services provided within 2 years of purchase.
- 3-Month Return: Hassle-free returns within 3 months for product quality issues.
