ECOELER шыптын кыймыл сенсорун өчүргүчтүн колдонуучу колдонмосу

1. Киришүү

The ECOELER Ceiling Occupancy Motion Sensor Switch (Model YM2511) is an advanced automatic light switch designed to enhance energy efficiency and convenience in various indoor environments. It utilizes Passive Infrared (PIR) technology to detect motion, automatically turning lights ON when occupancy is detected and OFF after a set period of inactivity. This sensor is ideal for applications such as hallways, bathrooms, storage areas, closets, and pantries, providing hands-free lighting control.

Фронт view of the ECOELER Ceiling Occupancy Motion Sensor Switch.

2. Кутуда эмне бар

Your ECOELER Motion Sensor Switch package includes the following components:

• Motion Sensor Unit
• Mounting Accessories (screws, wire nuts)
• Колдонуучунун Колдонмосу (бул документ)

3. Техникалык шарттар

Dimensional drawing showing the physical measurements of the sensor.

The sensor is compatible with various lamp types, including Incandescent, CFL, and LED.

4. Орнотуу жана орнотуу

Маанилүү коопсуздук маалыматы: Installation should be performed by a qualified electrician or in accordance with local electrical codes. Always ensure the power is OFF at the circuit breaker before beginning any electrical work to prevent electric shock.

Зымдарга талаптар:

• The ECOELER YM2511 sensor requires a neutral wire for proper operation.
• Ensure all wiring connections are secure and insulated.

Орнотуу кадамдары (Жалпы колдонмо):

1. Кубатты өчүрүү: Жарык бергичти башкарып турган автоматтык өчүргүчтү таап, электр кубатын өчүрүңүз. Үн өлчөгүчтү колдонуп, электр кубаты өчүк экенин текшериңиз.tage сыноочу.
2. Зымдарды даярдоо: Identify the Line (hot), Load (to light fixture), and Neutral wires from your electrical box. The sensor has corresponding wires (typically black for Line, red for Load, white for Neutral).
3. Зымдарды туташтыруу: Use the provided wire nuts to connect the sensor's wires to the corresponding house wires. Connect ground wires if present.
4. Тоо сенсору: Securely mount the sensor to the ceiling fixture or junction box using the provided mounting accessories. Ensure it is positioned for optimal 360° detection.
5. Күчтү калыбына келтирүү: Once all connections are secure and the sensor is mounted, turn the power back on at the circuit breaker.

5. Иштөө нускамалары

The ECOELER motion sensor switch features three adjustable dials to customize its performance according to your specific needs. These dials are located on the sensor unit.

The adjustment dials for Time, Sense, and Light settings.

Жөнгө салынуучу Орнотуулар:

1. TIME (Кечигүү убактысы):
   This dial controls how long the light remains ON after the last detected motion. You can adjust the delay time from 15 seconds to 30 minutes. Turning the dial clockwise increases the delay time.
2. SENSE (Sensitivity):
   This dial adjusts the sensitivity of the motion detection. It can be set from 20% to 100%. A higher sensitivity setting will detect smaller movements or motion at a greater distance. Adjust this to avoid unwanted detection from minor movements or distant traffic.
3. LIGHT (Ambient Light Level):
   This dial sets the ambient light level threshold. The sensor will only activate the lights if the surrounding ambient light is below this set level. This prevents the lights from turning on unnecessarily during daylight hours when sufficient natural light is available.

Diagram illustrating the 360° PIR detection range and pattern.

The sensor is suitable for a wide range of applications, including warehouses, corridors, parking lots, stairwells, porches, and closets.

6. Техникалык тейлөө

The ECOELER motion sensor switch requires minimal maintenance. To ensure optimal performance and longevity:

• Тазалоо: Periodically wipe the sensor lens with a soft, dry cloth to remove dust or debris. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the sensor.
• Текшерүү: Occasionally inspect the wiring connections to ensure they remain secure.

7. Кыйынчылыктарды

If you encounter issues with your ECOELER motion sensor switch, refer to the following common troubleshooting steps:

• Light not turning ON when motion is detected:
  • Ensure power is supplied to the sensor.
  • Check the 'LIGHT' setting; it might be set too high, preventing activation in current ambient light conditions. Try lowering the setting.
  • Verify that motion is occurring within the sensor's detection range and line of sight.
  • Clean the sensor lens to ensure no obstructions.
• Light not turning OFF:
  • Check the 'TIME' setting; it might be set to a very long delay.
  • Ensure there is no continuous motion within the sensor's detection area. Even subtle movements can keep the light on.
  • Verify that the sensor is not exposed to heat sources (e.g., HVAC vents) or air drafts that could cause false triggers.
• False Triggers (light turns on without apparent motion):
  • Adjust the 'SENSE' setting to a lower sensitivity.
  • Ensure the sensor is not positioned where it can detect motion outside the desired area (e.g., through a doorway to an adjacent room).
  • Check for environmental factors like strong air currents or rapid temperature changes near the sensor.

If the problem persists after attempting these steps, it is recommended to consult a qualified electrician or contact ECOELER customer support.

8. Кепилдик жана колдоо

ECOELER is committed to providing high-quality products. For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official ECOELER website. For technical assistance, troubleshooting beyond this manual, or any other inquiries, please contact ECOELER customer service through the retailer where the product was purchased or directly via the contact information provided on the ECOELER webсайт.

We appreciate your purchase of the ECOELER Ceiling Occupancy Motion Sensor Switch and hope it brings convenience and energy savings to your space.