1. Киришүү
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Продукт бүтүп калдыview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Түнкү көрүнүш: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Кең талаа View: 120° wide-angle lens for comprehensive monitoring.
- Туруктуу дизайн: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Кыймыл жандырылды: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Орнотуу
- Батареяны орнотуу: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- SD картаны салыңыз: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Күйгүзүү: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Камераны орнотуу:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Иштөө нускамалары
4.1. Режимди тандоо
The camera has three main modes:
- ӨЧҮК: Камераны өчүрүңүз.
- СЫНОО: мүмкүндүк берет view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- КҮЙҮК: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Орнотуу | Description | Сунушталган маани |
|---|---|---|
| Mode | Сүрөт, Видео же Сүрөт+Видео тандаңыз. | Фото+Видео |
| Сүрөттүн резолюциясы | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32MP |
| Video Resolution | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| PIR сезгичтиги | Кыймыл сенсорунун сезгичтигин тууралаңыз (Жогорку, Орточо, Төмөн). | Орто |
| Trigger мөөнөтү | Time delay between detections (e.g., 5s, 10s, 30s). | 10 секунд |
| Time Lapse | Capture images at set intervals regardless of motion. | Өчүк |
| Дата жана убакыт | Учурдагы күн менен убакытты коюңуз. | Учурдагы |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
4.6-сүрөт: Мисample of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Техникалык тейлөө
- Тазалоо: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Батареяны алмаштыруу: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- SD Card башкаруу: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Сактагыч: Камераны көпкө чейин колдонбогондо, батареяларды алып чыгып, салкын, кургак жерде сактаңыз.
6. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Камера күйбөй жатат | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Сүрөт/видео сапаты начар | Кир линза; жарык аз шарттар; чечилиш жөндөөлөрү туура эмес. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Camera not triggering | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| SD карта катасы | SD card full; incompatible SD card; corrupted SD card. | Жок кылуу files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Сүрөттүн резолюциясы | 32 МП чейин |
| Video Resolution | 4K чейин |
| Триггер ылдамдыгы | 0.1 секунд |
| Түнкү көрүү диапазону | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| PIR аныктоо диапазону | Day: 80ft (24m), Night: 65ft (20m) |
| талаасы View | 120° Wide Lens |
| Суу өткөрбөйт рейтинги | IP66 |
| Иштөө температурасы | -22°F – 158°F (-30°C – 70°C) |
| Сактагыч | SD Card (up to 256GB, Class 10 or higher) |
| Электр камсыздоо | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Дисплей | 2.4 дюймдук ЖК |
8. Кепилдик жана колдоо
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri webсайт.
Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз.
