Nolan N80-8 Ally мотоцикл туулгасын колдонуучунун колдонмосу

1. Киришүү

Welcome to the user manual for your Nolan N80-8 Ally Motorcycle Helmet. This manual provides essential information for the proper use, maintenance, and care of your helmet to ensure maximum safety and comfort. The Nolan N80-8 is an advanced full-face helmet designed with modern Italian aesthetics, superior ventilation, and a comfortable interior, incorporating innovative features for enhanced rider experience and protection.

Please read this manual thoroughly before using your helmet for the first time and keep it for future reference.

Сүрөт 1: Алдыңкы view of the Nolan N80-8 Ally Motorcycle Helmet in Flat Black/White. The helmet features a clear main visor, an internal dark sun visor, and a sleek, aerodynamic design with white and grey accents on a matte black shell.

2. Коопсуздук маалыматы

Your safety is paramount. Always ensure your helmet fits correctly and is securely fastened before every ride. This helmet meets stringent safety standards to provide optimal protection.

• Сертификаттар: The Nolan N80-8 helmet complies with US Federal Motor Vehicle Safety Standard 218 (FMVSS 218) (DOT FMVSS No. 218 Certified) and meets the new safety standard ECE 22-06, ensuring adherence to the latest safety regulations for maximum protection.
• Nolan Emergency Release System (NERS): For enhanced safety, the N80-8 is equipped with NERS, allowing for quick and easy removal of the cheek pads by emergency personnel in the event of an accident, facilitating safer helmet removal.
• Emergency Stop Signal (ESS) Prepared: The helmet is prepared for the optional ESS system, which can warn riders behind you by flashing the brake lights during emergency braking.
• Туура ылайыктуу: A helmet must fit snugly and comfortably. If the helmet moves freely on your head, it is too large. A helmet that is too loose may not provide adequate protection in a crash.
• ээк боосу: Always fasten the Microlock² ratchet closure chin strap securely. The strap should be tight enough so that you cannot pull the helmet off your head when the strap is fastened.
• Көз айнектин колдонулушу: Always ride with the main visor closed to protect your eyes from wind, debris, and insects. Use the internal sun visor for glare reduction as needed.

3. Өзгөчөлүктөрү

The Nolan N80-8 Ally helmet is engineered with a range of features designed for comfort, safety, and convenience:

• Поликарбонаттын кабыгы: Durable and lightweight shell construction.
• Ultrawide Lexan Visor: Provides an expansive field of vision with a scratch-resistant coating. Features a patent-pending visor mechanism with an elliptical opening curve for precise sealing.
• Pinlock® Inner Visor: Included for maximum viewing area and to prevent fogging. The innovative visor mechanism ensures the Pinlock® does not brush against the visor seal.
• VPS Sun Visor: Dark tinted, adjustable internal sun visor with UV 400 protection, scratch-resistant coating, and an automatic retraction mechanism for quick deployment and retraction.
• "Clima Comfort" Interior: Removable and washable interior lining with an innovative mesh structure, made from environmentally friendly materials, ensuring a comfortable fit.
• Liner Positioning Control (LPC) System: An easy-to-use adjustment strap allows for individual customization of the liner's height and thus the helmet's position on the wearer's head, optimizing fit.
• "Airbooster Technology": Advanced ventilation system for optimal airflow and rider comfort.
• Microlock² Ratchet Closure: Secure and easy-to-use retention system.
• Spectacle Wearer Friendly: Designed to accommodate riders who wear eyeglasses.
• N-Com Communication System Prepared: Ready for integration with N-Com communication systems (sold separately).

4. Орнотуу жана тууралоо

4.1 Initial Fit and Sizing

Before riding, ensure your helmet is the correct size and fits properly. A snug fit is crucial for safety. Refer to the size chart in the Specifications section to determine your size based on head circumference.

4.2 Liner Positioning Control (LPC) System

The LPC system allows you to fine-tune the helmet's position on your head. To adjust, locate the adjustment strap within the helmet's interior. Gently pull or release the strap to raise or lower the liner's height until you achieve a comfortable and secure fit that positions the helmet correctly on your head.

4.3 Chin Strap Adjustment (Microlock²)

1. Insert the notched strap into the Microlock² buckle until you hear clicks, indicating it is securely fastened.
2. Pull the strap to ensure it is snug under your chin. It should be tight enough that the helmet cannot be rolled off your head, but not uncomfortably restrictive.
3. To release, lift the red lever on the buckle and pull the notched strap out.

5. Иштетүү жана колдонуу

5.1 Main Visor Operation

The Ultrawide Lexan visor can be opened and closed using the tab located at the bottom center of the visor. The elliptical opening mechanism ensures a precise seal when closed. To open, gently lift the tab. To close, push the visor down until it clicks into place.

5.2 VPS Sun Visor Operation

The internal VPS sun visor is operated by a slider located on the left side of the helmet. Slide it down to deploy the sun visor for glare reduction. Slide it up to retract the sun visor. The automatic retraction mechanism ensures it snaps back into place when fully retracted.

5.3 Ventilation System (Airbooster Technology)

The Nolan N80-8 features "Airbooster Technology" for optimal ventilation. Locate the adjustable vents on the chin bar and top of the helmet. Open these vents to allow airflow and close them to reduce airflow, adjusting according to weather conditions and personal preference.

6. Техникалык тейлөө жана кам көрүү

6.1 Туулга кабыгын тазалоо

Clean the helmet shell with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the helmet's finish and materials. Rinse thoroughly and dry with a soft, clean cloth.

6.2 Visor and Pinlock® Care

• Негизги визор: Clean the main visor with a soft, damp cloth and mild soap. Do not use abrasive materials. For stubborn dirt, soak a cloth in warm water and place it over the visor to soften the grime before gently wiping.
• Pinlock® Inner Visor: The Pinlock® insert should only be cleaned with a soft, damp cloth. Do not rub vigorously or use chemical cleaners, as this can damage its anti-fog properties. Handle the Pinlock® by its edges to avoid touching the inner surface.
• VPS Sun Visor: жумшак менен тазалоо, гamp кездеме. Катуу химиялык заттардан алыс болуңуз.

6.3 Removable Interior Cleaning

The "Clima Comfort" interior is removable and washable. Carefully detach the interior padding according to the instructions provided in the helmet's packaging (if available, otherwise gently unclip). Hand wash with mild soap and lukewarm water. Rinse thoroughly and allow to air dry completely before reinserting into the helmet. Do not machine wash or tumble dry.

6.4 Сактоо

Store your helmet in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it near chemicals or solvents that could damage the shell or interior components.

7. Кыйынчылыктарды

• Көз айнекти тумандатуу: Ensure the Pinlock® inner visor is correctly installed and clean. If fogging persists, check the helmet's ventilation settings and ensure adequate airflow.
• Helmet Feels Loose/Tight: Re-evaluate your helmet size using the size chart. For minor adjustments, utilize the Liner Positioning Control (LPC) system to optimize the fit. If the helmet is still uncomfortable or too loose, it may be the wrong size.
• Chin Strap Issues: Ensure the Microlock² ratchet closure is clean and free of debris. If it does not fasten securely, inspect for damage. Do not use a damaged chin strap.
• Адаттан тыш үндөр/титирөөлөр: Check that all vents are properly closed or opened as intended. Ensure the main visor is fully closed and sealed. Inspect for any loose components.

For issues not covered here or if problems persist, please contact authorized Nolan service centers or your retailer for assistance.

8. Техникалык шарттар

8.1 Helmet Sizing Chart

Figure 2: Nolan Helmet Size Chart. This table displays various Nolan helmet models and their corresponding sizes (XXS to 3XL) based on head circumference in centimeters (54cm to 65cm). The N80-8 model is listed, indicating available sizes from XXS to 3XL.

9. Кепилдик жана колдоо

Nolan helmets are manufactured to high-quality standards. For specific warranty information regarding your Nolan N80-8 Ally helmet, please refer to the warranty card included with your purchase or visit the official Nolan Helmets webсайт. Кепилдик шарттары, адатта, өндүрүш кемчиликтерин камтыйт.

For technical support, spare parts, or service inquiries, please contact your authorized Nolan dealer or the retailer from whom you purchased the helmet. Ensure you have your purchase receipt and helmet model information ready when contacting support.