Bissell CrossWave C3 Pro Multi-Surface Wet Dry Vacuum Cleaner

Маанилүү коопсуздук нускамалары

Read all instructions before using your appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Ар дайым туура негизделген розеткага туташтырыңыз.
• Колдонбогондо жана тазалоодон же тейлөөдөн мурун розеткадан сууруп алыңыз.
• Сууга же суюктукка батырбаңыз.
• Use only BISSELL cleaning products intended for this appliance.
• Чачты, кенен кийимдерди, манжаларды жана дененин бардык бөлүктөрүн тешиктерден жана кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Бузулган шнур же сайгыч менен колдонбоңуз.
• Сыртта же нымдуу беттерде колдонбоңуз.
• оюнчук катары колдонууга жол бербеңиз. Балдар тарабынан же алардын жанында колдонулганда кылдат көңүл буруу зарыл.

Продукт бүттүview

The Bissell CrossWave C3 Pro is engineered for efficient multi-surface cleaning, combining vacuuming, washing, and drying capabilities into one device. Key features include:

• Two-Tank Technology: Separates clean water/formula (0.82 L) from dirty water (0.62 L) for continuous cleaning with fresh solution.
• Көп кырдуу тазалоо: Suitable for tiles, sealed wood floors, laminates, and rugs.
• Автоматтык өзүн өзү тазалоо: Rinses the brush roll and internal components after each use.
• FreshStart Odor Management System: Includes an antibacterial filter, brush roll, and FreshStart cleaning solution to prevent odors.
• Иштетүү: Ensures consistent power without battery limitations.

The CrossWave C3 Pro vacuums, washes, and dries in a single pass.

Орнотуу жана чогултуу

1. Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging. Ensure all components listed in the user guide are present.
2. Тутканы чогултуу: Insert the upper handle into the main body of the unit until it clicks securely into place.
3. Таза суу резервуарын толтуруу:
   • Машинанын арткы жагынан таза суу куюлган бакты алып салыңыз.
   • Unscrew the cap and fill with warm tap water up to the 'Water' fill line.
   • Add the appropriate BISSELL cleaning formula up to the 'Formula' fill line. Do not overfill.
   • Securely replace the cap and reinsert the tank into the machine.
   

   Filling the clean water tank with water and cleaning solution.

4. Check Dirty Water Tank: Ensure the dirty water tank is empty and properly seated before use.

Иштөө нускамалары

Баштоодон мурун

• Remove any loose debris or large objects from the floor before operating.
• Таза суу куюлган бактын толтурулганын жана кир суу куюлган бактын бош экенин текшериңиз.
• Электр шнурун жерге туташтырыңыз.

Катуу полдорду тазалоо

1. Turn on the machine by pressing the power button. Select the 'Hard Floor' mode.
2. Hold the solution spray trigger to dispense water and cleaning solution as you push the machine forward.
3. Release the trigger as you pull the machine back to allow the brush roll to clean and the vacuum to suction up the dirty water.
4. Repeat passes as needed until the floor is clean. For heavily soiled areas, hold the trigger for longer on the forward pass.
5. For best drying results, make several dry passes (without holding the trigger) over the cleaned area.

The CrossWave C3 Pro effectively cleans spills and dirt from hard floors.

Килемдерди тазалоо

1. Select the 'Area Rug' mode.
2. Make a forward and backward pass while holding the spray trigger.
3. Release the trigger and make a forward and backward pass to dry the rug.
4. Avoid over-wetting the rug. Do not make more than two wet passes.

Multi-surface cleaning on a rug.

Two-Tank System

The innovative two-tank system ensures that clean water and cleaning solution are always separate from the dirty water collected from your floors. This guarantees that you are always cleaning with a fresh solution.

Separate tanks for clean and dirty water.

Техникалык тейлөө

Automatic Self-Cleaning Cycle

After each use, perform the automatic self-cleaning cycle to rinse the brush roll and internal components:

1. Place the machine on its storage tray.
2. Ensure the dirty water tank is empty and the clean water tank has at least 200ml of water.
3. Press and hold the self-clean button for 10-15 seconds. The cycle will run, cleaning the brush roll and flushing the system.
4. Цикл аяктагандан кийин кир суу куюлган бакты бошотуңуз.

Using FreshStart solution during the self-cleaning cycle helps prevent odors.

Cleaning the Brush Roll and Filter

• Brush Roll: Remove the brush roll cover and then the brush roll. Rinse it under running water and allow it to air dry completely before reinserting.
• Чыпка: Remove the filter from the dirty water tank. Rinse it under running water. Ensure it is completely dry before reinserting to maintain suction power. Replace the filter every 6 months or as needed.

Ensure the filter and brush roll are clean and dry for optimal performance.

Odor Management System

The FreshStart Odor Management System helps keep your CrossWave clean and fresh. Regularly use the FreshStart cleaning solution and ensure the antibacterial filter and brush roll are clean and dry after each use to prevent odor buildup.

Use BISSELL Natural Multi-Surface Floor Cleaning Solution for effective and natural cleaning.

Проблемаларды чечүү

Follow these steps to minimize streaks and ensure effective cleaning.

Техникалык шарттар

• Бренд: Бисселл
• Модел: 3555N
• Түсү: Black/Titanium/Blue
• Продукциянын өлчөмдөрү: 27 x 30 x 116.8 см
• Элемент Салмагы: 5 кг
• Ватtage: 560 ватт
• Материал: Пластик
• Ылдамдыктардын саны: 2
• Ызы-чуу деңгээли: 80 децибел
• Өзгөчөлүктөр: Washable filter, Wheels, Wet and dry cleaning, Bagless
• Чыпка түрү: Кездеме
• Сунушталган беттер: Tiles, Sealed wood floors, Laminates, Carpets
• Кубат булагы: Электр зымдары
• Таза суу резервуарынын сыйымдуулугу: 0.82 литр
• Кир суу резервуарынын сыйымдуулугу: 0.62 литр

Кепилдик жана колдоо

Кепилдик маалымат

For detailed warranty information, please refer to the warranty card included with your product or visit the official Bissell webсайт. Кепилдиктин шарттары жана шарттары аймакка жараша өзгөрүшү мүмкүн.

Кардарларды колдоо

If you encounter any issues or have questions regarding your Bissell CrossWave C3 Pro, please contact Bissell Customer Service. You can find contact information on the official Bissell webсайты же жергиликтүү сатуучу аркылуу.

For additional resources, including FAQs and video tutorials, please visit the official Bissell webсайт.