Introduction
This manual provides detailed instructions for the safe and effective use of your TOHETO Portable A4 Tracing LED Copy Board. Please read this manual thoroughly before operation and retain it for future reference.
Пакеттин мазмуну
- 1 x LED light drawing pad (Grey)
- 1 х көтөрүп Case
- 1 x 6 feet Type C cable (1.8m)
- 4 х магниттер
- 1 x Карандаш
- 1 x Карандаш учтуу
- 1 x Eraser
- 1 x User Manual
Негизги өзгөчөлүктөрү
Tilt-Angle & Stable Magnetic Design
The light drawing pad features an ergonomic tilt-angle designed to align with natural usage habits, reducing strain during prolonged use. It eliminates the need for external brackets. Four magnets are included to secure paper on the light board surface, ensuring stability during tracing.
Battery & Type C Powered
This LED light pad is equipped with a built-in battery, offering approximately 6 hours of operation after a 2-hour charge. It supports both battery mode and Type C charging. The upgraded Type C charging port provides a more stable connection.
5-Level Brightness & Side Button
The A4 light pad offers five adjustable brightness levels, allowing users to optimize lighting based on ambient conditions and paper thickness. The power button is strategically placed on the side to prevent accidental activation or deactivation.
Кеңири колдонмо
The light drawing board is suitable for various applications including drawing, tracking, sketching, animation, X-ray viewing, calligraphy, diamond painting, architectural design, sewing projects, fashion design, and industrial design.
Жайгашуу
Баштапкы заряддоо
Before first use, fully charge the light board using the provided Type C cable. Connect the Type C end of the cable to the light board's charging port and the USB-A end to a compatible USB power source (e.g., computer, laptop, USB adapter, power bank, car charger). A full charge takes approximately 2 hours.
Күйгүзүү/өчүрүү
Locate the power button on the side of the light board. Press the button to turn the device on. Press it again to turn it off.
Иштөө нускамалары
Жарыктыкты жөндөө
With the light board powered on, repeatedly press the side button to cycle through the 5 brightness levels. Select the level that best suits your tracing needs and ambient light conditions.
Securing Your Work
Place your original artwork or design on the surface of the light board. Place the paper you wish to trace onto over the original. Use the four included magnets to hold both sheets securely in place on the light board's surface.
Техникалык тейлөө
Тазалоо
To clean the surface of the light board, use a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface.
Сактагыч
When not in use, store the light board in its provided carry case to protect it from dust and scratches. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Батареяга кам көрүү
To prolong battery life, avoid fully discharging the battery frequently. Recharge the device when the brightness noticeably diminishes or when the battery indicator suggests low power. If storing for an extended period, charge the battery to about 50% every few months.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык тактасы күйбөйт | Батарея түгөндү | Connect the light board to a power source using the Type C cable and charge it. |
| Жарык тактасы күйбөйт | Cable connection is loose or incorrect | Ensure the Type C cable is securely connected to both the light board and the power source. Verify the power source is active. |
| Brightness is too low/high | Туура эмес жарыктык жөндөөсү | Press the side button repeatedly to cycle through the 5 brightness levels until the desired illumination is achieved. |
| Paper slips during tracing | Magnets not used or insufficient | Use all four provided magnets to firmly secure the paper to the light board surface. |
| Заряддоо жай же иштебей жатат | USB-C to USB-C cable used | Only USB-A to USB-C charging cable can be used. USB-C to USB-C charging cable is not compatible. |
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | A4 w/bag-Grey |
| Элемент моделинин номери | 02 |
| Түс | Боз |
| Материал | Magnetic A4 Gray with Bag |
| Продукциянын өлчөмдөрү | 13.4 x 9.8 x 0.7 дюйм |
| Элементтин калыңдыгы | 0.6 дюйм |
| Элемент Салмагы | 2.9 фунт (1.32 килограмм) |
| Power Source | Батарея менен иштейт |
| Жарык булагы түрү | Жарык чыгаруучу диод (LED) |
| Батарея | 1 Литий Полимердик батарейка (кошулган) |
| Өндүрүүчү | TOHETO |
| Сунушталган Колдонуулар | Diamond painting, 2D animation, Calligraphy, Sketching, Drawing, X-Ray Viewing, Improving children's drawing skills, Gift for various occasions |
Кепилдик жана колдоо
TOHETO provides a 100% satisfaction service. If you encounter any quality issues with your product, please contact TOHETO US directly for assistance. Replacement options are available for quality-related concerns.
For further support or inquiries, please refer to the contact information provided with your purchase or visit the official TOHETO store on Amazon:
