1. Киришүү
This manual provides essential information for the safe and effective use of the DROK DC-DC Boost Buck Converter, Model 200664. This device is designed to regulate voltage, converting an input DC voltage range of 9V-36V to a stable 12V DC output. Its robust aluminum shell and IP67 waterproofing make it suitable for various applications, including automotive, solar power systems, and industrial controls.
The converter features over-current and over-temperature protection, ensuring reliable performance. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.
Image 1: The DROK Boost Buck Converter, showcasing its aluminum shell and pre-wired input/output connections.
2. Техникалык шарттар
The following table details the technical specifications of the DROK Boost Buck Converter:
| Параметр | Нарк |
|---|---|
| Киргизүү көлөмүtage Диапазон | DC 9V ~ 36V |
| Output Voltage | DC 12V |
| Чыгуу ток (макс) | 3A |
| Чыгуу кубаттуулугу (Max) | 36 Вт |
| Конверсиянын эффективдүүлүгү | >90% |
| No Load Voltage Диапазон | Көлөмдү коюуtage ±3% |
| Жүктөө регламенти | ±3% |
| Quiescent Power Dissipation | <10мА |
| Иштөө температурасы | -25°C ~ 65°C |
| Сактоо температурасы | -40°C ~ 80°C |
| Иштөө нымдуулугу | 10% ~ 90% |
| Гидроизоляциялык даража | IP67 |
| Ашыкча ток коргоо | Ооба |
| Ашыкча температурадан коргоо | Ооба |
| Кыска туташуулардан коргоо | Жок |
| Өлчөмдөрү (L x W x Y) | 2.24 x 1.54 x 0.87 дюйм (5.7 x 3.9 x 2.2 см) |
| Installation Ear Diameter | 0.16 дюйм (0.4 см) |
Image 2: Physical dimensions of the converter, indicating length, width, and height for installation planning.
3. Пакеттин мазмуну
Пакетке төмөнкүлөр кирет:
- 1x DROK DC-DC Stabilizer (Boost Buck Converter)
4. Коопсуздук чаралары
ЭСКЕРТҮҮ: Бул коопсуздук нускамаларын аткарбоо өрт, электр шок же башка жаракат же зыянга алып келиши мүмкүн.
- Киргизүү көлөмүн камсыз кылыңызtage is within the specified range (DC 9V-36V). Exceeding this range can damage the device.
- Do not exceed the maximum output current of 3A or output power of 36W. Overloading the converter can lead to overheating and failure.
- This module does not have short-circuit protection. Exercise caution during wiring to prevent short circuits, which can cause damage to the converter and connected devices.
- Connect wiring strictly according to the provided instructions. Incorrect wiring can lead to malfunction or damage.
- Use appropriate wire gauges for input and output connections to ensure stable voltage and power delivery.
- Ensure proper ventilation if operating in enclosed spaces, although the aluminum shell aids in heat dissipation.
- Аппаратты күйүүчү материалдардан алыс кармаңыз.
- This is a non-isolated module; ensure proper grounding practices.
5. Орнотуу боюнча көрсөтмөлөр
Follow these steps for proper installation of your DROK Boost Buck Converter:
- Зымдарды даярдоо: Identify the input wires (Red for positive, Black for negative) and output wires (Yellow for positive, Black for negative).
- Киргизүү байланышы: Connect the red input wire to your DC power source's positive terminal (9V-36V). Connect the black input wire to the DC power source's negative terminal.
- Чыгуу туташуу: Connect the yellow output wire to the positive terminal of your 12V DC load. Connect the black output wire to the negative terminal of your 12V DC load.
- Зым өлчөгүч: Use short and thick input and output wires to minimize voltage drop and ensure sufficient power delivery to your load.
- Жүктөрдү башкаруу: If connecting multiple loads, ensure their combined current draw does not exceed 3A. Do not combine loads if there are multiple output wires from the converter.
- Power Margin: Always leave a margin for the power supply. For long-term stable operation, it is recommended to operate the converter at 80% or less of its maximum rated power (e.g., for 36W, aim for loads up to 28.8W).
- Монтаждоо: The converter features mounting ears with 0.16-inch diameter holes for secure installation. Mount the device in a location that allows for adequate heat dissipation.
Image 3: Detailed wiring diagram for the DROK Boost Buck Converter, showing input (IN) and output (OUT) connections with corresponding wire colors.
6. Иштөө нускамалары
Once properly installed and wired according to the instructions in Section 5:
- Күйгүзүү: Apply DC power within the 9V-36V range to the input terminals. The converter will automatically step up or step down the voltage to a stable 12V output.
- Монитор жүктөө: Ensure the connected load does not draw more than 3A. Continuous operation above the rated current can trigger over-current protection or lead to device failure.
- Экологиялык шарттар: The converter is designed for operation in temperatures from -25°C to 65°C and is IP67 waterproof, dust-proof, moisture-proof, and shock-proof. However, avoid prolonged exposure to extreme conditions beyond its specified limits.
7. Техникалык тейлөө
The DROK Boost Buck Converter is designed for low maintenance. Follow these general guidelines to ensure its longevity:
- Үзгүлтүксүз текшерүү: Мезгил-мезгили менен бардык зымдарды байланыштарды текшерип туруңуз, алар коопсуз жана коррозия же зыянга учурабайт.
- Тазалоо: If necessary, gently clean the exterior of the converter with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
- Курчап турган чөйрөнү коргоо: Despite its IP67 rating, avoid submerging the device in water for extended periods or exposing it to high-pressure water jets.
- Жүктөрдү башкаруу: Ensure the connected load remains within the specified limits to prevent undue stress on the converter.
8. Кыйынчылыктарды
If you encounter issues with your DROK Boost Buck Converter, consider the following:
- No Output Voltage:
- Киргизилген томду ырастооtage is present and within the 9V-36V range.
- Бардык зымдардын туташууларынын туура полярдуулугун жана бекем байланышын текшериңиз.
- Ensure the load is not short-circuited, as this module lacks short-circuit protection.
- Check if the converter has triggered its over-current or over-temperature protection. Disconnect power, allow it to cool, and reduce the load before reconnecting.
- Туруксуз чыгаруу Voltage:
- Ensure input wires are short and thick enough to prevent significant voltagд тамчы.
- Verify the load current does not exceed 3A.
- Бош байланыштарды текшериңиз.
- Ашыкча ысып кетүү:
- Reduce the connected load to ensure it is within the recommended operating margin.
- Ensure the converter is mounted in a location with adequate airflow.
- Verify ambient operating temperature is within the specified range.
If problems persist after following these steps, contact DROK customer support for further assistance.
9. Кепилдик жана колдоо
DROK products are designed for reliability and performance. For specific warranty details regarding your Boost Buck Converter, please refer to the product packaging or the official DROK website. Typically, DROK offers a one-year warranty period for quality issues, providing a brand new replacement if applicable.
For technical support, troubleshooting assistance, or warranty claims, please contact DROK customer service through their official channels. You can often find contact information on the product's purchase page or the manufacturer's webсайт.
