EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Модел: ZM4328

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Коопсуздук нускамалары

  • Электр коопсуздугу: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Ensure the power supply is disconnected before installation or maintenance.
  • Тtage: This product operates on a 230V AC power supply.
  • IP54 рейтинги: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Жарык булагы: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Иштөө температурасы: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Орнотуу жана орнотуу

Туура орнотуу үчүн бул кадамдарды аткарыңыз:

  1. Кубатты өчүрүү: Баштоодон мурун, орнотуу аймагына негизги электр энергиясы өчүргүчтөн өчүрүлгөнүн текшериңиз.
  2. Монтаждоо бетин даярдоо: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Монтаждык кронштейнди тиркөө: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Артка view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

3-сүрөт: Арткы view with mounting bracket.

  1. Зымдар: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Күчтү калыбына келтирүү: Switch the main power supply back on.

5. Иштөө нускамалары

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Motion Sensor Functionality

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • аныктоо диапазону: Adjusts the maximum distance at which motion is detected.
  • Кармап туруу убактысы: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Сенсор кайсы учурда активдүү боло турган айлана-чөйрөнүн жарык деңгээлин аныктайт. Мисалы,ample, you can set it to only activate when it's dark.

Эскертүү: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Техникалык тейлөө

  • Тазалоо: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Курт-кумурскаларды коргоо: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Колдонуучунун тейлөөчү тетиктери жок: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7. Кыйынчылыктарды

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

КөйгөйМүмкүн себепЧечим
Жарык күйбөйт.Электр энергиясы жок.
Туура эмес зым.
Daylight sensor setting too high.
Ажыраткычты жана электр туташуусун текшериңиз.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Жарык тынымсыз күйүп турат.Үзгүлтүксүз кыймыл аныкталды.
Hold time setting too long.
Сенсордун бузулушу.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Эгер көйгөй чечилбесе, колдоо кызматына кайрылыңыз.
Жарык өтө тез-тез күйүп/өчүп турат.Сезгичтик өтө жогору.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Сезгичтик өтө төмөн.
Detection range too narrow.
Тоскоолдукту бөгөттөөчү сенсор.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Техникалык шарттар

БрендEMOS
Модель номериZM4328
Өлчөмдөрү (Диаметри x Бийиктиги)220 мм x 53 мм (болжол менен 8.66 дюйм x 2.09 дюйм)
Салмагы622 грамм (болжол менен 1.37 фунт)
Күч15 Ватт
Жарык агымы1500 люмен
Түс температурасы4000 Кельвин (нейтралдуу ак)
Түстөрдү көрсөтүү индекси (CRI)80
Incandescent Equivalence100 Ватт
Тtage230 Вольт
IP рейтингиIP54
МатериалAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
ӨзгөчөлүктөрMicrowave Motion Detector, Energy-saving, Waterproof
Энергия эффективдүүлүгү классыE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Сүрөт 6: Продукциянын өлчөмдөрү.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Кепилдик жана колдоо

Кепилдик

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3 жылдык кепилдик сатып алынган күндөн тартып. Кепилдик дооматтары үчүн сатып алганыңыздын далилин сактап коюңуз. Кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

Кардарларды колдоо

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webсайт.