1. Киришүү
Thank you for choosing the WORKPRO 3.6V Electric 2-in-1 Staple Gun and Brad Nailer. This tool is designed for various fastening tasks, including upholstery, material repair, woodworking, decoration, furniture, and DIY projects. It is compatible with JT21 staples and BN18 brad nails. Please read this manual thoroughly before operation to ensure safe and efficient use.
Image 1.1: WORKPRO Electric Staple Gun and Brad Nailer with included fasteners and USB cable.
2. Коопсуздук нускамалары
Жеке жаракат алуу же шайманга зыян келтирүү коркунучун азайтуу үчүн ар дайым негизги коопсуздук чараларын аткарыңыз.
- Бардык нускамаларды окуңуз: Familiarize yourself with the tool's operation and safety features before use.
- Көздү коргоо: Always wear appropriate eye protection (safety glasses) when operating the tool.
- Колду коргоо: Wear gloves to protect hands from potential hazards.
- Иш чөйрөсү: Жумушчу жерди таза, жакшы жарык жана тоскоолдуктардан алыс кармаңыз.
- Коопсуз жумуш бөлүгү: Иштеп жаткан материалдын бекем жана бекем экенине ынаныңыз.
- Triple Safety Mechanism: The tool features three safety switches. It will only fire when the ON button is activated, the trigger is pressed, and the contact safety device is fully depressed against the workpiece.
- Колдонулбаганда өчүрүү: Always turn off the power switch (position "O") when the tool is not in use, during loading/unloading, or during maintenance.
- Ашыкча ысып кетүүдөн сактаныңыз: To prevent damage, do not exceed 30 shots per minute. Allow a 1-minute break for every 100 nails fired.
- Correct Fasteners: Only use 1/4"-9/16" JT21 staples and 5/8" 18GA BN18 nails. Using incorrect fasteners (e.g., T50 staples) can damage the tool.
- Not for Hardwoods: This tool is not suitable for professional carpentry or nailing hardwoods.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- 1 x WORKPRO 3.6V Electric 2-in-1 Staple Gun and Brad Nailer
- 1000 x JT21 Staples (1/4"-9/16")
- 1000 x BN18 Brad Nails (5/8" 18GA)
- 1 x USB заряддоо кабели
4. Продукттун өзгөчөлүктөрү жана компоненттери
Familiarize yourself with the different parts of your electric staple gun/nailer.
Image 4.1: Labeled components of the WORKPRO Electric Staple Gun, including LED indicator, charge port, ON/OFF switch, trigger, contact safety, nail viewer window, and quick release magazine.
- ON/OFF которуу: Аспаптын кубаттуулугун көзөмөлдөйт.
- LED көрсөткүчү: Displays charging status (Red for low power/charging, Green for full charge/shooting).
- Заряддоо порту: USB заряддоо кабелин туташтыруу үчүн.
- Триггер: Activates the firing mechanism when safety conditions are met.
- Contact Safety Device: Куралдын атылышы үчүн, аны даярдалган тетикке басуу керек.
- Тырмак Viewer Window: Allows checking the remaining fastener level.
- Quick Release Magazine: For loading staples and nails.
5. Орнотуу
5.1 Батареяны заряддоо
The electric staple gun is powered by a 3.6V Lithium-Ion battery. Ensure the tool is fully charged before first use.
- Connect the provided USB charging cable to the charge port on the tool.
- Connect the other end of the USB cable to a 5V DC power source (e.g., mobile phone charger, computer USB port, power bank).
- The LED indicator will show Кызыл заряддоо учурунда.
- Charging typically takes 1-2 hours. The LED indicator will turn Жашыл толук заряддалганда.
- A full charge can fire up to 1000 nails/staples.
Image 5.1: Illustration of fast charging capability (1-2 hours) using a 5V DC power source.
Image 5.2: Information on battery capacity (2000mAh 3.6V) and shots per full charge (800-1000).
5.2 Loading Staples and Nails
Ensure the power switch is in the "O" (OFF) position before loading fasteners.
Сүрөт 5.3: Бүттүview of compatible fasteners: JT21 Staples (1/4"-9/16") and 18GA Brad Nails (5/8").
- Pull out the magazine cover: Locate the quick release magazine at the bottom of the tool and pull out its cover.
- Степлерди жүктөө: Place JT21 staples into the magazine with their points facing upwards.
- Тырмактарды жүктөө: Place BN18 nails into the loading side of the magazine with their points facing upwards.
- Close the magazine cover: Push the magazine cover back until it locks securely into place.
Image 5.4: Visual guide for loading fasteners: pulling out the magazine, placing staples with points up, placing nails with points up, and closing the magazine.
Image 5.5: Emphasizes placing staples with points upwards.
6. Куралды иштетүү
Follow these steps to operate your WORKPRO Electric Staple Gun/Brad Nailer safely and effectively.
- Күйгүзүү: Slide the ON/OFF switch to the "I" (ON) position. The LED indicator will turn green if the battery has sufficient charge.
- Куралды жайгаштырыңыз: Place the contact safety device firmly against the surface of the object where you intend to fasten.
- Squeeze the Trigger: While maintaining firm contact with the workpiece, squeeze the trigger to fire a staple or nail.
- Monitor Fastener Level: Тырмакты колдонуңуз viewer window to check the remaining fasteners and reload as needed.
- Колдонгондон кийин: Always slide the ON/OFF switch to the "O" (OFF) position when you have finished using the tool or before performing any adjustments or maintenance.
Image 6.1: Illustrates the three steps for safe operation: Power Switch On, Press Contact Safety Device Down Completely, and Squeeze the Trigger to Shoot.
6.1 Сунушталган колдонмолор
This tool is suitable for various light to medium-duty fastening tasks:
- Upholstery projects
- Material repair (e.g., fabric, paper, leather)
- Woodworking with softwood products
- Decorative tasks
- Furniture assembly and repair
- General DIY projects
Сүрөт 6.2: Мисamples of proper use, including pet house construction, DIY wood products, photo frame assembly, and upholstery.
7. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө куралыңыздын узак мөөнөттүү жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Keep the tool clean and free from dust and debris. Use a dry cloth to wipe down the exterior.
- Сактагыч: Store the tool in a dry, cool place, away from direct sunlight and moisture. Ensure the power switch is OFF.
- Батареяга кам көрүү: Do not store the tool with a completely discharged battery for extended periods. Charge it periodically if not in use.
- Fastener Magazine: Periodically check the magazine for any obstructions or bent fasteners that could cause jamming.
- Ашыкча колдонуудан качыңыз: Adhere to the recommended firing rate (no more than 30 shots per minute, with a 1-minute break every 100 shots) to prevent motor overheating and potential damage.
8. Кыйынчылыктарды
Эгер көйгөйлөргө туш болсоңуз, төмөнкү жалпы көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Курал күйбөйт | Кубат өчүргүч ӨЧҮК Батарея түгөндү Contact safety not fully depressed Magazine is empty Бекиткичтин тыгылышы | Кубат өчүргүчтү ON күйгүзүңүз Батареяны заряддаңыз Press tool firmly against workpiece Reload fasteners Clear any jammed fasteners (ensure power is OFF) |
| Fasteners do not fully penetrate | Incorrect fastener type Working on hardwood Батарея заряды аз | Ensure correct JT21 staples or BN18 nails are used This tool is not for hardwoods; use on softwoods Батареяны толук заряддаңыз |
| Аспап тез-тез тыгылып калат | Incorrect fastener type Bent or damaged fasteners Magazine not properly closed Firing too rapidly | Use only specified fasteners Inspect fasteners before loading Ensure magazine is securely locked Adhere to recommended firing rate (max 30 shots/min) |
| Батарея заряддалбай жатат | USB cable or charger faulty Charge port obstructed | Try a different USB cable or 5V DC charger Check charge port for debris |
9. Техникалык шарттар
Technical details for the WORKPRO Electric Staple Gun and Brad Nailer.
Image 9.1: Visual representation of the tool's dimensions and key specifications.
- Модел: W125177AE
- Кубат булагы: 3.6V Lithium-Ion Battery (2000mAh)
- Заряддоо Voltage: 5V DC
- Заряддоо убактысы: 1-2 саат
- Max Shots per Charge: 800-1000
- Max Shot Rate: 30 shots/minute (with 1-minute break every 100 shots)
- Шайкеш келүүчү степлерлер: JT21 (1/4"-9/16" / 6-14mm)
- Compatible Nails: BN18 (5/8" 18GA / 15mm)
- Элемент Салмагы: 1.76 фунт (0.8 кг)
- Продукциянын өлчөмдөрү: 5.71"L x 5.67"W x 0.1"H (approximately 14.5cm x 14.4cm)
- Материал: Acrylonitrile бутадиен Styrene
- Түсү: Боз
10. Кепилдик жана колдоо
For warranty information or technical support, please refer to the documentation included with your purchase or contact WORKPRO customer service. Keep your purchase receipt as proof of purchase.
