1. Киришүү
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Stealth 12 Gallon Ultra Quiet Air Compressor (Model SAQ-11215) and the ColorFit by Milton Coupler & Plug Kit (Model S-314MKIT). Please read this manual thoroughly before initial use to ensure proper function and to prevent injury or damage.
2. Коопсуздук маалыматы
Always observe basic safety precautions when using electrical appliances and air tools to reduce the risk of fire, electric shock, and personal injury.
Жалпы коопсуздук эрежелери:
- Компрессорду иштетүүдөн мурун бардык көрсөтмөлөрдү окуп чыгыңыз.
- Тиешелүү жеке коргонуу шаймандарын (ЖКК), анын ичинде коопсуздук көз айнектерин, угууну коргоону жана кол каптарды кийиңиз.
- Иш аянты таза, жакшы жарык жана тоскоолдуктар жок болушун камсыз кылыңыз.
- Компрессорду төмөнкү температурада иштетпеңизamp or wet locations, or in the presence of flammable liquids or gases.
- Балдарды жана жанында тургандарды иштеп жаткан компрессордон алыс кармаңыз.
- Кандайдыр бир оңдоолорду же оңдоолорду аткаруудан мурун ар дайым кубат менен камсыздоону ажыратыңыз.
- Do not exceed the maximum operating pressure of any air tool or accessory.
- Regularly inspect the air tank for rust or damage. Do not use a damaged tank.
- Drain condensation from the air tank daily to prevent corrosion.
Электр коопсуздугу:
- электр менен жабдууну камсыз кылуу voltage matches the compressor's requirements (12 Volts).
- Use only grounded outlets.
- Do not use extension cords unless absolutely necessary, and ensure they are properly rated for the compressor's power requirements.
- Never carry the compressor by its power cord.
3. Продукт бүтүп калдыview
3.1 Stealth 12 Gallon Ultra Quiet Air Compressor
The Stealth SAQ-11215 is a 12-gallon, 1.5 HP oil-free air compressor designed for quiet operation and long life. It features a maximum pressure of 150 PSI and is equipped with wheels and a handle for portability.
Сүрөт 3.1: Алдыңкы view of the Stealth 12 Gallon Ultra Quiet Air Compressor. This image shows the main unit with its control panel, tank, wheels, and handle.
Негизги компоненттер:
- Аба танкы: 12-gallon capacity, stores compressed air.
- Мотор/насос монтажы: 1.5 HP oil-free motor for quiet and maintenance-free operation.
- Манометрлер: Бактагы басымды жана жөнгө салынуучу чыгуу басымын көрсөтөт.
- Жөнгө салгыч баскычы: Чыгуучу аба басымын жөнгө салат.
- Тез туташтыргычтар: Two outlets for connecting air tools.
- Дренаж клапаны: Конденсацияны төгүү үчүн резервуардын түбүндө жайгашкан.
- Дөңгөлөктөр жана туткасы: Жеңил ташуу үчүн.
Figure 3.2: Dimensions of the Stealth 12 Gallon Air Compressor. This image provides a visual representation of the compressor's height, width, and depth, along with key specifications like tank size, horsepower, and noise level.
3.2 ColorFit by Milton Coupler & Plug Kit (M-Style, Red)
The Milton S-314MKIT is a 14-piece M-Style coupler and plug kit designed for easy identification and connection of air tools. The red color coding helps distinguish air lines.
Figure 3.3: The complete ColorFit by Milton Coupler & Plug Kit. This image displays all 14 pieces of the kit, including male and female plugs and couplers, all in a distinctive red finish.
Комплекттин мазмуну:
- 6 Male Plugs (1/4" NPT)
- 4 Female Plugs (1/4" NPT)
- 2 Male Couplers (1/4" NPT)
- 2 Female Couplers (1/4" NPT)
All components are M-Style (Industrial) and feature a scratch-resistant anodized red coating. They are compatible with traditional Milton M-style and competitor M-style couplers and plugs.
4. Орнотуу
4.1 Air Compressor Setup:
- Пакеттен чыгаруу: Компрессорду анын таңгагынан кылдаттык менен чыгарып алыңыз. Ар кандай жеткирүү зыянын текшериңиз.
- Muffler Installation: Attach the included air filter/muffler assemblies to the intake ports on the pump head.
- Жайгашкан жери: Position the compressor on a firm, level surface in a well-ventilated area. Ensure adequate clearance around the unit for air circulation.
- Дренаж клапаны: Ensure the drain valve at the bottom of the tank is closed before operation.
- Кубат туташуу: Plug the power cord into a grounded 12-volt electrical outlet.
4.2 Coupler & Plug Kit Setup:
- Компоненттерди аныктоо: Familiarize yourself with the male plugs, female plugs, male couplers, and female couplers.
- Жип Герметик: Apply thread sealant tape (not included) to the male threads of all plugs and couplers before installation to ensure an airtight seal.
- Attach Plugs to Tools: Thread the appropriate male or female plug onto the air inlet of your pneumatic tools. Tighten securely.
- Attach Couplers to Hoses: Thread the appropriate male or female coupler onto the ends of your air hoses. Tighten securely.
- Түс коддоо: Utilize the red color to designate specific air lines (e.g., for lubricated vs. non-lubricated air, or high vs. low pressure) to prevent cross-contamination.
5. Иштөө нускамалары
5.1 Initial Break-in Procedure (Compressor Only):
Before first use, perform a 20-minute break-in to ensure optimal performance and longevity.
- With the power cord plugged in, turn the compressor's power switch to the "ON" position.
- Open the tank drain valve completely (located at the bottom of the tank). This will prevent pressure from building up.
- Allow the compressor to run for 20 minutes with the drain valve open. This helps seat the piston rings.
- After 20 minutes, turn the power switch to "OFF" and close the drain valve.
5.2 Standard Operation:
- Күйгүзүү: Ensure the drain valve is closed. Turn the power switch to "ON". The compressor will begin to fill the tank.
- басымды жогорулатуу: The compressor will run until the tank pressure reaches its maximum (150 PSI), then it will shut off automatically.
- Чыгаруу басымын тууралоо: Turn the regulator knob clockwise to increase output pressure and counter-clockwise to decrease it. Monitor the "TOOL" gauge for the desired pressure.
- Аба куралын туташтыруу: Pull back the collar on the quick coupler, insert the air tool's plug, and release the collar to secure the connection.
- Колдонуу куралы: Operate your pneumatic tool as per its own instruction manual. The compressor will cycle on and off automatically to maintain tank pressure as air is consumed.
- Disconnect Tool: Before disconnecting, ensure the air tool is not under pressure. Pull back the quick coupler collar to release the plug.
- Өчүрүү: When finished, turn the power switch to "OFF".
- Дренаждык танк: Slowly open the drain valve to release all air pressure from the tank. Once pressure is at zero, leave the valve open to drain any accumulated moisture. Close the valve before next use.
Figure 5.1: Common applications for the Stealth Air Compressor. This image illustrates various pneumatic tools and tasks the compressor can support, including inflating, cleaning, caulk gun, roofing nailer, drill, paint sprayer, stapler pinner, brad/finishing nailer, wrench, chisel, and spray gun.
6. Техникалык тейлөө
Аба компрессоруңуздун үзгүлтүксүз техникалык тейлөөсү анын узак мөөнөттүү жана коопсуз иштешин камсыз кылат.
Күнүмдүк тейлөө:
- Дренаждык танк: Always drain condensation from the air tank after each use. This prevents rust and extends tank life.
- Агышууларды текшерүү: Check all connections and hoses for air leaks. A soapy water solution can be used to detect leaks.
Жумалык/айлык техникалык тейлөө:
- Таза аба чыпкасы: The compressor is oil-free, but the air filter should be inspected and cleaned or replaced if dirty to ensure proper airflow to the pump.
- Электр кабелин текшерүү: Check the power cord for any signs of damage, fraying, or exposed wires.
- бекиткичтерди текшерүү: Бардык гайкалар, болттор жана бурамалар бекем болушун текшериңиз.
Coupler & Plug Kit Maintenance:
- Таза: Keep couplers and plugs free from dirt and debris.
- Майлоо (кошумча): A small amount of pneumatic tool oil can be applied to the moving parts of couplers to ensure smooth operation, but avoid over-lubrication, especially if using with non-lubricated air tools.
- эскирүү үчүн текшерүү: Replace any worn or damaged couplers or plugs to maintain an airtight seal and prevent air leaks.
7. Кыйынчылыктарды
Бул бөлүмдө аба компрессоруңузда кездешүүсү мүмкүн болгон жалпы маселелер каралат.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Compressor does not start or runs intermittently. |
|
|
| Компрессор тынымсыз иштейт же өтө тез-тез иштейт. |
|
|
| Куралдагы аба басымы төмөн. |
|
|
| Ашыкча ызы-чуу же титирөө. |
|
|
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Model (Compressor) | SAQ-11215 |
| Model (Coupler & Plug Kit) | S-314MKIT |
| Танк сыйымдуулугу | 12 галлон |
| Ат күчү (HP) | 1.5 HP |
| Максималдуу басым | 150 PSI |
| CFM @ 90 PSI | 4.0 CFM |
| CFM @ 40 PSI | 5.0 CFM |
| Ызы-чуу деңгээли | 68 дБ |
| Мотор түрү | Индукциялык мотор |
| Майсыз | Ооба |
| Танк материалы | Q235B Steel |
| Тtage | 12 вольт |
| Coupler Style | M-Style (Industrial) |
| Coupler & Plug NPT Size | 1/4" NPT |
9. Кепилдик жана колдоо
For warranty information, technical support, or to order replacement parts, please contact Stealth customer service. Refer to the product packaging or the manufacturer's official webакыркы байланыш маалыматы үчүн сайт.
When contacting support, please have your product model number (SAQ-11215 for the compressor, S-314MKIT for the coupler kit) and date of purchase readily available.
