MAF 14 дюймдук толук өлчөмдөгү металл платформалуу керебеттин рамасы үчүн колдонмо

1. Коопсуздук маалыматы

Сураныч, чогултуу жана колдонуу алдында бардык нускамаларды окуп жана түшүнүү. Бул колдонмону келечектеги маалымат үчүн сактаңыз.

• Салмак сыйымдуулугу: This bed frame is designed to support a maximum weight of 3000 pounds. Do not exceed this limit.
• Курч жээктер: Exercise caution around metal edges during assembly to prevent injury.
• Балдар: Балдарды чогултуу жайынан алыс кармаңыз. Майда бөлүктөр муунуп калуу коркунучун жаратышы мүмкүн.
• Ассамблея: Колдонуудан мурун бардык болттор жана бекиткичтер бекем бекемделгенин текшериңиз. Мезгил-мезгили менен текшерип, зарыл болсо, кайра бекемдөө.
• Колдонуу: Do not jump on the bed frame. Distribute weight evenly across the surface.

2. Пакеттин мазмуну

Монтаждоону баштоодон мурун бардык компоненттер бар экендигин текшериңиз. Эгерде кандайдыр бир бөлүктөрү жок же бузулуп калса, кардарларды колдоо менен байланышыңыз.

• Bed Frame Sections (various pieces)
• Steel Support Slats
• Аппараттык пакет (буроолор, шайбалар, Аллен ачкычы)
• Anti-Slip Mattress Baffles
• Резина буттары
• Instruction Manual

3. Монтаждоо боюнча нускамалар

Assembly typically takes approximately 20 minutes with one person. Two people may expedite the process.

1. Компоненттерди таңгактан чыгаруу: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a rug or blanket) to prevent scratches.
2. Рамка бөлүмдөрүн чогултуу: Connect the main frame sections using the provided screws and Allen wrench. Important: Do not fully tighten any screws until all frame sections are loosely assembled. Бул туура тегиздөөгө мүмкүндүк берет.
3. Колдоо лайнерлерин орнотуу: Place the steel support slats into the designated slots on the frame. Ensure they are securely seated. The U-shaped grooves help fix the slats in place.
4. Attach Anti-Slip Baffles: Install the plastic anti-slip baffles on the frame as indicated in the diagram to prevent the mattress from sliding. Ensure they are mounted outwards.
5. Attach Rubber Foot Pads: Secure the rubber foot pads to the bottom of each leg. These protect your floor and reduce noise.
6. Акыркы бекемдөө: Once all components are in place and aligned, systematically tighten all screws until they are secure. Do not overtighten.

Figure 3.1: Correct installation of mattress stoppers (mounted outwards).

Figure 3.2: ашыкview of bed frame features and components.

4. Иштөө нускамалары

4.1 Матрацты жайгаштыруу

This platform bed frame is designed to be used without a box spring. Simply place your mattress directly onto the steel support slats. The integrated anti-slip baffles will help keep your mattress in position.

Figure 4.1: Bed frame with mattress, illustrating no box spring is required.

4.2 Керебеттин астына сактоочу жай

The 14-inch height of the bed frame provides 12.4 inches of clearance underneath, offering ample space for storage. Utilize this area for bins, luggage, or other items to maximize your bedroom space.

Figure 4.2: Under-bed storage space with items placed beneath the frame.

5. Техникалык тейлөө

• Тазалоо: Металл рамканы жарнама менен сүртүңүзamp кездеме жана жумшак жуугуч. Финишке зыян келтирүүчү абразивдүү тазалагычтардан алыс болуңуз.
• Бекер текшерүү: Periodically (e.g., every 3-6 months) inspect all screws and bolts to ensure they remain tight. Re-tighten if any looseness is detected.
• Пол коргоо: Ensure the rubber foot pads are intact and properly seated to continue protecting your flooring.

6. Кыйынчылыктарды

• Ызы-чуу/чырылдаган үн: If the frame develops noise, check all connections and ensure screws are tightly fastened. Verify that the rubber foot pads are correctly installed and that the mattress is not directly rubbing against metal parts.
• Матрацтын жылдырылышы: Ensure the plastic anti-slip baffles are properly installed and facing outwards. If sliding persists, consider using a non-slip mattress pad between the mattress and the frame.
• Туруксуздук: If the frame feels unstable, immediately cease use and re-check all assembly steps, ensuring all components are correctly aligned and all fasteners are fully tightened.

7. Өзгөчөлүктөрү

• Оор жүк ташуучу болот конструкциялары: Manufactured from robust steel, capable of supporting up to 3000 pounds, ensuring durability and stability.
• Optimal Under-Bed Storage: Provides 12.4 inches of clearance, offering significant space for storing personal items and maximizing room utility.
• Коопсуздукка багытталган дизайн: Features rounded corners on the legs to minimize the risk of accidental bumps and injuries.
• Матрацтын туруктуулугу: Equipped with plastic anti-slip baffles and U-shaped grooves to prevent the mattress from shifting or sliding.
• Floor Protection & Noise Reduction: Includes rubber foot pads on all legs to protect flooring from scratches and reduce operational noise.
• Кутуча пружинасы талап кылынбайт: Dependable steel slats provide direct support for your mattress, eliminating the need for a box spring.
• Жөнөкөй чогултуу: Designed for straightforward assembly, typically completed by one person within 20 minutes using the included tools.

Figure 7.1: Illustration of the bed frame's 3000 lbs weight capacity.

Figure 7.2: Close-up of safety and stability features.

8. Техникалык шарттар

Key specifications for the MAF 14 Inch Full Size Metal Platform Bed Frame.

Figure 8.1: Full size bed frame dimensions.

9. Кепилдик жана колдоо

This MAF bed frame comes with a Сатуудан кийинки 5 жылдык тейлөө, ensuring support for any manufacturing defects or issues arising from normal use.

For assistance, missing parts, or warranty claims, please contact MAF customer support through the retailer's platform or visit the official MAF website. Please have your model number (MT10-JD-AMZ01-14F) and purchase date available when contacting support.

We are committed to providing a satisfactory solution as quickly as possible.