Introduction
This manual provides essential instructions for the use and care of your Nerf 20,000 Gelfire Rounds Refill with 800 Round Hopper. These soft, super absorbent polymer projectiles are designed for use with Nerf Pro Gelfire blasters (sold separately) and burst on impact, requiring no cleanup. Please read this manual thoroughly before use to ensure proper operation and safety.

Image: The Nerf Gelfire 20,000 rounds refill pack, showing five packets of dehydrated rounds and the 800-round hopper filled with hydrated rounds.
Коопсуздук маалыматы
ЭСКЕРТҮҮ: Чакан бөлүктөр пайда болушу мүмкүн. 3 жашка чейинки балдар үчүн эмес.
- Көздү же бетти максат кылбаңыз.
- Use of eyewear is always required for players and people within range.
- Use only with Nerf Gelfire blasters and as directed.
- Use only clean tap water to hydrate Gelfire rounds.
- Do not freeze or modify rounds.
- Impact from rounds may cause temporary marks on skin.
- Бул оюнчук эмес.
- 14 жана андан жогорку жаштагыларга сунушталат.
- Always read Gelfire blaster instructions before use for important safety information.
Пакеттин мазмуну
Your Nerf Gelfire Refill package includes:
- 20,000 Dehydrated Nerf Pro Gelfire Rounds (typically in multiple packets)
- 1 x 800-Round Capacity Hopper

Сүрөт: алдыңкы view of the Nerf Pro Gelfire Hopper + 20,000 Rounds Refill packaging.
Жайгашуу
1. Hydrating Gelfire Rounds
Gelfire rounds are supplied in a dehydrated state and must be hydrated before use. This process typically takes a few hours.
- Empty one or more packets of dehydrated Gelfire rounds into a large container.
- Add a generous amount of clean tap water to the container, ensuring the rounds are fully submerged.
- Allow the rounds to soak for at least 3-4 hours, or until they have expanded to their full size (approximately 7-8mm in diameter). They should feel soft and squishy.
- Drain any excess water from the container. The rounds are now ready for use.

Image: Visual guide showing dehydrated Gelfire rounds in packets transforming into hydrated rounds in cups after adding water.
2. Filling the 800-Round Hopper
The included hopper has an 800-round capacity and is designed for quick loading onto compatible Nerf Pro Gelfire blasters.
- Ensure the Gelfire rounds are fully hydrated and excess water has been drained.
- Unscrew the cap from the bottom of the 800-round hopper.
- Carefully pour the hydrated Gelfire rounds into the hopper until it is full. Do not overfill.
- Securely screw the cap back onto the hopper.

Image: Back of the product packaging, highlighting the 800-round capacity hopper filled with Gelfire rounds.
Иштеп жатат
Once your Gelfire rounds are hydrated and loaded into the hopper, you can attach the hopper to a compatible Nerf Pro Gelfire blaster (sold separately).
- Refer to your specific Nerf Pro Gelfire blaster's instruction manual for details on how to attach the hopper. Typically, the hopper will twist or click into place on the blaster.
- Ensure the hopper is securely attached before operating the blaster.
- Follow the blaster's instructions for firing. The hydrated Gelfire rounds will burst upon impact with a target.
Эскертүү: Always wear appropriate eye protection when using Nerf Pro Gelfire blasters and rounds.
Техникалык тейлөө
- Storage of Hydrated Rounds: Hydrated Gelfire rounds can be stored in an airtight container for a limited time to prevent them from drying out. If they begin to shrink, re-submerge them in water.
- Cleaning the Hopper: After use, the hopper can be rinsed with clean water to remove any residue. Ensure it is completely dry before storing.
- Жоюу: Gelfire rounds are biodegradable. Dispose of used or unwanted rounds responsibly according to local guidelines.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Rounds are not firing correctly. | Rounds are not fully hydrated or are too dry. | Re-hydrate rounds in water for several hours until fully expanded. |
| Hopper not attaching to blaster. | Incorrect alignment or incompatible blaster model. | Ensure correct alignment. Verify your blaster is a Nerf Pro Gelfire model. Consult your blaster's manual. |
| Rounds are too small or too hard. | Insufficient hydration time. | Allow rounds to soak for a longer period (up to 4 hours or more) until they reach the correct size and consistency. |
Техникалык шарттар
- Продукциянын өлчөмдөрү: 2.5 x 4 x 7 дюйм
- Элемент Салмагы: 5.6 унция
- Модель номери: F7266
- Өндүрүүчүнүн сунуштаган жашы: 14 жаш жана андан жогору
- Чыккан датасы: 1-сентябрь, 2022-жыл
- Өндүрүүчү: Hasbro
- Rounds Quantity: 20,000 dehydrated rounds
- Хоппердин кубаттуулугу: 800 раунд
Кепилдик жана колдоо
For warranty information or product support, please contact Hasbro customer service directly. Refer to the product packaging or the official Nerf webакыркы байланыш маалыматы үчүн сайт.
Онлайн колдоо: www.hasbro.com





