Introduction
This manual provides essential information for the safe operation, maintenance, and optimal performance of your MEEPO Voyager X Electric Longboard Skateboard. Please read it thoroughly before your first ride to ensure a safe and enjoyable experience.
Коопсуздук маалыматы
Electric skateboards are powerful vehicles. Failure to follow safety guidelines can result in serious injury or death. Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and wrist guards. Ride within your skill level and be aware of your surroundings.
- Ар дайым тастыкталган туулга кийиңиз.
- Do not ride in wet conditions or on slippery surfaces.
- Avoid riding in heavy traffic or on uneven terrain.
- Жөө адамдардан жана башка унаалардан коопсуз аралыкты сактаңыз.
- Regularly inspect your board for damage or loose components.
- Understand and practice braking techniques before riding at high speeds.
- Adhere to local laws and regulations regarding electric skateboard use.
For detailed safety information, refer to the official safety document provided by Meepo, which can often be found on the product's support page or included with your purchase.
Пакеттин мазмуну
Upon opening your MEEPO Voyager X package, please verify that all the following items are included:
- MEEPO Voyager X Electric Longboard Skateboard
- Зымсыз алыстан башкаруу
- Кубат адаптери/заряддагыч
- T-Tool for adjustments
- Колдонуучунун Колдонмосу (бул документ)
- Electric Skateboard Rack Stand
- Additional Wheels (as specified in product description)
Image: The MEEPO Voyager X Electric Longboard Skateboard shown with its included rack stand.
Жайгашуу
1. Баштапкы заряддоо
Before your first ride, fully charge the skateboard's battery and the remote control. Connect the power adapter to the charging port on the skateboard and then to a power outlet. The charging indicator light will change when fully charged.
- Skateboard Charging Time: Болжол менен 2.7 саат.
- Ensure the charging port is clean and dry before connecting the charger.
2. Алыстан башкаруу жупташтыруу
Your remote control should be pre-paired. If not, or if you need to re-pair:
- Turn on the skateboard.
- Алыстан башкарууну күйгүзүңүз.
- Follow the specific pairing instructions in your remote control's mini-manual or on the Meepo website. Typically, this involves holding a button on both devices until they connect.
3. Pre-Ride Inspection
Always perform a quick inspection before each ride:
- Check wheel nuts and truck bolts for tightness.
- Ensure the battery enclosure is secure.
- Verify brake and acceleration response with the remote.
- Inspect wheels for damage or debris.
Иштөө нускамалары
1. Минүү режимдери
The MEEPO Voyager X features multiple riding modes to suit different skill levels and preferences. Refer to your remote control's display or manual to switch between modes (e.g., Beginner, Eco, Pro, Ludicrous).
Image: Visual representation of the MEEPO Voyager X's performance capabilities, including top speed, range, and hill climbing ability.
2. Acceleration and Braking
Use the throttle wheel/lever on the remote control to accelerate and brake. Gradually apply throttle for smooth acceleration. To brake, gently pull the throttle back. Practice in an open, safe area before riding in public.
3. Turning and Carving
Shift your body weight to initiate turns, similar to a traditional skateboard. The trucks can be adjusted for tighter or looser turning response using the T-tool.
Техникалык тейлөө
1. Тазалоо
Тактаны жарнама менен сүртүңүзamp cloth after each ride, especially if riding in dusty or dirty conditions. Avoid using excessive water or harsh chemicals, particularly near electronic components.
2. Батареяга кам көрүү
- Store the board in a cool, dry place.
- Do not store the battery fully discharged for extended periods. Charge it to about 50-60% for long-term storage.
- Батареяны экстремалдуу температурага тийгизүүдөн сактаңыз.
3. Wheel and Bearing Maintenance
Regularly check wheels for wear and tear. Rotate wheels periodically for even wear. Clean bearings if they become noisy or sluggish; specialized bearing cleaners are recommended.
4. Truck and Bushing Inspection
Ensure truck bolts are tight and bushings are not cracked or excessively worn. Replace worn bushings to maintain proper turning response.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Плата күйбөй жатат | Батареянын аздыгы; Кубат баскычы туура басылган жок | Charge the board; Press and hold the power button firmly. |
| Пульт туташпай жатат | Пульттун батареясы аз; Жупташтырылган эмес; Тоскоолдук | Charge remote; Re-pair remote (see Setup section); Move away from strong signal sources. |
| Жүрүү учурунда күчтүн жоголушу | Battery low; Overheating; Loose connection | Charge battery; Allow board to cool down; Check all visible connections. |
| Дөңгөлөктөрдөн/моторлордон чыккан адаттан тыш үндөр | Debris in motor; Worn bearings; Loose components | Inspect motors for foreign objects; Clean/replace bearings; Tighten all bolts. |
If you encounter issues not listed here, or if solutions do not resolve the problem, please contact Meepo customer support.
Техникалык шарттар
Key technical specifications for the MEEPO Voyager X Electric Longboard Skateboard:
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Мипо |
| Модел | Voyager X |
| Эң жогорку ылдамдык | 40 mph чейин |
| Узак аралык | 31 миляга чейин |
| Мотор түрү | 2800W Hub Motor (Dual 6358 BLDC motor, 2772 Watts x 2) |
| Батарея | 12S3P Molicel P42A, 544 Wh |
| Максималдуу жүктөө сыйымдуулугу | 330 фунт |
| Палубанын материалы | Bamboo & Fiberglass (10 Ply) |
| Палубанын узундугу | 980 миллиметр |
| Палубанын кеңдиги | 298 миллиметр |
| Элемент Салмагы | 10.8 килограмм |
| Wheel Size | 90 миллиметр |
| Дөңгөлөк материалы | Полиуретан |
| Заряддоо убактысы | 2.7 саат |
| ESC | LYFOC 55B ESC (Smart and precise control) |
Сүрөт: деталдуу view of the MEEPO Voyager X's battery and motor specifications.
Кепилдик жана колдоо
Meepo offers customer support and warranty services for their products. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Meepo webсайт.
Байланыш маалыматы:
- Жандуу чат: info@meepoboard.com
- Дарек: G/f Hang Wai Indctmo 6 Kin Tai St, Tuen Mun Nt Hong Kong
Image: Meepo's customer support details, including contact information.
