HUNSN RJ03 Micro Firewall Appliance User Manual

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your HUNSN RJ03 Micro Firewall Appliance. The RJ03 is a compact, fanless mini PC designed for network security applications, including use as a firewall, VPN router, or other network appliance. It features an Intel Celeron N5105 processor and multiple 2.5GbE LAN ports.

Сураныч, туура орнотуу жана оптималдуу иштеши үчүн аппаратты колдонуудан мурун бул колдонмону кылдат окуп чыгыңыз.

Коопсуздук маалыматы

• Ensure the device is placed on a stable, flat surface with adequate ventilation.
• Use only the provided power supply. Using an incorrect power supply may damage the device and void the warranty.
• Аппаратты сууга, нымдуулукка же экстремалдык температурага тийгизбеңиз.
• Avoid opening the chassis unless performing authorized upgrades (RAM, SSD/HDD, WiFi module). Disconnecting internal components improperly can cause damage.
• In case of malfunction, disconnect the power supply and contact support. Do not attempt repairs yourself.

Пакеттин мазмуну

Пакетте бардык буюмдар бар экенин текшериңиз:

• HUNSN RJ03 Firewall Appliance
• Power Supply (DC12V3A)
• Электр кабели
• Кепилдик картасы

Продукт бүттүview

The HUNSN RJ03 is a compact, fanless mini PC designed for robust network applications. Its aluminum chassis acts as a heatsink, ensuring silent operation.

Front Panel

1-сүрөт: Front Panel Layout

The front panel provides essential user interfaces:

• Power ON/OFF баскычы: Used to power the device on or off.
• CLR CMOS Button: A small button to clear CMOS settings, often requiring a pin to press.
• USB 3.0 порттору (2x): Жогорку ылдамдыктагы USB түзмөктөрүн туташтыруу үчүн.
• Тип-C Port: Supports display output and USB connectivity.
• TF карта уячасы: For TransFlash (MicroSD) memory cards.
• Antenna Connectors (2x): For optional WiFi antennas.

Арткы панель

2-сүрөт: Арткы панелдин макети

The rear panel houses the primary connectivity options:

• USB 2.0 порттору (2x): Стандарттык USB түзмөктөрүн туташтыруу үчүн.
• HDMI порту: Дисплейге туташуу үчүн.
• DisplayPort (DP): Дисплейге туташуу үчүн.
• LAN Ports (4x 2.5GbE I226-V): Four 2.5 Gigabit Ethernet ports for network connections (ETH0, ETH1, ETH2, ETH3).
• DC_IN Port: For connecting the 12V power adapter.

Орнотуу нускамалары

1. Hardware Installation (Optional)

If you purchased a barebones unit or wish to upgrade, follow these steps to install RAM, SSD/HDD, or a WiFi module. Ensure the device is powered off and disconnected from the power source before proceeding.

1. Шассиди ачыңыз: Carefully remove the screws securing the bottom panel of the appliance.
2. RAM орнотуу: The device supports 2 x SODIMM DDR4 2933MHz, up to 32GB. Insert the RAM modules into the SODIMM slots, ensuring they are seated correctly and the clips lock them in place.
3. Install Storage:
   • M.2 NVMe SSD: Insert the M.2 2280 PCIe 3.0 x1 NVMe SSD into its dedicated slot and secure it with the provided screw.
   • 2.5 Inch SATA SSD/HDD: Connect a 2.5-inch SATA SSD or HDD using the internal SATA data and power cables (if included). Secure the drive within the chassis.
4. Install M.2 WiFi Module (Optional): If installing a WiFi 6 module, insert it into the M.2 WiFi slot and connect the antenna cables.
5. Шассиди жабуу: Replace the bottom panel and secure it with the screws.

2. Перифериялык түзүлүштөрдү туташтыруу

1. Кубат туташуу: Connect the provided power adapter to the DC_IN port on the rear panel, then plug the power cord into an electrical outlet.
2. Тармак туташуусу: Connect your network cables to the 2.5GbE LAN ports (ETH0-ETH3) as required for your network configuration (e.g., WAN, LAN, DMZ).
3. Display and Input (Optional): For initial setup or direct interaction, connect a monitor via HDMI or DisplayPort, and a keyboard/mouse to the USB ports.

3. Баштапкы жүктөө

Press the Power ON/OFF button on the front panel. The device should power on. If a display is connected, you will see the boot sequence.

Операциялык системаны орнотуу

The HUNSN RJ03 supports a variety of operating systems and network appliance software. It supports UEFI boot only.

• Бири-бирине шайкеш системасы: 5.10.x and above core-based FreeBSD router systems, Linux distributions, or Windows operating systems.
• Firewall Software: Compatible with popular open-source solutions such as pfSense and OPNsense.
• Орнотуу процесси:
  1. Prepare a bootable USB drive with your chosen operating system or firewall software.
  2. Connect the USB drive to a USB port on the RJ03.
  3. Power on the device and enter the BIOS/UEFI setup (usually by pressing DEL or F2 during boot) to configure the boot order, prioritizing the USB drive.
  4. Операциялык тутумду орнотуу үчүн экрандын көрсөтмөлөрүн аткарыңыз.
• Network Driver Considerations: The Intel I226-V 2.5GbE LAN ports may require specific drivers or a newer kernel version for optimal performance, especially with certain older operating systems or firewall distributions (e.g., older pfSense versions). Ensure your chosen OS version supports these NICs or be prepared to install necessary drivers.

Операция

Once the operating system is installed and configured, the HUNSN RJ03 functions as a reliable network appliance. Specific operation details will depend on the software installed (e.g., OPNsense, pfSense).

• Энергияны башкаруу: The device supports hardware auto power-on (enabled by default), network wake-up (Wake-on-LAN), and system power management features. These can typically be configured in the BIOS/UEFI settings.
• желдеткичсиз дизайн: The fanless design ensures silent operation (0.00dB noise). The aluminum chassis acts as a large heatsink, dissipating heat efficiently.
• Температураны башкаруу: The device is designed to operate within a temperature range of 0°C to 70°C. While the chassis may feel warm to the touch, this is normal for fanless systems and indicates effective heat dissipation.

Техникалык тейлөө

• Тазалоо: Periodically clean the exterior of the device with a soft, dry cloth. Do not use liquid cleaners or aerosols. Ensure ventilation fins are free from dust accumulation to maintain optimal cooling.
• Муздатуу: Although fanless, ensure the device has adequate airflow around its chassis. Avoid placing it in enclosed spaces without ventilation. If operating in consistently high ambient temperatures or under heavy load, consider adding an external USB fan for additional cooling, especially if system temperatures are a concern.
• Программалык камсыздоонун жаңыртуулары: Check the HUNSN support website or contact customer service for any available BIOS/UEFI firmware updates, which may improve compatibility or performance.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

Your HUNSN RJ03 appliance comes with a warranty. Please refer to the included warranty card for specific terms and conditions. For technical support, troubleshooting assistance, or inquiries regarding parts and upgrades, please contact HUNSN customer service through the retailer where you purchased the product or visit the official HUNSN store online.

Кошумча ресурстарды жана продукт маалыматын алуу үчүн, сиз иш сапары менен болот HUNSN Store on Amazon.