Southwire 150W Prefab LED үстүнкү фонар T90150 Колдонуучунун колдонмосу

Introduction

The Southwire T90150 Prefab LED Overhead Lantern is designed for robust illumination in various environments. It features a custom wiring terminal for flexible power cord integration and includes strain relief connectors. The unit also incorporates ½” threaded hubs compatible with other Southwire fittings. A retractable handle facilitates ceiling mounting and allows for low-profile тизүү.

1-сүрөт: Southwire 150W Prefab LED Overhead Lantern. This image displays the complete lantern unit, highlighting its robust construction, retractable handle, and the LED light array protected by a metal cage.

Коопсуздук маалыматы

Орнотуудан жана иштетүүдөн мурун бардык көрсөтмөлөрдү кунт коюп окуп чыгыңыз. Бул көрсөтмөлөрдү аткарбоо электр тогуна урунууга, өрткө же олуттуу жаракат алууга алып келиши мүмкүн.

• Электр коркунучу: Ensure power is disconnected before wiring or servicing the unit. All wiring must comply with national and local electrical codes.
• Кесиптик орнотуу: Орнотуу квалификациялуу электрик тарабынан аткарылышы керек.
• Туура Жерге салуу: The fixture must be properly grounded to prevent electrical shock.
• Тtage Шайкештик: камсыз кылуу том экенин текшериңизtage matches the fixture's requirements (120V - 227VAC).
• Көзгө түз тийүүдөн сактаныңыз: The LED light is extremely bright. Avoid looking directly into the light source to prevent eye strain or temporary vision impairment.
• Иштөө температурасы: Do not operate the fixture in environments exceeding its specified temperature range.
• Коопсуз орнотуу: Ensure the fixture is securely mounted to prevent it from falling.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• Southwire 150W Prefab LED Overhead Lantern (Model T90150)
• Steel strain relief connectors (2x)
• User Manual
• Note: Power cord is not included and must be supplied by the user.

Орнотуу жана орнотуу

This fixture requires user-supplied wiring for power. Follow these steps for safe and proper installation:

1. Зымдарды даярдоо: Obtain a suitable power cord (12 gauge through 16 gauge SO Cord recommended) and, if desired, a female three-prong plug for daisy-chaining multiple lights. Cut and strip the wires as necessary.
2. Access Wiring Terminal: Unscrew the top section of the lantern to expose the internal wiring terminal.
3. Кубат кабелин туташтыруу:
   • Feed the power cord through one of the ½” threaded hubs.
   • Connect the stripped wires to the appropriate terminals within the fixture (Line, Neutral, Ground). Ensure connections are secure.
   • Use the provided steel strain relief connector to secure the power cord where it enters the fixture, preventing accidental dislodgement.
4. Ромашка чынжырын токуу (милдеттүү эмес): If connecting multiple lights, feed the female three-prong plug wiring through the second ½” threaded hub and connect it to the designated output terminals. Secure with a strain relief connector.
5. Secure Top Section: Carefully re-attach and screw the top section of the lantern back into place, ensuring no wires are pinched.
6. Монтаждоо: Use the retractable hanging clip/handle to securely mount the lantern overhead. Ensure the mounting point can support the fixture's weight (approximately 10.03 pounds).

Маанилүү: The fixture does not include an on/off switch. Power control must be managed externally (e.g., via a wall switch or by plugging/unplugging the power cord).

Иштөө нускамалары

The Southwire Prefab LED Overhead Lantern is designed for straightforward operation once installed.

1. Күйгүзүү: Connect the power cord to a compatible 120V - 227VAC power source. The light will illuminate.
2. Өчүрүү: Disconnect the power cord from the power source or use an external switch to cut power to the fixture.
3. Караңгылатуу функциясы: Some models may feature a switch to toggle between 100% and 50% output. Refer to your specific model's labeling for this feature.

Эскертүү: This lantern is extremely bright. Position it to avoid direct eye contact, especially when operating at full brightness.

Техникалык тейлөө

The Southwire LED Overhead Lantern requires minimal maintenance to ensure optimal performance and longevity.

• Тазалоо: Тазалоодон мурун электрди өчүрүңүз. жумшак колдонуу, damp Аспаптын сыртын сүртүү үчүн чүпүрөк колдонуңуз. Абразивдүү тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Текшерүү: Periodically inspect the power cord and connections for any signs of wear, damage, or loose connections. Address any issues immediately.
• Сактагыч: When not in use, store the lantern in a dry, protected area. The retractable handle allows for low-profile тизүү.
• Диоддордон: The LED light source is designed for long life and is not user-serviceable. Do not attempt to replace individual LEDs.

Проблемаларды чечүү

If you encounter issues with your Southwire LED Overhead Lantern, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Southwire customer support.

Техникалык шарттар

Кепилдик жана колдоо

This Southwire product is covered by a 1 жылдык Чектелген Кепилдик сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.

For warranty claims, technical support, or further assistance, please contact Southwire customer service. Refer to the official Southwire webакыркы байланыш маалыматы үчүн сайт.

Southwire Official Webсайт: www.southwire.com