XtremepowerUS 13-inch Sand Filter Pump (Model 75159-2) Instruction Manual

1. Introduction and Overview

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your XtremepowerUS 13-inch Sand Filter Pump, Model 75159-2. This system is designed for above-ground swimming pools, offering reliable filtration to keep your pool water clean and clear. It features a 3/4HP pump with a 2640 GPH flow rate and a digital timer function for automated operation.

Image 1.1: The XtremepowerUS 13-inch Sand Filter Pump in operation next to an above-ground pool.

2. Коопсуздук маалыматы

WARNING: Read and understand all instructions before installing or operating this product. Failure to follow these instructions can result in serious injury or property damage.

• Кандайдыр бир тейлөөнү же тейлөөнү аткаруудан мурун ар дайым электр кубатын ажыратыңыз.
• Ensure the pump is installed on a solid, level surface, away from the pool edge to prevent accidental submersion.
• Электр шнур же сайгыч бузулуп калса, насосту иштетпеңиз.
• Keep children and pets away from the pump and filter system during operation.
• Бул шайман физикалык, сезүү же акыл-эс жөндөмү начар же тажрыйбасы жана билими жок адамдар (анын ичинде балдар) үчүн, эгерде алардын коопсуздугуна жооптуу адам тарабынан көзөмөлсүз же шайманды колдонуу боюнча көрсөтмө болбосо, колдонууга арналбайт.

3. Продукциянын өзгөчөлүктөрү

• Sizable Capacity: Housed in a one-piece 13-inch tank, this filter accommodates up to 42 pounds of sand, suitable for above-ground pools up to 10,000 gallons.
• Ишенимдүү аткаруу: Designed to maintain optimal sand height, ensuring maximum water exposure to the sand surface for superior filtration, consistent performance, and efficient backwashing.
• Жөнөкөй жана колдонууга оңой: Features a 4-way valve, 3-prong plug with an electric cable, and a portable design. Installation typically takes less than 5 minutes. The integrated controller is programmable for 2 to 24 hours of operation.
• Төмөн ызы-чуу Дизайн: Engineered for quiet operation, enhancing comfort and energy efficiency.
• Multi-Port Filter: The multi-port valve provides various functions for easy use and quick back-washing.

Image 3.1: Multi-Port Valve System functions.

Image 3.2: Superior Filtration Rate of 2400 GPH.

Image 3.3: Sizable Sand Capacity for pools up to 10,000 gallons.

4. Орнотуу жана орнотуу

1. Жайгашкан жери: Position the sand filter pump on a firm, level surface near your above-ground pool. Ensure it is easily accessible for maintenance and protected from direct weather exposure if possible.
2. Adding Filter Media: Carefully add the recommended amount of filter sand (42 lbs) or filter balls into the tank. Ensure the standpipe is centered during this process to prevent sand from entering it.
3. Туташтыруучу шлангдар: Connect the pool's skimmer/intake hose to the pump's inlet and the pump's outlet to the filter tank's inlet. Connect the filter tank's return outlet to the pool's return jet. Secure all connections with clamps to prevent leaks. The system includes 1.25"/1.5" NPSM threaded connections.
4. Насосту толтуруу: Before starting, ensure the pump is primed by filling the pump basket with water until it overflows. Secure the lid.
5. Электр байланышы: Plug the 3-prong power cable into a grounded electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI).

5. Иштөө нускамалары

The XtremepowerUS Sand Filter Pump features a multi-port valve with several settings and an integrated digital timer for convenient operation.

5.1 Multi-Port Valve Settings

The 4-way valve allows you to select different operational modes. Always turn off the pump before changing the valve position.

• Чыпка: This is the standard operating mode for daily filtration. Water is pumped through the sand bed, filtered, and returned to the pool.
• АРТКА ЖУУ: Used to clean the filter media. Water flow is reversed, flushing accumulated debris out through the waste port.
• ЖУУ: Used after backwashing to flush any remaining debris from the filter lines before returning to FILTER mode.
• КАЛДЫКТАР: Drains water directly from the pool, bypassing the filter. Useful for lowering pool water level or vacuuming heavy debris directly to waste.
• RE-CIRCULATE: Circulates pool water without passing it through the filter. Useful for distributing chemicals without filtering.
• ЖАБЫК: Stops water flow completely. Use this setting when performing maintenance on the pump or filter.
• КЫШ: Prepares the system for winter storage.

5.2 Digital Timer Function

The integrated digital timer allows you to program the pump's run time for automated operation, ensuring consistent filtration.

Image 5.1: Smart Timer Control panel.

Use the 'TIMES' button to select the desired operating duration (e.g., 2h, 4h, 6h, up to 24h). The pump will run for the selected duration and then automatically shut off. Press 'ON/OFF' to manually start or stop the pump.

6. Техникалык тейлөө

Regular maintenance ensures the longevity and optimal performance of your sand filter pump.

6.1 Чыпканы кайра жуу

Backwashing is crucial for cleaning the filter sand. Perform backwashing when the pressure gauge reads 8-10 PSI above its clean starting pressure, or when pool water flow is noticeably reduced.

1. Насосту өчүрүңүз.
2. Set the multi-port valve to 'BACKWASH'.
3. Насосту күйгүзүп, агынды суу түтүгүнөн агып чыккан суу тунук болгонго чейин (адатта 2-3 мүнөт) иштетиңиз.
4. Насосту өчүрүңүз.
5. Set the multi-port valve to 'RINSE'.
6. Насосту күйгүзүп, 30-60 секунд иштетиңиз.
7. Насосту өчүрүңүз.
8. Set the multi-port valve back to 'FILTER'.
9. Кадимки чыпкалоону калыбына келтирүү үчүн насосту күйгүзүңүз.

6.2 Cleaning the Pump Basket

The pump's pre-filter basket collects larger debris before it reaches the filter. Check and clean it regularly.

1. Насосту өчүрүп, электр розеткасынан ажыратыңыз.
2. Бассейнден суунун агып кетишине жол бербөө үчүн бардык зарыл болгон клапандарды жабыңыз.
3. Remove the transparent lid of the pump basket.
4. Remove and empty the basket. Rinse it thoroughly.
5. Inspect the O-ring on the lid for damage and ensure it is clean. Lubricate if necessary.
6. Replace the basket and secure the lid tightly.
7. Restore power and open valves before restarting the pump.

6.3 Кышка даярдык

Before freezing temperatures arrive, prepare your pump and filter for winter storage.

1. Perform a final backwash and rinse.
2. Насосту өчүрүп, электр розеткасынан ажыратыңыз.
3. Drain all water from the pump, filter tank, and hoses. Remove drain plugs.
4. Disconnect all hoses and store them in a dry, protected area.
5. Remove the pressure gauge and store it indoors.
6. Store the pump and filter tank in a dry, frost-free location.

7. Кыйынчылыктарды

If you encounter issues with your sand filter pump, refer to the following common problems and solutions:

• Төмөн суунун агымы:
  • Check the pump basket for debris and clean if necessary.
  • Ensure all valves are fully open and hoses are not kinked.
  • Check the pressure gauge; if high, backwash the filter.
  • Verify the water level in the pool is adequate for proper skimming.
• Булуттуу бассейндин суусу:
  • Чыпканы артка жуу.
  • Check pool chemical balance (pH, chlorine).
  • Ensure the pump is running for sufficient duration daily.
  • Consider adding a clarifier or flocculant if needed.
• Насос иштебей жатат:
  • Check power connection and GFCI breaker.
  • Ensure the timer is set correctly or press the ON/OFF button.
  • Inspect for any obstructions in the impeller.
• Агышуулар:
  • Бардык шланг clampлар жана байланыштар.
  • Inspect O-rings and gaskets for damage and replace if necessary.

For persistent issues, contact XtremepowerUS customer support.

8. Техникалык шарттар

Image 8.1: Product dimensions and compact design.

9. Кепилдик жана колдоо

For warranty information, product support, or to purchase replacement parts, please contact XtremepowerUS customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Manufacturer: XtremepowerUS