Lionelo Antoon Plus ADAC Car Seat Instruction Manual

1. Introduction and Overview

The Lionelo Antoon Plus ADAC Car Seat is designed to provide maximum safety and comfort for children from birth up to approximately 4 years old (40 cm to 105 cm in height, or up to 18 kg in weight). This car seat features a robust ISOFIX installation system with a support leg, a 360-degree swivel base for easy access, and a 5-point safety harness. It has undergone rigorous testing by the independent German research institute ADAC and holds i-Size homologation, ensuring compliance with the highest safety standards.

Image 1: The Lionelo Antoon Plus ADAC Car Seat, showcasing its robust design and integrated safety features.

2. Коопсуздук маалыматы

Always read and follow all instructions in this manual carefully before installing and using the car seat. Improper installation or use can lead to serious injury or death. Ensure the car seat is appropriate for your child's weight and height. Never leave your child unattended in the car seat.

• i-Size Homologation: Certified according to ECE R129/03 standard, ensuring enhanced safety performance.
• ADAC Certified: Independently tested by ADAC, receiving a 4-star safety rating.
• 5 чекиттүү коопсуздук куру: Keeps the child securely fastened in the seat.
• Каптал соккудан коргоо (SIP): Reinforced side panels and headrest absorb impact forces.
• ISOFIX System with Support Leg: Унаага туруктуу жана ишенимдүү орнотууну камсыз кылат.

3. Продукциянын өзгөчөлүктөрү

• Dri-Seat System: A special insert that ensures proper air circulation, keeping the child comfortable.
• Жөнгө салынуучу баштык: 10-step height adjustment with integrated safety belt adjustment. Features Memory Foam for enhanced comfort and impact absorption.
• 360 градустук айлануучу негиз: Allows for easy rotation of the seat, facilitating child placement and switching between rear-facing and forward-facing positions without reinstallation.
• 5-Point Safety Belts: Equipped with a Holmbergs buckle for secure fastening.
• Side Protection System (SIP): Advanced side reinforcements protect the child's head and torso in the event of a side collision.
• Жөндөлүүчү жөлөкпул: 5 recline positions (4 forward-facing, 1 rear-facing) for optimal comfort during travel.
• Reduction Inserts: A set of removable reduction inserts ensures proper positioning for smaller passengers.

Image 2: Features of the Antoon Plus car seat, including the Dri-Seat system and comfortable padding.

Image 3: Close-up of the 5-point safety belts and Holmbergs buckle on the Lionelo Antoon Plus car seat.

Video 2: Lionelo Antoon Plus Features Overview. This video highlights the key features of the Antoon Plus car seat.

4. Орнотуу

4.1. Rear-Facing Installation (40-105 cm, up to 18 kg)

1. Place the car seat on the vehicle seat, ensuring it is as close as possible to the seat back.
2. Rotate the seat to the rear-facing position.
3. Adjust the recline to the fifth position (rear-facing).
4. Extend the ISOFIX arms and attach them to the vehicle's ISOFIX anchor points. Ensure the green indicator is visible on both sides.
5. Push the car seat firmly against the vehicle seat back, ensuring the anti-rotation frame is pressed against the backrest.
6. Extend the support leg until it firmly contacts the vehicle floor. Ensure the green indicator on the support leg is visible.
7. Rotate the seat to face the rear of the vehicle.

4.2. Forward-Facing Installation (76-105 cm)

1. Place the car seat on the vehicle seat, ensuring it is as close as possible to the seat back.
2. Rotate the seat to the forward-facing position.
3. Adjust the recline to one of the four forward-facing positions.
4. Extend the ISOFIX arms and attach them to the vehicle's ISOFIX anchor points. Ensure the green indicator is visible on both sides.
5. Push the car seat firmly against the vehicle seat back, ensuring the anti-rotation frame is pressed against the backrest.
6. Extend the support leg until it firmly contacts the vehicle floor. Ensure the green indicator on the support leg is visible.
7. Rotate the seat to face the front of the vehicle.

5. Тууралоо

5.1. Баш таянгычты жана жабдыкты жөндөө

The headrest and 5-point safety harness are adjusted simultaneously. To adjust, locate the headrest adjustment lever (usually at the top rear of the headrest). Squeeze the lever and move the headrest up or down to the desired position. Ensure the harness straps are at or slightly below the child's shoulders for rear-facing, and at or slightly above for forward-facing.

5.2. Recline Adjustment

The car seat offers 5 recline positions. To adjust, locate the recline adjustment handle (usually at the front base of the seat). Pull the handle and tilt the seat to the desired recline angle. Ensure the chosen recline position is appropriate for your child's age and the direction of travel (rear-facing or forward-facing).

6. Техникалык тейлөө

6.1. Каптаманы тазалоо

The car seat upholstery is removable for cleaning. Follow these steps:

1. Remove the reduction insert and headrest cover.
2. Unfasten all elastic loops and clips securing the main upholstery to the seat shell.
3. Carefully pull the upholstery off the seat.
4. Wash the upholstery according to the care label instructions (typically hand wash or gentle cycle with mild detergent). Do not tumble dry.
5. Reattach the clean, dry upholstery in reverse order.

6.2. Storing the Harness

When the 5-point harness is no longer needed (e.g., when using the vehicle's 3-point belt for older children), it can be stored within the seat. Locate the harness storage compartment and follow the instructions in the manual to detach and store the harness components. Ensure all parts are securely stored to prevent loss or damage.

7. Кыйынчылыктарды

If you encounter any issues with your Lionelo Antoon Plus car seat, please refer to the detailed troubleshooting section in the full product manual. Common issues often relate to installation, harness adjustment, or recline mechanism. Always ensure all indicators (ISOFIX, support leg) are green for correct installation.

If problems persist, contact Lionelo customer support for assistance.

8. Техникалык шарттар

Image 4: Technical drawing illustrating the dimensions of the Lionelo Antoon Plus car seat.

9. Кепилдик жана колдоо

The Lionelo Antoon Plus car seat comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Lionelo website. For technical support, spare parts, or any other inquiries, please contact Lionelo customer service directly.

Байланыш маалыматы: Please refer to the contact details provided in your product packaging or on the official Lionelo webсайт.