Veepeak 1220 12V Car Battery Tester User Manual

1. Киришүү

The Veepeak 1220 12V Car Battery Tester is a versatile diagnostic tool designed to assess the health of 12V lead-acid batteries and their associated charging and cranking systems. It provides quick and accurate readings for various battery types, helping users determine if a battery is in good condition, needs recharging, or requires replacement. This manual provides detailed instructions for the proper use and maintenance of your Veepeak 1220 Battery Tester.

2. Продукт бүтүп калдыview

1-сүрөт: Veepeak 1220 12V Car Battery Tester. This image shows the compact red device with its display screen, navigation buttons (ESC, OK, up, down), and attached red and black battery clamps.

2.1 Кутуда эмне бар

• Battery tester with clamps and cord
• Колдонуучунун Колдонмосу (бул документ)

2.2 Негизги өзгөчөлүктөрү

• Батареянын ден соолугун текшерүү: Scans and displays the overall status of a 12V auto battery, including State of Charge (SOC), State of Health (SOH), voltage, internal resistance, and Cold Cranking Amps (CCA).
• Alternator & Starting System Tester: Reads ripple, loaded, and unloaded voltage to assess alternator performance and checks cranking voltage and time for starting capability.
• Plug and Play & High Accuracy: Tests batteries (even dead ones) in-vehicle or out-of-vehicle with high accuracy (close to 0.01V with overall accuracy close to 99.9%).
• Кеңири шайкештик: Compatible with all 12V lead-acid batteries from 100 to 2000 CCA (Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB).
• Коопсуздук өзгөчөлүктөрү: Includes polarity reverse protection and is spark-proof with no heat connection.

3. Орнотуу

Before using the Veepeak 1220 Battery Tester, ensure the battery terminals are clean and free of corrosion for accurate readings.

1. Identify the positive (+) and negative (-) terminals on the 12V battery.
2. кызыл cl туташтырууamp сыноочуну оң (+) батарея терминалына туташтырыңыз.
3. Кара cl туташтырыңызamp сыноочуну батареянын терс (-) терминалына туташтырыңыз.
4. The tester will automatically power on once connected. The main menu will appear on the screen.

Эскертүү: The device features polarity reverse protection, meaning it will not be damaged if the clamps are connected incorrectly. However, always strive for correct connection for safety and proper operation.

4. Иштөө нускамалары

Navigate the menu using the Up/Down arrow buttons and confirm selections with the OK button. Use the ESC button to go back to the previous screen.

4.1 Батарея сыноо

This test assesses the overall health of your battery.

2-сүрөт: Multi-Functional 12V Battery Analyzer. The screen displays options for Battery Test, Cranking Test, and Charging Test.

1. From the Main Menu, select "1. Battery Test" and press OK.
2. Select the appropriate battery type (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB) and press OK.
   

   3-сүрөт: Compatible Battery Types selection screen.

3. Муздак иштетүүнү киргизиңиз Amps (CCA) rating of your battery. This information is usually found on the battery label. Use the Up/Down arrows to adjust the value and OK to confirm.
4. The tester will perform the test and display the results, including SOH, SOC, internal resistance, and voltage. It will also indicate if the battery is "GOOD BATTERY", "RECHARGE", or "REPLACE".

4.2 Кранкинг сыноо

This test evaluates the battery's ability to start the engine.

4-сүрөт: Cranking Test in progress. The screen shows cranking time and voltage.

1. From the Main Menu, select "2. Cranking Test" and press OK.
2. The screen will prompt "Start Engine".
3. Унаанын моторун иштетиңиз.
4. The tester will automatically detect the cranking event and display the cranking time and voltage. It will indicate if the cranking is "GOOD" or "LOW".

4.3 Заряддоо тутумун сыноо

This test checks the alternator and the vehicle's charging system.

5-сүрөт: Charging System Test screen showing loaded, unloaded voltage, жана толкун.

1. From the Main Menu, select "3. Charging Test" and press OK.
2. The screen will prompt for a "Ripple Test". Press OK.
3. The screen will then prompt "Increase RPM to 2500 R/min and keep it 5 seconds. Press OK to continue."
4. With the engine running, increase the engine RPM to approximately 2500 for 5 seconds. It is recommended to have a second person assist with this step.
5. Press OK. The tester will display the loaded voltagд, түшүрүлгөн томtage, and ripple. It will indicate if the charging is "HIGH", "NORMAL", or "LOW".

5. Техникалык тейлөө

• Keep the tester clean and dry. Wipe it with a soft, damp зарыл болсо, кездеме.
• Сыноочуну күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Кабелдерди дайыма текшерип туруңуз жана clamps for any signs of damage or wear. Replace if necessary.
• Ensure the battery terminals are clean before testing to prevent inaccurate readings.

6. Кыйынчылыктарды

7. Техникалык шарттар

• Продукциянын өлчөмдөрү: 5.06 x 2.85 x 0.87 дюйм
• Элемент Салмагы: 10.23 унция
• Кубат булагы: Battery Powered (from tested battery)
• Мин. Operating Voltage: 12 вольт
• CCA диапазону: 100-2000 CCA
• Шайкеш батареянын түрлөрү: Кадимки суу каптаган, AGM жалпак пластинасы, AGM спиралы, гель, EFB
• Өндүрүүчү: Veepeak

8. Кепилдик жана колдоо

The Veepeak 1220 12V Car Battery Tester comes with a one-year hassle-free replacement warranty.

For technical support, troubleshooting assistance, or warranty claims, please contact Veepeak customer service through their official webпродукт сатылып алынган сайт же сатуучу.

Сураныч, кепилдик максаттары үчүн сатып алганыңыздын далилин сактап коюңуз.