ID-COOLING IS-47-XT Low Profile CPU Cooler Колдонуучунун колдонмосу

Introduction

The ID-COOLING IS-47-XT is a compact, low-profile CPU cooler designed for systems with limited space, such as Home Theater Personal Computers (HTPCs), Mini-ITX builds, and other Small Form Factor (SFF) cases. With a total height of only 47mm, it provides efficient cooling performance while maintaining excellent compatibility with various components, including RAM modules. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your cooler.

Image: The ID-COOLING IS-47-XT low profile CPU cooler, showcasing анын компакттуу дизайны.

Продукт бүттүview

Негизги өзгөчөлүктөрү

• Ультра компакт дизайн: Only 47mm total height, ideal for HTPCs, ITX, and SFF builds.
• Натыйжалуу жылуулук диссипациясы: Features a copper base and 4 heat pipes for excellent heat transfer from the CPU.
• PWM желдеткич: Equipped with a 92x92x15mm PWM fan for automatic speed control, low noise operation, and a maximum airflow of 46 CFM.
• RAM Compatibility: Small size ensures excellent memory compatibility, even on Mini-ITX motherboards.
• Кеңири шайкештик: Supports Intel LGA1700/1200/1151/1150/1155/1156 sockets. AMD AM5/AM4 sockets require extra brackets (sold separately).
• All-Black Design: Эстетикалык жактанasing all-black finish.

Компоненттер камтылган

The ID-COOLING IS-47-XT package includes the following components:

• Heatsink assembly with integrated 92x92x15mm PWM fan
• Mounting hardware kit for Intel sockets
• Термикалык паста шприц

Image: All included mounting hardware and thermal paste for the IS-47-XT cooler.

Орнотуу жана орнотуу

Follow these steps carefully to install your ID-COOLING IS-47-XT CPU cooler. Ensure your system is powered off and unplugged before beginning installation.

1. Энелик платаны даярдаңыз

• Place the appropriate backplate (if required for your socket type) on the rear of the motherboard, aligning the holes with the CPU socket mounting holes.
• Insert the standoffs through the mounting holes from the front side of the motherboard, securing them to the backplate.

2. Термикалык пастаны сүйкөңүз

• Clean the surface of your CPU and the cooler's copper base with isopropyl alcohol to remove any dust or residue.
• Apply a small, pea-sized amount of the included thermal paste to the center of the CPU's Integrated Heat Spreader (IHS). Do not spread it; the pressure from the cooler will distribute it evenly.

Image: Diagram illustrating the copper base and heat pipes for efficient heat transfer from the CPU.

3. Mount the Cooler

• Carefully place the IS-47-XT cooler onto the CPU, aligning the mounting holes on the cooler's bracket with the standoffs on the motherboard.
• Secure the cooler using the provided screws. Tighten them in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) until snug. Do not overtighten.
• Connect the 4-pin PWM fan cable from the cooler to the CPU_FAN header on your motherboard.

Image: The IS-47-XT cooler installed on a motherboard, demonstrating its excellent RAM compatibility due to its compact design.

Орнотуу

The IS-47-XT cooler can be mounted in two different orientations to optimize airflow within your case, depending on your system's configuration. Consider the direction of your case fans to ensure the cooler's fan is assisting the overall airflow.

Image: Illustration showing two possible mounting orientations for the cooler to best fit the system's airflow.

Иштөө нускамалары

Once installed, the ID-COOLING IS-47-XT operates automatically to maintain optimal CPU temperatures.

PWM Fan Control

The 92x92x15mm fan is a Pulse Width Modulation (PWM) fan. This means its speed is automatically controlled by your motherboard based on the CPU's temperature. This dynamic control ensures efficient cooling when needed and quiet operation during lighter loads.

Image: Close-up of the fan, highlighting its design for low-noise operation.

Airflow and Performance

The fan is designed to push air down through the heatsink fins, effectively dissipating heat from the copper base and heat pipes. This strong airflow and air pressure ensure that heat is quickly removed from the CPU, maintaining stable operating temperatures.

Image: Diagram illustrating the strong airflow and air pressure generated by the fan for effective cooling.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө CPU муздаткычыңыздын узак иштөөсүн жана оптималдуу иштешин камсыз кылууга жардам берет.

Чаңды тазалоо

• Periodically inspect the heatsink fins and fan blades for dust accumulation.
• Use compressed air to blow dust out of the heatsink fins. Hold the fan blades gently to prevent them from spinning excessively during cleaning, which can damage the fan bearings.
• For stubborn dust, a soft brush or cotton swab can be used carefully.

Термикалык пастаны кайра колдонуу

While modern thermal pastes have a long lifespan, reapplication may be beneficial after several years or if you notice a significant increase in CPU temperatures. This involves carefully removing the cooler, cleaning off old thermal paste from both the CPU and cooler base, and applying new thermal paste before re-mounting.

Проблемаларды чечүү

If you encounter issues with your ID-COOLING IS-47-XT cooler, refer to the following common problems and solutions.

Жогорку CPU Температуралары

• Check Mounting Pressure: Ensure the cooler is securely mounted and evenly tightened. Uneven pressure can lead to poor contact with the CPU.
• Verify Thermal Paste Application: Confirm that thermal paste was applied correctly and is evenly spread between the CPU and cooler base. Reapply if necessary.
• Желдетүүчүнүн иштешин текшерүү: Ensure the fan is spinning freely and connected to the CPU_FAN header. Check for any obstructions.
• Иштин аба агымы: Poor case ventilation can trap heat. Ensure your PC case has adequate intake and exhaust fans.
• CPU Power Consumption: This cooler is designed for CPUs with lower thermal design power (TDP). For optimal performance, it is recommended for CPUs with a TDP of 65W or lower. CPUs with higher power consumption (e.g., 90W or above) may experience higher temperatures, especially under heavy load.

Ашыкча желдеткич ызы-чуу

• Чаң топтоо: Clean the fan blades and heatsink fins as described in the Maintenance section.
• Желдетүүчү ылдамдык орнотуулары: Check your motherboard's BIOS/UEFI settings for fan control. Adjust the fan curve to a quieter profile if temperatures allow.
• Тоскоолдуктар: Желдеткичтин калактарына кабелдердин же башка компоненттердин тийбегенин текшериңиз.

Техникалык шарттар

Below are the detailed technical specifications for the ID-COOLING IS-47-XT CPU Cooler:

Кепилдик жана колдоо

For warranty information and technical support, please contact ID-COOLING directly or refer to their official webсайт. Ар кандай кепилдик дооматтары үчүн сатып алганыңыздын далилин сактаңыз.

You can visit the official ID-COOLING store for more information and contact details: ID-COOLING Store