Waveshare USB to CAN Adapter Model A Instruction Manual

1. Introduction and Overview

The Waveshare USB to CAN Adapter Model A is a versatile device designed for communication between a computer and a CAN bus network. It utilizes an STM32 chip solution, ensuring stable and reliable performance. This adapter supports both CAN2.0A (standard frame) and CAN2.0B (extended frame) protocols, with a configurable CAN baud rate ranging from 5Kbps to 1Mbps. It offers multiple working modes and data sending/receiving options, making it suitable for various applications including data acquisition, analysis, and monitoring of CAN bus networks. The device is compatible with multiple operating systems, including Windows and Linux.

2. Пакеттин мазмуну

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

Image: Package contents of the Waveshare USB to CAN Adapter Model A.

• USB-CAN-A Adapter (x1)
• USB Cable (~1.5m) (x1)
• Бурағыш (x1)

3. Негизги өзгөчөлүктөрү

The Waveshare USB to CAN Adapter Model A offers a robust set of features for efficient CAN bus communication:

Сүрөт: бүттүview of the Waveshare USB to CAN Adapter Model A and its features.

• Supports CAN2.0A (standard frame) and CAN2.0B (extended frame).
• CAN baud rate is configurable from 5Kbps to 1Mbps.
• Features 4 working modes: normal, loopback, silent, and silent loopback.
• Supports multiple CAN data sending modes: single frame, multiple frames, manually, regularly, and cyclic sending.
• Supports multiple CAN data receiving modes: configurable to receive data from a specific ID or automatically answer with configured data.
• Data can be saved in TXT or Excel formats.
• Includes CAN bus detection for status checking.
• Sending/receiving CAN data with time scale for sequential display.
• USB virtual COM port baud rate configurable from 9600 to 2000000bps (2000000bps by default).
• Working parameters can be set via configuration software or serial command and saved after power off.
• Adopts STM32 chip solution for stable and reliable communication.
• Onboard TVS (Transient Voltage Suppressor) to effectively suppress surge voltagд жана убактылуу спике томtage.
• Comes with master computer software for Windows system.
• Easy for secondary development by modifying sending and receiving commands.

4. Версияны жаңыртуу

The Waveshare USB to CAN Adapter Model A has undergone a design upgrade, transitioning from an open board design to a more robust, dedicated case. This enhancement improves durability and protection for the internal components.

Image: Visual comparison of the previous and current versions of the adapter.

5. Системанын шайкештиги

The adapter is designed for broad compatibility with various operating systems, facilitating integration into diverse development and testing environments.

Image: Demonstrates compatibility with Windows and Linux systems.

• Windows XP/7/8/10/11
• Linux Systems (e.g., Raspberry Pi OS, Ubuntu on Jetson Nano)

6. Primary Functions

The primary function of the USB to CAN Adapter Model A is to collect data from a CAN bus and transmit it to a PC via USB. This enables transceiver control, data analysis, acquisition, and monitoring of the CAN bus network.

Image: Diagram of the adapter's primary function in a CAN network.

7. CAN Baud Rate Configuration

The CAN baud rate of the adapter is highly flexible and can be configured to suit various application requirements, supporting a wide range of speeds for different CAN bus setups.

Image: Illustration of the configurable CAN baud rate range.

The CAN baud rate is configurable within the range of 5Kbps to 1Mbps.

8. Multiple Working Modes

The adapter supports four distinct working modes to cater to different testing and operational scenarios:

Image: Diagrams explaining the four operational modes.

• Кадимки режим: Standard CAN communication for sending and receiving data to and from the CAN bus.
• Кайталоо режими: Data sent to the CAN bus is internally looped back to the receiver. Useful for self-testing without affecting the external CAN bus.
• Үнсүз режим: The adapter can receive data normally but will not transmit any implicit bit reports. This mode is used for analyzing CAN bus activity without interfering with the network.
• Silent Loopback Mode: A combination of silent and loopback modes, used for 'warm self-testing' where the device can test its own transmission and reception capabilities without affecting the CAN bus network.

9. Interfaces Introduction

The adapter features several indicators and controls for easy operation and monitoring:

Image: Labeled diagram of the adapter's interfaces.

10. STM32 Chip Solution

The Waveshare USB to CAN Adapter Model A integrates the original STM32F103 chip, which is central to its stable and reliable communication capabilities. This microcontroller provides the processing power necessary for efficient CAN bus operations.

Сүрөт: деталдуу view of the STM32 chip on the adapter.

11. Контурдун өлчөмдөрү

Understanding the physical dimensions of the adapter is important for integration into various setups.

Image: Outline dimensions of the adapter.

The adapter measures approximately 78.52mm in length, 18.36mm in width (USB side), and 8.87mm in width (terminal side).

12. Орнотуу жана орнотуу

Follow these steps to set up your Waveshare USB to CAN Adapter Model A:

1. Драйверди орнотуу: Before connecting the adapter, install the necessary USB virtual COM port drivers on your computer. These drivers are typically available on the Waveshare product page or included with the software package.
2. Компьютерге туташуу: Plug the USB-CAN-A adapter into an available USB port on your computer (PC, Laptop, Raspberry Pi, Jetson Nano).
3. Күч көрсөткүчү: Verify that the PWR indicator on the adapter lights up red, indicating successful power connection.
4. CAN автобусунун туташуусу: Connect the CAN H, CAN L, and GND terminals of the adapter to your CAN bus network. Ensure correct polarity.
5. 120Ω Resistor: If your adapter is at either end of the CAN bus, enable the 120Ω termination resistor using the onboard switch. For mid-bus connections, disable the resistor.
6. Программанын конфигурациясы: Launch the provided master computer software (for Windows) or use serial commands (for Linux) to configure the CAN baud rate and other working parameters.
7. Сыноо байланышы: Initiate a test communication to ensure the adapter is correctly sending and receiving data on the CAN bus.

13. Иштөө нускамалары

Once the adapter is set up, you can begin operating it for CAN bus communication:

• Иштөө режимин тандаңыз: Choose the appropriate working mode (Normal, Loopback, Silent, Silent Loopback) based on your application requirements using the configuration software.
• Configure Baud Rate: Set the desired CAN baud rate within the 5Kbps-1Mbps range.
• Дайындарды жөнөтүү: Use the software to send CAN data frames. You can choose between single frame, multiple frames, manual, regular, or cyclic sending modes.
• Receive Data: Monitor incoming CAN data. Configure the receiving mode to filter by specific IDs or to automatically respond to configured data.
• Маалыматтарды каттоо: Save received CAN data to TXT or Excel files for later analysis.
• CAN Bus Detection: Utilize the CAN bus detection feature to check the status and health of the CAN network.
• Экинчи өнүгүү: For custom applications, modify the sending and receiving commands as needed.

14. Техникалык тейлөө

To ensure the longevity and optimal performance of your Waveshare USB to CAN Adapter Model A, follow these maintenance guidelines:

• Тазалыкты сактоо: Regularly clean the adapter with a soft, dry cloth. Avoid using harsh chemicals or solvents.
• Сактагыч: Store the adapter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity when not in use.
• Этияттык менен мамиле кылуу: Avoid dropping or subjecting the adapter to physical shocks.
• Кабелдик башкаруу: Ensure USB and CAN cables are not bent sharply or under excessive strain to prevent damage.
• Программалык камсыздоо жаңыртуулары: Periodically check the Waveshare website for updated drivers or software to ensure compatibility and access to the latest features.

15. Кыйынчылыктарды

If you encounter issues with your Waveshare USB to CAN Adapter Model A, refer to the following troubleshooting tips:

• Адаптер табылган жок:
  • Ensure USB cable is securely connected to both the adapter and the computer.
  • Verify that the PWR indicator on the adapter is lit.
  • Check if the USB virtual COM port drivers are correctly installed and recognized by your operating system. Try reinstalling them.
  • Test with a different USB port or computer.
• No CAN Communication:
  • Confirm that the CAN H, CAN L, and GND connections to the CAN bus are correct and secure.
  • Verify that the CAN baud rate configured in the software matches the baud rate of the CAN bus network.
  • Check the 120Ω termination resistor switch setting. It should be enabled if the adapter is at the end of the bus, and disabled otherwise.
  • Ensure the CAN bus itself is operational and other devices on the bus are functioning correctly.
  • Try different working modes (e.g., Loopback mode for self-testing).
• Data Corruption/Errors:
  • Check for electromagnetic interference (EMI) near the adapter or CAN bus cabling.
  • Ensure proper grounding of the CAN bus and the adapter.
  • Verify cable quality and length; excessively long or poor-quality cables can introduce errors.
  • Confirm that the CAN bus is properly terminated at both ends.
• Программалык камсыздоо маселелери:
  • Ensure you are using the latest version of the master computer software.
  • Программаны жана/же компьютериңизди өчүрүп күйгүзүңүз.
  • Consult the software's documentation or help files for specific error messages.

If these steps do not resolve the issue, please contact Waveshare technical support for further assistance.

16. Техникалык шарттар

Detailed technical specifications for the Waveshare USB to CAN Adapter Model A:

17. Кепилдик жана колдоо

Waveshare products are designed for reliability and performance. For specific warranty details, please refer to the official Waveshare website or the documentation included with your purchase. For technical assistance, support resources, and additional information, please visit the Waveshare support portal or contact their customer service team. Keep your purchase receipt for warranty claims.