1. Коопсуздук маалыматы
- Орнотуу учурунда ар дайым коргоочу көз айнек тагыныңыз.
- Айнек панелдерди өтө этияттык менен кармаңыз. Чыңалган айнек бекем, бирок четтерине тийсе, сынып кетиши мүмкүн.
- Ensure the installation area is clear of obstructions and debris.
- Оптималдуу коопсуздук жана натыйжалуулук үчүн кесипкөй орнотуу сунушталат.
- Do not use abrasive cleaners or tools that could scratch the glass or finish.
2. Пакеттин мазмуну
Before beginning installation, verify that all parts are present and undamaged. Refer to the parts diagram in your included manual for specific component identification.
- Tempered Glass Panel (1/4 inch clear)
- Wall Profiles (Matte Black)
- Door Handle (Matte Black)
- Water Retaining Strips (Bottom and Magnetic)
- Screws, Wall Plugs, and Screw Covers
- Installation Hardware (Hinges, etc.)
3. Керектүү куралдар
- Drill (with 6mm / 0.2362 inch drill bit for tile/masonry)
- Hammer
- Бурагыч (Филипс башы сунушталат)
- Өлчөө лентасы
- Деңгээл
- Карандаш же маркер
- Silicone Sealant (mold-resistant, waterproof)
- Caulking Gun
- Пайдалуу бычак
4. Орнотуу боюнча нускамалар
This section provides a step-by-step guide for installing your ELEGANT Pivot Shower Door. For a visual guide, please refer to the official installation video below.
Official ELEGANT Pivot Shower Door Installation Steps video. This video demonstrates the complete installation process for the FP series shower enclosure.
Орнотуу кадамдары:
- Position and Mark Wall Profiles:
Дубалды профессионалдуу түрдө жайгаштырыңызfile (S10) vertically on the wall according to your model size. Mark the wall with the hole positions on the profile. Ensure the profile is perfectly level. Mark hole positions on the wall using the wall profile, making sure holes are not too close to tile edges.
Image: Reversible installation options for the shower door, showing how it can be configured for left or right opening.
Image: Detail of the width adjustment feature, allowing up to 0.75 inches of adjustment on each side for a precise fit.
- Тешиктерди бургулап, дубалга бекиткичтерди орнотуңуз:
Drill holes at your marked positions with a 6mm (millimeter) drill bit (0.2362''). Insert the wall plugs (S02) into the holes with a hammer.
- Wall Pro тиркеңизfiles:
дубал про тиркеңизfile to the wall with screws (S03) and put on the screw cover. Repeat the same operation on the other side.
- Insert Fixed Panel:
Insert the fixed panel into the wall profile (S09).
- Secure Fixed Panels:
Secure the fixed panels with wall profiles using screws (S04, S05), then put on the decorative covers.
- Install Bottom Water Retaining Strip:
Install the bottom water retaining strip (S12) along the base of the fixed panel.
Image: The bottom seal strip ensures water retention, keeping your bathroom dry.
- Install Magnetic Water Retaining Strips:
Install the magnetic water retaining strips (S08) on the door panel.
Image: Detail of the magnetic strip, providing a secure closure and preventing water spillage.
- Орнотуу туткалары:
Install the handles (S11) on the moving panels.
Image: The durable stainless steel handle provides a simple and reliable way to open and close the door.
- Силикон герметикти колдонуу:
Apply silicone sealant to the outside edges of the profiles. Allow at least 24 hours for the sealant to dry before use. This step is crucial for a watertight seal.
Advanced Installation Tips (from user experience):
- Pre-Caulking for Stronger Seal: Instead of caulking at the very end, apply two thick beads of mold-resistant silicone caulk to the backside of the wall profile that goes against the tile wall. Gently press the profile against the wall, allowing the caulk to squish out. Then, screw the profile into place. This creates a uniform, 100% watertight seal behind the entire length and width of the railing, distributing the door's weight more effectively. Clean off excess caulk immediately.
- Айыруу убактысы: After pre-caulking and securing the first wall profile, allow at least 24 hours for the caulk to fully cure before proceeding with hanging the door or installing other components. This ensures maximum strength and waterproofing.
- Adjusting for Uneven Walls: The door-hinge railing does not have to go all the way inside the wall railing. You can gain additional width (e.g., 1/2 inch) by partially inserting the door-hinge railing into the wall-mount railing. Use this flexibility to achieve a perfectly level and aligned door, especially if your shower walls are not perfectly straight or level. Remember to caulk all joints between metal pieces with clear silicone before tightening screws.
5. Иштөө нускамалары
The ELEGANT Pivot Shower Door is designed for smooth and easy operation.
- To open the door, gently pull the handle outwards. The door pivots up to 90 degrees, providing a wide walk-in opening.
- To close the door, push the handle inwards until the magnetic strips engage, securing the door in the closed position.
- The door is reversible for left or right-hand installation, allowing flexibility to suit your bathroom layout.
Image: The pivot door partially open, illustrating its smooth swing mechanism.
Image: The shower door fully open, showcasing the generous entry space.
6. Техникалык тейлөө жана тазалоо
Proper care will ensure the longevity and appearance of your shower door.
- Айнек тазалоо: Clean glass panels regularly with a soft cloth and a non-abrasive glass cleaner. Avoid cleaners containing harsh chemicals, ammonia, or abrasive particles.
- Аппараттык тазалоо: Wipe down metal profiles and handles with a soft, damp Кыйшайып калган тактар үчүн, металл беттери үчүн атайын иштелип чыккан жумшак, абразивдүү эмес тазалоочу каражатты колдонуңуз.
- Мөөрдү тейлөө: Periodically inspect the water retaining strips and silicone seals for wear or damage. Replace them if necessary to maintain a watertight enclosure.
- Абразивтерден качыңыз: Never use abrasive brushes, scouring pads, or harsh chemicals on any part of the shower door, as this can damage the finish and glass.
7. Кыйынчылыктарды
Эгерде сиз душ кабинаңыздын эшиги менен кандайдыр бир көйгөйлөргө туш болсоңуз, төмөнкү кеңири таралган көйгөйлөрдү жана чечимдерди караңыз:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Water leakage from the bottom or sides. | Improperly installed or damaged water retaining strips/seals; insufficient silicone sealant. | Ensure all water retaining strips are correctly seated. Reapply silicone sealant to exterior joints, allowing 24 hours to cure. Check for gaps in the bottom seal strip. |
| Эшик бекем жабылбайт. | Misaligned magnetic strips; obstruction. | Check if the magnetic strips are aligned properly. Adjust the wall profiles slightly if needed (within the adjustment range) to ensure a tight seal. Remove any obstructions. |
| Эшик бош же солкулдап сезилет. | Loose screws in wall profiles or hinges. | Carefully tighten all screws securing the wall profiles and hinges. Do not overtighten. |
| Difficulty opening or closing the door. | Hinges require lubrication; misalignment. | Apply a small amount of silicone-based lubricant to the hinges. Check for proper alignment of the door panel within the frame. |
8. Техникалык шарттар
- Бренд: ЭЛЕГАНТ
- Модел: FP30-CO
- Өлчөмдөрү: 0.25 x 30 x 72 inches (Glass thickness x Width x Height)
- Алдын ала жазылуу: 23 дюйм
- Материал: 1/4 inch (6mm) Clear Tempered Glass (ANSI Z97.1 certified), Aluminum Profiles
- Бүтүрүү: Matte Black
- Элемент Салмагы: 46.9 фунт
- Жөнгө салуу: 0.75 inches (19mm) on each side for width adjustment
- эшик селкинчек: Outward up to 90 degrees
9. Кепилдик жана колдоо
ELEGANT stands behind the quality of its products. For specific warranty details, please refer to the documentation included with your purchase.
If you require assistance with online orders or product support, please:
- Tap "Your Account" - "Order Detail" - "Message Center" on the platform where you made your purchase.
- You may also reach us through email at sunnyshowerusa@gmail.com.
Thank you for being a valued ELEGANT customer.
