hayden BK-105 Dynamic Vocal Microphone Instruction Manual

1. Продукт бүтүп калдыview

The hayden BK-105 is a high-quality dynamic vocal microphone designed for clear sound reproduction in various applications such as karaoke, singing, speeches, and recording. It features a durable metal construction and a unidirectional (cardioid) pickup pattern to focus on the sound source while minimizing background noise.

1.1 Пакеттин мазмуну

Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:

• hayden BK-105 Dynamic Vocal Microphone
• 5-meter XLR to 6.35mm Cable
• Instruction Manual

2. Техникалык шарттар

3. Орнотуу

3.1 Connecting the Microphone Cable

1. Insert the XLR connector end of the microphone cable into the microphone's input port.
2. If necessary, rotate the connector to align the key on the cable connector with the groove in the microphone's input port.
3. Push the connector firmly into the microphone until it clicks into place, ensuring a secure connection.
4. Connect the 6.35mm (1/4 inch) jack end of the cable to the microphone input of your amplifier, karaoke machine, or speaker.

3.2 Disconnecting the Microphone Cable

To disconnect the cable from the microphone, grasp the connector firmly while depressing the release tab. Pull the connector straight away from the microphone.

4. Иштөө нускамалары

4.1 Микрофонду жайгаштыруу

• For optimal sound quality and to minimize feedback, aim the microphone directly towards the desired sound source (e.g., your mouth) and away from unwanted sound sources or speakers.
• Avoid covering any part of the microphone grille with your hand. Covering the grille can alter the sound characteristics and polar pattern, increasing the likelihood of feedback.

4.2 Unidirectional (Cardioid) Pickup Pattern

The BK-105 features a cardioid pickup pattern, which means it is most sensitive to sounds coming from directly in front of it and least sensitive to sounds from the rear. This design helps to isolate the main sound source and reduce the pickup of unwanted ambient noise.

4.3 Чуулду азайтуу

The microphone incorporates smart noise reduction technology to help filter out unwanted background noise, ensuring your voice remains clear and crisp.

5. Техникалык тейлөө

5.1 Торду тазалоо

It is important to keep foreign particles out of the grille and windscreen as they can affect the microphone's frequency response. The grille should be periodically cleaned using warm, soapy water. Rinse thoroughly with plain water and allow it to dry completely before reattaching it to the microphone.

5.2 Жалпы кам көрүү

• Due to the high sensitivity of the cartridge, avoid dropping the microphone from a height or subjecting it to strong impacts.
• To maintain sensitivity and sound quality, avoid exposing the microphone to excessive moisture or extreme temperatures.

6. Кыйынчылыктарды

6.1 Preventing Howling Sound (Feedback)

If a howling sound is generated, typically when the microphone head is covered by hand or brought too close to a speaker, follow these steps:

1. First, decrease the volume on your connected audio device (amplifier, speaker, etc.).
2. Reposition the microphone so that it is not pointed directly at any speakers.
3. Ensure there is a sufficient distance between the microphone and the speakers.

6.2 Үн чыгышы жок

• Check all cable connections to ensure they are secure and fully inserted.
• Verify that the microphone's ON/OFF switch (if present) is in the 'ON' position.
• Ensure the volume on your connected audio device is turned up and not muted.
• Test the microphone with another compatible audio device or cable if possible, to rule out component failure.

7. Колдоо маалыматы

For technical assistance or inquiries, please contact the manufacturer or importer:

• Өндүрүүчү: SPECTRUM AND CO. NEW DELHI - 9212347774
• Импорттоочу: HAYDEN AUDIO NEW DELHI 92123-47774