Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your FIFINE K040 Wireless Microphone System. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Пакеттин мазмуну
The FIFINE K040 Wireless Microphone System package includes the following items:
- 1 x Portable Metal Receiver
- 2 x Handheld Transmitters (Microphones)
- 1 x 1/4" Output Cable
- 1 х кубат адаптери
- 2 x Anti-rolling Silicone Rings
- 2 x Windscreens
- User Manual

Продукт бүттүview
Алуучу
The receiver unit manages the wireless connection and audio output.

Алдыңкы панелдин башкаруу элементтери:
- КҮЧ баскычы: Ресиверди күйгүзөт же өчүрөт.
- VOL A Knob: Adjusts the volume for Microphone A.
- VOL B Knob: Adjusts the volume for Microphone B.
- LCD дисплей: Shows frequency, channel, and signal indicators for both microphones.
Арткы панелдин туташуулары:
- DC INPUT: Берилген кубат адаптерин бул жерге туташтырыңыз.
- ANT-1 / ANT-2: Connect the antennas for signal reception.
- BALANCED-1 (XLR Output for Mic A): Professional audio output for Microphone A.
- BALANCED-2 (XLR Output for Mic B): Professional audio output for Microphone B.
- MIX OUT (1/4" Mix Output): Combined audio output for both microphones.
Handheld Microphones (Transmitters)
The system includes two handheld dynamic microphones.

- LCD экран: Displays current frequency and battery status.
- Кубат баскычы: Turns the microphone on or off.
- SET баскычы: Used to change frequencies.
- Батарея бөлүмү: Requires 2 x AA batteries (not included) for each microphone.
Орнотуу нускамалары
- Антенналарды орнотуу: Screw the two antennas onto the ANT-1 and ANT-2 connectors on the rear of the receiver. Ensure they are securely attached and positioned vertically for optimal signal reception.
- Ресиверди кубат: Connect the power adapter to the DC INPUT on the receiver and plug it into a power outlet. Press the POWER button to turn on the receiver.
- Микрофондорго батарейкаларды орнотуу: Open the battery compartment of each handheld microphone and insert 2 x AA batteries, observing correct polarity.
- Аудио тутумга туташуу:
- Using 1/4" Mix Output: Connect the provided 1/4" output cable from the MIX OUT port on the receiver to the input of your amplifier, mixer, or PA system. This combines the audio from both microphones into a single output.
- Using XLR Outputs: For separate control of each microphone, connect XLR cables (not included) from BALANCED-1 (Mic A) and BALANCED-2 (Mic B) to individual XLR inputs on your mixer.
- Connecting to TV (via Ampөмүр): If connecting to a TV, ensure your TV's audio output is connected to an audio amplifier, and then connect the FIFINE K040 receiver to the amplifier as described above.

Image: Diagram showing the FIFINE K040 receiver connected to an amplifier using the 1/4" Mix Output cable. 
Image: Diagram illustrating the connection of the FIFINE K040 receiver to an audio mixer using XLR cables for individual microphone outputs. 
Image: Diagram showing how to connect the FIFINE K040 receiver to a TV through an audio ampөмүрлүү. - Микрофондорду күйгүзүү: Press and hold the power button on each microphone until the LCD screen illuminates. The microphones should automatically pair with the receiver.
- Үндү тууралоо: Use the VOL A and VOL B knobs on the receiver to set the desired output volume for each microphone.
Иштөө нускамалары
Ensure all components are properly connected and powered on before operation.
- Микрофонду колдонуу: Hold the microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound pickup. Avoid covering the microphone grille with your hand.
- Үндү көзөмөлдөө: Adjust the individual volume knobs (VOL A, VOL B) on the receiver to balance the audio levels of each microphone.
- Frequency Selection (If Interference Occurs):
- If you experience interference, you can change the operating frequency of the microphones.
- On the handheld microphone, press the SET button. The frequency on the LCD display will change.
- The receiver will automatically synchronize with the new frequency.
- The system offers 50 selectable UHF frequencies per channel to minimize interference.
- Иштөө диапазону: The system provides a line-of-sight range of up to 35 meters (115 feet). Obstacles and other wireless devices may reduce this range.


Техникалык тейлөө
- Тазалоо: Wipe the receiver and microphones with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Батареяны алмаштыруу: Replace AA batteries in the microphones when the battery indicator on the microphone's LCD screen shows low power. Always use fresh batteries.
- Сактагыч: When not in use for extended periods, remove batteries from the microphones and store the system in a cool, dry place.
- Антеннага кам көрүү: Антенналарды ийилип же бузулуп калбашы үчүн этияттык менен кармаңыз.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Микрофондордон үн чыкпайт. |
|
|
| Интерференция же статикалык. |
|
|
| Алсыз же бурмаланган үн. |
|
|
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | K040 |
| Жыштык түрү | UHF (50 selectable frequencies per channel) |
| Каналдар | 2 |
| Микрофон түрү | Handheld Dynamic |
| Полярдык үлгү | Бир багыттуу |
| Иштөө диапазону | 35 м / 115 фут чейин (көрүү сызыгы) |
| Receiver Output | 1/4" Mix Output, 2 x XLR Balanced Outputs |
| Микрофондун күчү | 2 x AA batteries (per mic) |
| Алуучунун күчү | DC Power адаптери |
| Материал | Металл |
| Ызы-чуунун катышы | 70 дБ |
| Импеданс | 600 Ом |
| Элемент Салмагы | 1 Kilogram (total system) |
| Продукциянын өлчөмдөрү | 35 x 27 x 5 см |

Кепилдик жана колдоо
For warranty information and technical support, please refer to the warranty card included with your product or visit the official FIFINE webсайт. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.
Өндүрүүчү: FIFINE Technology
Импорттоочу (Индия): Origin Marketing Pvt Ltd - 9870294946





