AWOL VISION DLP Link 3D Glasses Instruction Manual

1. Киришүү

Thank you for choosing AWOL VISION DLP Link 3D Glasses. These active shutter glasses are designed to provide a bright, vivid, and immersive 3D viewing experience with compatible DLP-Link 3D projectors. This manual will guide you through the setup, operation, and maintenance of your new 3D glasses.

Негизги өзгөчөлүктөрү:

• Шайкештик: Designed for AWOL VISION LTV-2500, LTV-3000 Pro, LTV-3500 Pro, Vanish TV, and other DLP-LINK 3D projectors.
• Узак мөөнөттүү кайра заряддалуучу батарея: Бир кубаттоо менен 50 саатка чейин үзгүлтүксүз колдонуу.
• Эргономикалык дизайн: Lightweight (28 grams) and comfortable, suitable for extended wear and compatible with prescription glasses.
• Wide Viewбурч: 178° for distortion-free viewing.
• Bright & Vivid: Less than 1.5 ms response time and 38% high transmittance for clear, lossless 3D effects.

2. Пакеттин мазмуну

Бардык буюмдар кутуда бар экенин текшериңиз:

• AWOL VISION DLP Link 3D Glasses
• Glasses wipe
• USB заряддоо кабели
• Glasses Storage Case
• Glasses Storage Bag
• Колдонмо (бул документ)

3. Продукт бүтүп калдыview

Familiarize yourself with the components of your AWOL VISION 3D Glasses:

• Кубат которгучу: Located on the top of the frame, used for powering on/off and 3D image reversal.
• Liquid Crystal Lens: The active shutter lenses that create the 3D effect.
• Сигнал кабыл алуу терезеси: Receives the DLP-Link synchronization signal from the projector.
• USB кубаттоо порту: Ички батареяны кайра заряддоо үчүн.
• Кулак илгич: коопсуз жана жайлуу ылайыктуу камсыз кылат.

4. Орнотуу

Көз айнекти заряддоо:

Before first use, fully charge your 3D glasses. Connect the provided USB charging cable to the USB charging port on the glasses and to a standard USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status. A full charge typically takes 2-3 hours and provides up to 50 hours of continuous use.

Connecting to a DLP-Link 3D Projector:

These glasses automatically synchronize with DLP-Link 3D projectors. No manual pairing is required. Ensure your projector is set to output 3D content.

For detailed instructions on how to watch 3D movies with AWOL VISION 3D glasses, please refer to the video below:

5. Иштөө нускамалары

Күйгүзүү/өчүрүү:

• Күйгүзүү: Press the power button once. The LED indicator will light up.
• Өчүрүү: Press and hold the power button for 3 seconds until the LED indicator flashes three times and turns off.

Note: The glasses will power off automatically after 5 minutes without an IR signal to conserve battery.

3D Reversal:

If the 3D effect appears inverted (e.g., background in foreground), tap the power button to switch the direction of the 3D image sequence between left-to-right and right-to-left. This can resolve issues where the 3D image is not correctly aligned.

6. Техникалык тейлөө

Тазалоо:

Use the provided glasses wipe or a soft, lint-free cloth to clean the lenses. Avoid using abrasive cleaners or solvents that could damage the lens coating.

Сактагыч:

When not in use, store the 3D glasses in the provided storage case or bag to protect them from dust, scratches, and physical damage. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Батареяга кам көрүү:

To prolong battery life, avoid fully discharging the glasses frequently. Recharge them when the battery is low. If storing for an extended period, charge the glasses to about 50% every few months.

7. Кыйынчылыктарды

• No 3D Effect / Blurred Image:
  • Ensure the glasses are powered on.
  • Verify your projector is outputting 3D content and is compatible with DLP-Link technology.
  • Tap the power button on the glasses to perform a 3D reversal, as the image sequence might be incorrect.
  • Check if the content being played is indeed 3D.
  • Ensure the glasses are charged.
• Glasses Not Turning On:
  • Charge the glasses for at least 30 minutes.
  • Кубат баскычы бекем басылганын текшериңиз.
• Intermittent 3D Effect / Flickering:
  • Ensure there are no obstructions between the glasses and the projector's 3D signal emitter.
  • Check for strong ambient light sources that might interfere with the signal.
  • Ensure the glasses are within the recommended viewing distance of the projector.

8. Техникалык шарттар

9. Кепилдик жана колдоо

AWOL VISION is committed to providing excellent customer service and product quality.

• 30-Day Price Protection: Ensures you get the best value.
• 2 Years Product Support: Dedicated support for your product.

Колдоо кызматы менен байланышуу:

• Телефон / WhatsApp: +1 (888) 891-6866
• Электрондук почта: support@awolvision.com