Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BLNAN 18W LED Ceiling Light with Motion Sensor. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Two BLNAN 18W LED Ceiling Lights with motion sensors installed.
Коопсуздук маалыматы
Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн электр шаймандарын орнотууда жана иштетүүдө ар дайым негизги коопсуздук чараларын сактаңыз.
- Ensure the power supply is disconnected at the circuit breaker before installation or maintenance.
- Эгер ишенбесеңиз, орнотууну квалификациялуу электрик аткарышы керек.
- Do not install in locations with high humidity or extreme temperatures.
- Продукцияны өзгөртүүгө аракет кылбаңыз.
- Балдар жетпеген жерде сактаңыз.
Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- BLNAN 18W LED Ceiling Light (2 units)
- Mounting accessories (screws, wall anchors, wire connector)
- User Manual
Продукт өзгөчөлүктөрү
The BLNAN 18W LED Ceiling Light offers advanced features for convenient and efficient lighting:
- Интегралдык кыймыл сенсору: Automatically detects movement within a 3.5m range and 120° sensing angle, activating the light.
- Adjustable Hold Time: Selectable light duration of 30s, 120s, or 180s after motion detection.
- Үч жарык режими: ON (always on), AUTO (motion + light sensor), and G (motion sensor only).
- Жөнгө салынуучу түс температурасы: Choose between 3000K (Warm White), 4000K (Natural White), and 5000K (Cool White).
- Энергияны үнөмдүү: 18W power consumption with 1800LM output, suitable for 5-10m² areas. Standby power is only 0.25W.
- Ультра жука дизайн: Modern 2.5 cm ultra-thin profile with backlight for uniform, soft illumination.
- Жогорку сапаттагы курулуш: Uses high-quality SMD2835 lamp beads and V2 flame-retardant polycarbonate material for durability and safety.
- Оңой орнотуу: Lightweight polycarbonate material and metal safety cable simplify mounting without needing a ground wire.
Сүрөт: деталдуу view of the motion sensor and adjustment switches.
Орнотуу нускамалары
Follow these steps to install your BLNAN LED Ceiling Light:
- Орнотууга даярданыңыз: Disconnect the main power supply at the circuit breaker before starting. Ensure the mounting surface is clean and dry.
- Түс температурасын тандоо: Before mounting, use the slide switch on the back of the light panel to select your desired color temperature (3000K, 4000K, or 5000K). This setting cannot be changed easily after installation.
- Негизги плитаны орнотуу: Position the light base on the ceiling or wall. Mark the drilling points. Drill holes and insert wall anchors if necessary. Secure the base plate using the provided screws.
- Зымдарды туташтыруу: Hang the light fixture using the metal safety cable to prevent it from falling during wiring. Connect the live and neutral wires from your ceiling to the corresponding terminals on the light fixture using the provided wire connector. This light does not require a ground wire due to its insulated polycarbonate material.
- Жарык берүүчү приборду тиркөө: Align the light fixture with the mounted base plate. Push and rotate the light to securely attach it to the base.
- Күчтү калыбына келтирүү: Жарык бекем орнотулгандан кийин, автоматтык өчүргүчтөгү кубаттуулукту калыбына келтириңиз.
Image: Adjusting color temperature before installation.
Сүрөт: Орнотуу боюнча этап-этабы менен көрсөтмө.
Recommended Installation Height and Detection Range:
- Ceiling Mount: Recommended height 2.4 - 3.5 meters, with a maximum detection range of 6 meters.
- Wall Mount: Recommended height 1.8 - 2.4 meters.
Image: Motion sensor detection range and sensing angle.
Image: Recommended installation heights for wall and ceiling mounting.
Иштөө нускамалары
Your BLNAN LED Ceiling Light features adjustable settings for motion detection and light duration.
1. Adjusting Detection Modes and Hold Time
Use the slide switch located on the surface of the light, next to the motion sensor, to select the desired mode and hold time:
Сүрөт: бүттүview of the three detection modes.
- КҮЙҮК режими: The light will remain continuously on, functioning as a standard ceiling light. Motion detection is disabled.
- AUTO режими: (Motion Sensor + Light Sensor) The light will only activate at night or in low-light conditions when motion is detected. During the day, it remains off.
- G режими: (Motion Sensor Only) The light will activate whenever motion is detected, regardless of ambient light conditions (day or night).
For AUTO and G modes, use the adjacent slide switch to set the light duration (hold time) after motion detection:
- 30с: Light stays on for 30 seconds.
- 120с: Light stays on for 120 seconds.
- 180с: Light stays on for 180 seconds.
2. Түс температурасын жөндөө
The color temperature is set using a slide switch on the back of the light panel. This should be adjusted before final installation.
- 3000K: Warm White light, suitable for cozy environments.
- 4000K: Natural White light, ideal for general illumination.
- 5000K: Cool White light, suitable for task-oriented areas.
Image: Visual representation of different color temperatures.
Техникалык тейлөө
To ensure optimal performance and longevity of your BLNAN LED Ceiling Light:
- Тазалоо: Тазалоодон мурун электрди өчүрүңүз. Бетти жумшак, кургак чүпүрөк менен сүртүңүз. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
- Текшерүү: Periodically check for any loose connections or damage. If any issues are found, disconnect power and consult a qualified technician.
- The LED light source is designed for long-term use (30,000 hours) and does not require bulb replacement.
Проблемаларды чечүү
If you encounter issues with your BLNAN LED Ceiling Light, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жарык күйбөйт. | No power supply; Incorrect wiring; Sensor not detecting motion. | Check circuit breaker and wall switch. Verify wiring connections. Ensure sensor is not obstructed and is set to an appropriate mode (AUTO or G). |
| Жарык тынымсыз күйүп турат. | Mode set to "ON"; Constant motion in detection area. | Switch mode to "AUTO" or "G". Ensure there is no continuous movement within the sensor's range. |
| Жарык кокусунан күйөт. | Sensor sensitivity too high; Environmental factors (e.g., drafts, small animals, insects). | Ensure the sensor area is clear of obstructions or sources of false triggers. Consider adjusting the sensor's position if possible, or ensure it's not in a high-traffic area if random activation is problematic. |
| Жарык өчпөйт. | Hold time set too long; Continuous motion. | Check the hold time setting (30s, 120s, 180s). Ensure no continuous motion is detected. |
| Light only works at night. | Mode set to "AUTO". | If you want it to work during the day, switch the mode to "G". |
Техникалык шарттар
Detailed technical specifications for the BLNAN 18W LED Ceiling Light:
| Өзгөчөлүк | Спецификация |
|---|---|
| Бренд | БЛНАН |
| Модель номери | LS-CL-I18W-M-C |
| Өлчөмдөрү (L x W x Y) | 22 x 22 x 2.5 см |
| Салмагы | 1.05 килограмм |
| Материал | Поликарбонат (PC) |
| Күч | 18 Ватт |
| Жарык агымы | 1800 Lumens |
| Тtage | AC180-240V (230 Volts) |
| Түс температурасы | 3000K / 4000K / 5000K (Жөнгө салынуучу) |
| Түстөрдү көрсөтүү индекси (CRI) | >80 |
| Motion Sensor Detection Angle | 120° |
| Motion Sensor Detection Range | 3.5 метрге чейин |
| Убакыт жөндөөлөрүн кармоо | 30с / 120с / 180с |
| LED өмүрү | 30,000 саат |
| Энергия натыйжалуулугунун рейтинги | F (as per EU standards) (EPREL Link) |
| Орнотуу түрү | Шыпка орнотуу |
| Ички/тышкы колдонуу | Indoor |
Сүрөт: Энергиянын натыйжалуулугу жөнүндө этикетка.
Кепилдик жана колдоо
For any questions, concerns, or technical support regarding your BLNAN LED Ceiling Light, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase receipt for warranty claims.
