1. Киришүү
The Corsair iCUE H150i Elite CAPELLIX XT Liquid CPU Cooler is designed to provide high-performance cooling for Intel and AMD processors. It features a 360mm radiator, three AF120 RGB ELITE PWM fans, a copper cold plate, and an efficient pump head with CAPELLIX LEDs. The included iCUE COMMANDER CORE controller allows for precise control over RGB lighting and fan speeds through the Corsair iCUE software.
This cooler is compatible with a wide range of motherboard sockets, including Intel LGA 1700, 1200, 115X, and 2066, as well as AMD AM5 and AM4 sockets. Its design focuses on efficient heat dissipation, low-noise operation, and customizable aesthetics.
Figure 1: Corsair iCUE H150i Elite CAPELLIX XT Liquid CPU Cooler with fans and pump head.
2. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- 1x Corsair iCUE H150i Elite CAPELLIX XT Liquid CPU Cooler (360mm Radiator with integrated pump/cold plate)
- 3x Corsair AF120 RGB ELITE PWM Fans
- 1x iCUE COMMANDER CORE RGB Lighting and Fan Speed Controller
- Mounting Brackets for Intel (LGA 1700, 1200, 115X, 2066) and AMD (AM5, AM4) Sockets
- Mounting Hardware (screws, standoffs, backplates)
- USB Cable for iCUE Commander CORE
- Fan Extension Cables (if needed)
- Pre-applied CORSAIR XTM70 Thermal Paste (on cold plate)
Figure 2: Included AF120 RGB ELITE PWM Fans and iCUE Commander CORE controller.
3. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Модел | H150i Elite CAPELLIX XT (CW-9060070-WW) |
| Радиатордун өлчөмү | 360мм |
| Желдетүүчү түрү | 3x AF120 RGB ELITE PWM Fans |
| Fan Speed | 2100 RPM чейин |
| Ызы-чуу деңгээли | Up to 34.1 dBa |
| Аба агымынын кубаттуулугу | Мүнөтүнө 65.57 куб фут (CFM) |
| Муздатуу ыкмасы | Суюктук (Баары бир жерде) |
| Муздак плитанын материалы | Жез |
| Шайкеш Intel розеткалары | LGA 1700, 1200, 115X, 2066 |
| Шайкеш AMD розеткалары | AM5, AM4 |
| Продукциянын өлчөмдөрү | 15.63"L x 4.72"W x 1.06"H (Радиатор) |
Figure 3: ашыкview of CPU socket compatibility for the cooler.
4. Орнотуу жана орнотуу
Before installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific fan header locations.
4.1. Энелик платаны даярдаңыз
- CPU розеткаңыздын түрүн аныктаңыз (Intel же AMD).
- Attach the appropriate backplate to the rear of your motherboard.
- Install the correct standoffs onto the motherboard's CPU socket area.
4.2. Радиаторду жана желдеткичтерди орнотуңуз
- Mount the three AF120 RGB ELITE PWM fans to the 360mm radiator using the provided screws. Ensure the fan airflow direction is correct for your case's cooling strategy (intake or exhaust).
- Mount the radiator assembly into your PC case. Common locations include the top or front of the case. Secure it with the appropriate screws.
4.3. Install Pump/Cold Plate
- The cooler comes with pre-applied CORSAIR XTM70 thermal paste on the cold plate. Handle carefully to avoid disturbing it.
- Align the pump/cold plate assembly with the standoffs on your motherboard.
- Gently place the pump onto the CPU, ensuring even contact.
- Secure the pump with the provided thumbscrews or mounting nuts, tightening them in a diagonal pattern until snug. Do not overtighten.
Figure 4: The cooler features pre-applied thermal paste for simplified installation.
4.4. Кабелдик башкаруу
- Connect the three AF120 RGB ELITE PWM fans to the iCUE COMMANDER CORE controller.
- Connect the pump's power cable to an available SATA power connector from your power supply.
- Connect the pump's tachometer cable to the CPU_FAN header on your motherboard.
- Connect the iCUE COMMANDER CORE controller to an available internal USB 2.0 header on your motherboard using the provided USB cable.
- Туура аба агымын жана таза түзүлүштү камсыз кылуу үчүн бардык кабелдерди тыкан өткөрүңүз.
Video 1: Official Corsair iCUE LINK TITAN RX RGB AIO Trailer. This video demonstrates the aesthetic and some functional aspects of Corsair's AIO coolers, including RGB lighting and fan operation, which are relevant to the H150i Elite CAPELLIX XT.
5. Муздаткычты иштетүү
The Corsair iCUE H150i Elite CAPELLIX XT is managed through the Corsair iCUE software. This software allows for comprehensive control and monitoring of your cooler.
5.1. Corsair iCUE Software
Download and install the latest version of Corsair iCUE software from the official Corsair website. Once installed, iCUE will automatically detect your H150i Elite CAPELLIX XT cooler and the connected fans.
5.2. Fan Control
Within iCUE, you can:
- Adjust individual fan speeds or set custom fan curves based on CPU temperature.
- Utilize pre-set fan profiles, including a 0 RPM PWM mode that stops fans entirely at low temperatures for silent operation.
- Monitor fan RPM and other performance metrics.
5.3. RGB жарыктандырууну ыңгайлаштыруу
The CAPELLIX LEDs on the pump head and the RGB LEDs on the AF120 fans are fully customizable via iCUE. You can:
- Choose from a wide array of lighting effects and colors.
- Synchronize lighting across all compatible Corsair iCUE devices in your system.
- Create custom lighting layers and effects to personalize your build's aesthetic.
Figure 5: Dynamic RGB lighting on the pump head and fans, customizable via iCUE software.
Video 2: A user's demonstration of the Corsair iCUE H150i cooler, showcasing its RGB lighting and overall appearance within a PC build.
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө суюк CPU муздаткычыңыздын узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылууга жардам берет.
- Чаңды тазалоо: Аба агымына жана муздатуу иштешине тоскоол боло турган чаңдын топтолушуна жол бербөө үчүн радиатордун канаттарын жана желдеткичтин бычактарын мезгил-мезгили менен тазалап туруңуз. Кысылган абаны же жумшак щетканы колдонуңуз.
- желдеткич текшерүү: Check fan blades for any obstructions or damage. Ensure fans are securely mounted.
- Түтүк жана байланыштар: Inspect the tubing for any signs of leaks, kinks, or damage. Ensure all connections are secure.
- Термикалык паста: The pre-applied thermal paste is designed for long-term use. Reapplication is generally not necessary unless the cooler is removed and reinstalled. If reapplying, clean the old paste thoroughly and apply a thin, even layer of high-quality thermal paste.
7. Кыйынчылыктарды
7.1. Жогорку CPU температурасы
- Ensure fans are spinning and correctly oriented for optimal airflow.
- Check that the pump is running (you may feel a slight vibration or hear a faint hum).
- Verify the cold plate has proper contact with the CPU. Re-seat the cooler if necessary, ensuring even pressure.
- Радиатордун сүзгүчтөрүндөгү чаңды тазалаңыз.
- Confirm that the iCUE software is running and fan/pump profiles are set appropriately.
7.2. Fans Not Spinning or RGB Not Working
- Check all cable connections to the iCUE COMMANDER CORE controller and the motherboard.
- Ensure the iCUE COMMANDER CORE is receiving SATA power.
- Verify that the iCUE software is installed and updated.
- In iCUE, check the fan and lighting setup for any configuration errors.
7.3. Pump Noise
- Some pump noise is normal. If it's excessive, check for air bubbles in the loop by gently tilting your PC case.
- Насостун бекем орнотулганын жана башка компоненттерге титиребегенин текшериңиз.
- Adjust pump speed settings in iCUE to a quieter profile if available and temperatures allow.
8. Кепилдик жана колдоо
For warranty information, technical support, and additional resources, please visit the official Corsair webсайт:
You can also find FAQs, driver downloads, and community forums to assist with any questions or issues you may encounter.
