SERWALL Model 1

SERWALL Oversized Rocking Chair Instruction Manual

Model: Model 1

Бренд: Сервалл

1. Киришүү

This manual provides detailed instructions for the assembly, operation, maintenance, and care of your SERWALL Oversized Rocking Chair. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product.

2. Коопсуздук маалыматы

Коопсуздугуңуз үчүн жана продуктунун бузулушун алдын алуу үчүн төмөнкү көрсөтмөлөрдү аткарыңыз:

  • Колдонуудан мурун бардык компоненттердин бекем бекитилишин текшериңиз.
  • максималдуу салмак сыйымдуулугунан ашпаңыз 380 фунт.
  • Avoid standing on the chair or using it for purposes other than its intended use as a rocking chair.
  • Балдарды жана үй жаныбарларын чогултуу аянтынан алыс кармаңыз.
  • Periodically check all bolts and screws to ensure they remain tight.

3. Пакеттин мазмуну

Чогултууну баштоодон мурун бардык тетиктердин бар экенин текшериңиз. Эгерде кандайдыр бир тетиктер жок болсо же бузулуп калса, кардарларды колдоо кызматына кайрылыңыз.

Diagram showing all individual parts of the rocking chair and a bag of 304 stainless steel screws.

1-сүрөт: жарылган view of rocking chair components and hardware. Includes chair parts and 304 stainless steel screws.

4. Орнотуу жана монтаждоо нускамалары

Assembly typically takes approximately 30 minutes for one person. An online video guide is available for visual assistance.

  1. 1-кадам: Компоненттерди таңгактан чыгарыңыз. Carefully remove all parts from the packaging and lay them out on a clean, flat, soft surface to prevent scratching.
  2. Step 2: Attach Side Frames. Connect the side frame pieces to the seat base using the provided hardware.
  3. Step 3: Secure Backrest. Attach the backrest to the assembled seat and side frames.
  4. Step 4: Install Rockers. Secure the curved rocker runners to the bottom of the chair legs.
  5. 5-кадам: Акыркы бекемдөө. Once all parts are loosely assembled, gradually tighten all screws and bolts. Эскертүү: For best results, fully tighten screws only after complete assembly to allow for proper alignment.
Step-by-step visual guide for assembling the rocking chair, showing parts coming together over 7 steps.

Figure 2: Visual representation of the 7-step assembly process.

Видеону чогултуу боюнча колдонмо

Video 1: Official SERWALL assembly guide for the HDPE Outdoor Rocking Chair, demonstrating the construction process.

5. Иштөө нускамалары

The SERWALL Oversized Rocking Chair is designed for comfortable and stable rocking motion. To operate:

  • Sit centrally on the contoured seat.
  • Place your feet on the ground or a footrest to initiate rocking.
  • The precision-calculated rocking arc ensures a gentle and stable rhythm, minimizing the risk of tipping.
  • The ergonomic curved backrest and wide armrests provide optimal support and comfort during use.
An elderly woman comfortably seated in the rocking chair, illustrating the ergonomic design and anti-rollover feature compared to a generic chair.

Figure 3: Ergonomic design ensures stable and comfortable rocking.

6. Техникалык тейлөө

Maintaining your SERWALL rocking chair is simple due to its durable HDPE construction:

  • үзгүлтүксүз тазалоо: For general dirt and dust, wipe down the surface with a dry brush or cloth.
  • Терең тазалоо: For stubborn stains, use soapy water and a soft brush or cloth. Rinse thoroughly with clean water.
  • No Painting or Sealing: The HDPE material is designed to resist fading, cracking, and rot, eliminating the need for painting, staining, or sealing.
  • Аппараттык камсыздоону текшерүү: Periodically inspect all 304 stainless steel screws and bolts for tightness and re-tighten if necessary.
Close-up of the chair surface with water droplets, illustrating its waterproof and low-maintenance properties.

Figure 4: The HDPE material is waterproof and easy to clean.

7. Кыйынчылыктарды

If you encounter any issues with your rocking chair, please refer to the following common solutions:

  • солкулдап: Ensure all screws and bolts are fully tightened. Loosen slightly, adjust the chair on a flat surface, and then re-tighten all fasteners.
  • Термелүүнүн кыйынчылыгы: Verify the chair is on a flat, even surface. Uneven surfaces can impede smooth rocking motion.
  • Өчүшү/түсүнүн өзгөрүшү: While designed to resist fading, prolonged exposure to extreme UV can affect any material. Regular cleaning can help maintain its appearance.

For issues not covered here, please contact SERWALL customer support.

8. Техникалык шарттар

БрендSERWALL
Модель атыМодель 1
Продукциянын өлчөмдөрү32.5"D x 26"W x 41.3"H
Орундуктун бийиктиги16.7 дюйм
Отуруучу тереңдик18.5 дюйм
Seat Length19.6 дюйм
Стулдун аркасынын туурасы19.7 дюйм
МатериалЖогорку тыгыздыктагы полиэтилен (HDPE)
Аппараттык304 Stainless Steel Screws & Bolts
Максималдуу салмак боюнча сунуш380 фунт
Ички/тышкы колдонууСыртта

9. Кепилдик жана колдоо

SERWALL offers a 1000 Days Trial for this product. If you experience any issues or have questions regarding your rocking chair, please contact SERWALL customer support via Amazon. Your satisfaction is our priority.

Тектеш документтер - Модель 1

Preview HDPE термелүүчү отургучтарды чогултуу нускамалары | Serwall
Serwall HDPE термелүүчү отургуч үчүн комплекстүү монтаждоо нускамалары, анын ичинде коопсуздук боюнча кеңештер, компоненттердин тизмеси, аппараттык камсыздоонун чоо-жайы жана этап-этабы менен куруу көрсөтмөлөрү.
Preview Serwall HDPE термелүүчү отургуч жана Polywood каптал үстөл монтаждоо нускамалары
Serwall HDPE термелүүчү отургуч жана Polywood каптал үстөлү үчүн комплекстүү монтаждоо нускамалары, деталдарды, жабдыктарды жана оңой орнотуу үчүн этап-этабы менен чогултуу процедуралары.
Preview Serwall 33.46 дюймдук W 42000 BTU чарчы өлчөмдөгү суюк пропан менен күйүүчү от жагуучу столду чогултуу жана коопсуздук боюнча көрсөтмөлөр
Бул документте Serwall 33.46 дюймдук W 42000 BTU чарчы суюк пропан от жагуучу столунун (A072-003 модели) толук чогултуу көрсөтмөлөрү, коопсуздук эскертүүлөрү, иштетүү жол-жоболору, техникалык тейлөө көрсөтмөлөрү жана мүчүлүштүктөрдү оңдоо боюнча кеңештер берилген. Анда компоненттерди аныктоо, этап-этабы менен чогултуу, коопсуз иштетүү жана кам көрүү боюнча кеңири маалымат берилген.
Preview Seal Skin Covers Shell Rocking Стул өлчөө колдонмосу
Колдонмонун термелүүчү отургуч капкактары үчүн Seal Skin Covers деталдуу өлчөө колдонмосу. Кемчиликсиз туура келүү үчүн туурасын, тереңдигин, алдыңкы бийиктигин, арткы туурасын жана арткы бийиктигин кантип ченөөнү үйрөнүңүз.