Saker Mini Chainsaw User Manual

1. Киришүү жана коопсуздук маалыматы

Thank you for choosing the Saker Mini Chainsaw. This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference. Failure to follow these instructions may result in serious injury or property damage.

Жалпы коопсуздук эскертүүлөрү:

• Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, when operating the chainsaw.
• Keep hands and body parts away from the chain when the tool is running.
• Жумушчу аймактын бөтөн адамдардан, балдардан жана үй жаныбарларынан таза экенине ынаныңыз.
• Араны нымдуу шарттарда же күйүүчү суюктуктар же газдар бар жерде иштетпеңиз.
• Always remove the battery when performing maintenance, cleaning, or when the tool is not in use.
• Use only Saker approved batteries and chargers.

2. Пакеттин мазмуну

Carefully unpack your Saker Mini Chainsaw and verify that all items are present and undamaged. If any items are missing or damaged, please contact customer support.

Сүрөт: бүттүview of the Saker Mini Chainsaw kit, showing two complete chainsaw units, two 20V batteries, two chargers, two oil bottles, and two wrenches.

• Saker Mini Chainsaw Unit (x1 or x2, depending on kit)
• 20V 1500mAh Rechargeable Lithium Battery (x2)
• Батарея заряддагыч (x2)
• Guide Bar and Chain (pre-installed or separate, x1 or x2 sets)
• Chain Lubricant Bottle (empty, x1 or x2)
• Wrench/Screwdriver Tool (x1 or x2)
• Колдонуучунун Колдонмосу (бул документ)

3. Components Overview

Familiarize yourself with the main components of your Saker Mini Chainsaw before operation.

Сүрөт: деталдуу view highlighting key components: the lock-off lever for safety, the ergonomic handle, the protective baffle over the chain, and the location of the power motor.

• Lock-Off Lever: Prevents accidental starting. Must be pressed before the trigger can be engaged.
• Триггер: Activates the chainsaw motor.
• Ыңгайлуу туткасы: Designed for ergonomic grip and single-hand operation.
• Protective Baffle: Guards against debris and provides a measure of protection during operation.
• Гид тилкеси: Supports and guides the cutting chain.
• Cutting Chain: The primary cutting component, featuring a deep quenching process for sharpness.
• Power Motor: High-efficiency pure copper motor providing strong dynamic system.
• Батарея порту: 20V батареяны орнотуу үчүн.

4. Орнотуу

4.1. Батареяны кубаттоо жана орнотуу

1. Before first use, fully charge the 20V lithium battery using the provided charger. Connect the charger to a standard power outlet and then to the battery. The indicator light on the charger will show charging status.
2. Толук заряддалгандан кийин, батареяны заряддагычтан ажыратыңыз.
3. Align the battery with the battery port on the chainsaw handle and slide it in until it clicks securely into place. Ensure it is firmly seated.
4. Батареяны чыгаруу үчүн, чыгаруу баскычын басып (эгер бар болсо) жана батареяны сыртка жылдырыңыз.

4.2. Chain Installation and Tensioning (if not pre-installed)

If your chain is not pre-installed, follow these steps. Always wear gloves during chain handling.

1. Remove the side cover by loosening the retaining nut with the provided wrench.
2. Place the chain around the sprocket and guide bar, ensuring the cutting edges face the correct direction (refer to markings on the chain or guide bar).
3. Re-attach the side cover, but do not fully tighten the retaining nut yet.
4. Adjust the chain tensioning screw until the chain is snug against the guide bar but can still be pulled freely by hand. There should be a small amount of play (approx. 2-3mm) when pulled away from the guide bar at its midpoint.
5. Once tensioned, fully tighten the retaining nut.
6. Add chain lubricant to the designated reservoir (if applicable) or manually apply to the chain before use.

Image: Close-up of the chainsaw's chain and guide bar, emphasizing the high hardness chain, pure copper motor, overload protection, and overall higher efficiency for smooth cutting.

5. Иштөө нускамалары

5.1. Араны ишке киргизүү

1. Батарея толук заряддалганын жана коопсуз орнотулганын текшериңиз.
2. Hold the chainsaw firmly with one hand on the handle.
3. Press and hold the safety lock-off lever with your thumb.
4. While holding the lock-off lever, squeeze the trigger to start the chainsaw. Release the trigger to stop.

5.2. Кесүү техникасы

Always maintain a stable stance and clear surroundings. Avoid cutting above shoulder height.

Image: The Saker Mini Chainsaw in action, efficiently cutting through a tree branch, illustrating its use for pruning and trimming.

• Бутактуу бутактар: Position the chainsaw firmly against the branch. Start the cut slowly, allowing the chain to gain speed before applying gentle pressure.
• Small Logs/Firewood: Secure the material to be cut. Make sure the chainsaw is stable and the chain is clear of the ground or other obstructions.
• Кайрадан качуу: Be aware of the kickback zone at the tip of the guide bar. Always cut with the bottom of the guide bar, pushing the chainsaw into the wood.

Сүрөт: Коллаж көрсөтүүasing various applications of the Saker Mini Chainsaw, including garden pruning, cutting pipe tubes, bamboo, and preparing firewood.

6. Техникалык тейлөө

Regular maintenance ensures optimal performance and extends the lifespan of your chainsaw. Always remove the battery before performing any maintenance.

6.1. Чынжырды майлоо

The chain requires lubrication to reduce friction and wear. Use a suitable chain oil (not included) in the provided oil bottle.

• Fill the small oil bottle with appropriate chain lubricant.
• Apply a small amount of oil directly to the chain and guide bar before and during extended use.
• Ensure the chain is evenly coated.

6.2. Тазалоо

• After each use, clean sawdust and debris from the guide bar, chain, and motor housing using a brush or compressed air.
• Жарнама менен сыртын сүртүңүзamp кездеме. Катуу химиялык заттарды колдонбоңуз.
• Вентиляция тешиктери тоскоолдуктардан таза болушун камсыз кылыңыз.

6.3. Сактоо

• Араны кургак, коопсуз жерде, балдар жетпеген жерде сактаңыз.
• Узак убакытка сактоодон мурун, батарейканы чыгарып алыңыз.
• For long-term storage, fully charge the battery every 3-6 months to maintain its health.

7. Кыйынчылыктарды

If you encounter issues with your Saker Mini Chainsaw, refer to the following common problems and solutions.

For issues not listed here, or if solutions do not resolve the problem, please contact Saker customer support.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Saker products are designed for durability and performance. For warranty information, technical support, or to purchase replacement parts, please refer to the contact information provided with your product packaging or visit the official Saker webсайт.

For direct inquiries, you may also contact the seller, SAKER BM, through your Amazon purchase history.