Sanus Fixed Height Speaker Stands for Sonos Era 100 (WSSE12-W2) User Manual

Introduction

This manual provides comprehensive instructions for the assembly, installation, and maintenance of your Sanus Fixed Height Speaker Stands, specifically designed for the Sonos Era 100 wireless speaker. Please read all instructions carefully before beginning installation to ensure proper setup and safe operation.

Коопсуздук маалыматы

Always follow basic safety precautions when installing and using this product. Keep small parts away from children. Ensure all connections are secure before placing the speaker on the stand. Do not exceed the recommended weight capacity for the speaker stand.

Пакеттин мазмуну

Verify that all components are present before assembly. If any parts are missing or damaged, contact Sanus customer support.

Speaker Stand Post (2)
Негизги плита (2)
Speaker Platform (2)
Mounting Hardware for Sonos Era 100
Резина буттары (8)
Height-Adjustable Carpet Spikes (8)
Assembly Tool (e.g., Phillips screwdriver)

Орнотуу жана орнотуу

Follow these steps to assemble and install your speaker stands.

Attach Base Plate to Stand Post: Securely fasten the base plate to the bottom of the stand post using the provided screws and assembly tool. Ensure the connection is tight and stable.
Install Floor Protection: Depending on your flooring, attach either the rubber feet for hard surfaces or the height-adjustable carpet spikes for carpeted areas to the underside of the base plate. Adjust spikes as needed for leveling.
Route Speaker Cable: Before attaching the speaker platform, carefully route the Sonos Era 100 power cable and any other necessary cables through the oversized post of the speaker stand. This integrated cable management system helps maintain a clean and organized appearance.
Attach Speaker Platform: Secure the speaker platform to the top of the stand post using the designated screws.
Mount Sonos Era 100 Speaker: Place your Sonos Era 100 speaker onto the speaker platform. Use the included hardware to securely attach the speaker to the stand, ensuring it is stable and centered.

Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, showing dimensions of 34.4 inches height, 10 inches width, and 12.7 inches depth. — Image: Sanus Fixed Height Speaker Stand with Sonos Era 100 speaker, illustrating overall dimensions and a 5-year limited warranty badge.

Close-up of speaker stand bases showing options for rubber feet and height-adjustable carpet spikes. — Image: Detail of the stand bases, highlighting the inclusion of both rubber feet and height-adjustable carpet spikes for various floor types.

Иштөө нускамалары

These speaker stands are designed to position your Sonos Era 100 speakers at an optimal listening height for an enhanced audio experience.

Жайгашкан жери: Position the speaker stands in your desired listening area, ensuring they are on a stable, level surface.
Оптималдуу угуу: The fixed height of 34.4 inches (87.4 cm) is engineered to provide an ideal acoustic experience for most seating arrangements.

Sanus speaker stand with Sonos Era 100 speaker, emphasizing 'Optimal Listening Height'. — Image: The speaker stand with a Sonos Era 100 speaker, illustrating its optimal listening height.

Close-up of the speaker stand top, showing how it seamlessly integrates with the Sonos Era 100 speaker. — Сүрөт: жакын план view demonstrating the seamless integration of the speaker stand with the Sonos Era 100 speaker.

Техникалык тейлөө

To ensure the longevity and appearance of your speaker stands, follow these simple maintenance guidelines:

Тазалоо: Wipe the stands with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
Текшерүү: Мезгил-мезгили менен бардык бурамалар менен байланыштарды текшерип туруңуз, алар бекем жана бекем бойдон калууда.

Проблемаларды чечүү

Көйгөй	Мүмкүн себеп	Чечим
Туруктуу же туруксуз.	бош байланыштар; тегиз эмес пол.	Tighten all screws. If on carpet, adjust height-adjustable spikes until stable. If on hard floor, ensure rubber feet are properly installed and the surface is level.
Speaker does not fit securely.	Incorrect speaker model; improper mounting.	Ensure you are using a Sonos Era 100 speaker. Re-check mounting hardware and instructions to ensure correct attachment.
Кабелдер көрүнүп турат же чачыранды.	Cables not routed through the post.	Disassemble the top portion of the stand and re-route cables through the integrated cable management channel in the stand post.

Техникалык шарттар

Модель номери: WSSE12-W2
Шайкештик: Sonos Era 100 Wireless Speaker
Материал: Эритме болот
Түсү: Ак
Продукциянын өлчөмдөрү (L x W x Y): 12.7" x 10" x 34.4" (32.2 см x 25.4 см x 87.4 см)
Элемент Салмагы: 17.11 фунт (7.78 кг)
Оптималдуу угуу бийиктиги: 34.4 дюйм (87.4 см)
Кабелдик башкаруу: Integrated through-post design
Полдун шайкештиги: Includes rubber feet for hard floors and height-adjustable carpet spikes for carpeted surfaces.

Кепилдик маалымат

Sanus provides a 5 жылдык Чектелген Кепилдик for these speaker stands. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the official Sanus webсайтка же кардарларды колдоо менен байланышыңыз.

Колдоо

For further assistance, technical support, or to inquire about replacement parts, please visit the official Sanus website or contact their customer service department. You can find contact information on the Sanus webсайт: www.sanus.com

	Sonos Era 100/300 үчүн SANUS BSSEA2 бийиктиги жөндөлүүчү динамик стенди - Орнотуу боюнча колдонмо Sonos Era 100 жана Era 300 динамиктер үчүн иштелип чыккан SANUS BSSEA2 бийиктиги жөндөлүүчү динамик стенди үчүн расмий нускама. Коопсуздук нускамаларын, бөлүктөрдүн тизмесин, өлчөмдөрүн жана этап-этабы менен монтаждоону камтыйт.
	SANUS WSSE3A1/WSSE3A2 Sonos Era 300™ үчүн бийиктиги жөндөлүүчү динамик стенди - Instruction Manual Sonos Era 300™ динамиктери үчүн иштелип чыккан SANUS WSSE3A1/WSSE3A2 бийиктиги жөндөлүүчү динамик стендин чогултуу жана колдонуу боюнча толук нускамалар. Коопсуздук маалыматын, тетиктердин тизмесин жана этап-этабы менен чогултуу боюнча көрсөтмөлөрдү камтыйт.
	SANUS WSSE1A1/WSSE1A2 Height-Adjustable Speaker Stand for Sonos Era 100 - Instruction Manual This document provides detailed instructions for assembling and using the SANUS WSSE1A1 and WSSE1A2 height-adjustable speaker stands, designed specifically for Sonos Era 100 speakers. It includes essential safety warnings, product dimensions, a list of parts and hardware, step-by-step assembly guidance, and instructions for height adjustment and cable management.
	SANUS WSSE3A1/WSSE3A2 Height-Adjustable Speaker Stand for Sonos Era 300 - Instruction Manual Official instruction manual for the SANUS WSSE3A1/WSSE3A2 height-adjustable speaker stand designed for the Sonos Era 300 speaker. Includes safety information, parts list, dimensions, and step-by-step assembly instructions.
	SANUS HTBS бийиктиги жөндөлүүчү динамик стенддери (жуп) нускама боюнча SANUS HTBS бийиктиги жөндөлүүчү динамик стенддери үчүн комплекстүү нускама куралы (жуп), орнотууларды, коопсуздук чараларын, тетиктерди аныктоону жана ар кандай динамиктердин монтаждоо процедураларын.
	Sonos Ace үчүн SANUS WSHSH1-B2/WSHSH1-W2 гарнитура стенд - Instruction Manual Sonos Ace гарнитуралары үчүн иштелип чыккан SANUS WSHSH1-B2 жана WSHSH1-W2 гарнитуралары үчүн расмий нускама. Монтаж кадамдарын, коопсуздук эскертүүлөрүн жана продукттун чоо-жайын камтыйт.

Sanus WSSE12-W2

Sanus Fixed Height Speaker Stands for Sonos Era 100