Absima Micro Crawler PRO 1:18 RC Model Car

1. Киришүү

Thank you for choosing the Absima Micro Crawler PRO. This 1:18 scale brushed electric RC model car features 4-wheel drive (4WD) and operates on a 2.4 GHz radio system, designed for off-road crawling and precision driving. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new RC model.

Please read this manual thoroughly before operating the vehicle to ensure proper function and to maximize your enjoyment.

2. Коопсуздук нускамалары

• Чоңдордун көзөмөлү: This product is not a toy. Adult supervision is recommended for users under 14 years of age.
• Батареянын коопсуздугу: Always use batteries according to manufacturer's instructions. Do not mix old and new batteries, or different types of batteries. Remove batteries when not in use for extended periods.
• Иштөө чөйрөсү: Operate the vehicle in open areas, away from people, pets, and obstacles. Avoid operating near water, heat sources, or electrical wires.
• Кыймылдуу бөлүктөр: Keep fingers, hair, and loose clothing away from moving parts such as wheels and drivetrain components.
• Vehicle Condition: Before each use, inspect the vehicle for any damage or loose parts. Do not operate if damaged.
• Демонтаж: Do not attempt to disassemble or modify the vehicle or remote control. This may void your warranty and cause damage.

3. Пакеттин мазмуну

Сураныч, бардык буюмдар бар экенине ынануу үчүн пакетиңиздин мазмунун текшериңиз:

• Absima Micro Crawler PRO 1:18 RC Model Car
• 2.4 ГГц алыстан башкаруу бергичи
• USB Charging Cable (for vehicle battery)
• Instruction Manual

Note: Vehicle battery and remote control batteries are not included and must be purchased separately.

4. Орнотуу

4.1. Vehicle Battery Installation and Charging

The Absima Micro Crawler PRO uses a rechargeable LiPo battery (not included). Follow these steps to install and charge the battery:

1. Батарея отсегин унаанын астынан табыңыз.
2. Батарея уясынын капкагын ачыңыз.
3. Carefully insert the compatible LiPo battery into the compartment, ensuring correct polarity.
4. Connect the battery to the vehicle's power connector.
5. Батарея уясынын капкагын бекем жабыңыз.
6. To charge the battery, disconnect it from the vehicle and connect it to the provided USB charging cable. Connect the USB cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
7. Monitor the charging process. The indicator light on the USB charger will typically show red during charging and turn off or green when fully charged.
8. Заряддоочу батареяларды эч качан кароосуз калтырбаңыз.

1-сүрөт: Absima Micro Crawler PRO 1:18 RC Model Car. This image shows the compact design of the vehicle, highlighting its robust chassis and off-road tires, suitable for micro crawling.

4.2. Алыстан башкаруунун батареясын орнотуу

The 2.4 GHz remote control transmitter requires 2x AA batteries (not included). Follow these steps:

1. Пульттун артындагы батарея отсегин табыңыз.
2. Батарея бөлүмүнүн капкагын жылдырып ачыңыз.
3. Туура полярдуулукту (+/-) камсыз кылып, 2 даана AA батарейкасын салыңыз.
4. Батарея уясынын капкагын бекем жабыңыз.

4.3. Pairing the Transmitter and Vehicle

Your Absima Micro Crawler PRO and its transmitter are typically pre-paired from the factory. If re-pairing is necessary, follow these general steps:

1. Ensure both the vehicle battery and transmitter batteries are fully charged and installed.
2. Turn on the transmitter first. The indicator light on the transmitter may flash.
3. Turn on the vehicle. The indicator light on the vehicle's receiver (or ESC) may flash.
4. Wait a few seconds for the transmitter and vehicle to establish a connection. The indicator lights on both devices should become solid, indicating a successful bind.
5. If pairing fails, turn off both devices and repeat the process. Refer to the specific instructions on the vehicle's ESC/receiver for any dedicated bind button or procedure.

5. Иштөө

5.1. Негизги башкаруу элементтери

The 2.4 GHz remote control typically features the following controls:

• дроссель триггери: Алдыга жылуу үчүн тартыңыз, тормоздоо/артка жылдыруу үчүн басыңыз.
• Руль: Солго бурулуш үчүн солго, оңго бурулуш үчүн оңго бурулуңуз.
• Кесүү циферблаттары: Fine-tune steering and throttle to ensure the vehicle drives straight and stops when the trigger is neutral.
• Кубат которгучу: Өткөргүчтү күйгүзөт/өчүрөт.

5.2. Driving Tips for Micro Crawlers

• Жай жана туруктуу: Micro crawlers excel at slow, precise movements over obstacles. Avoid fast, jerky inputs.
• дроссель башкаруу: Use gentle throttle inputs to maintain traction and navigate challenging terrain.
• Башкаруу бурчу: Utilize the full steering angle to maneuver around tight spots.
• Тартуу борбору: Observe how the vehicle's weight shifts when climbing or descending. Adjust your approach to prevent rollovers.
• Изилдөө: Experiment with different lines and angles to conquer obstacles.

6. Техникалык тейлөө

6.1. Тазалоо

• After each use, especially in dusty or dirty conditions, clean the vehicle.
• Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and drivetrain.
• Wipe down the body with a soft, damp кездеме. Катуу химиялык заттарды колдонуудан алыс болуңуз.
• Ensure all electronic components are dry before storing.

6.2. Сактоо

• Store the vehicle and remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
• Remove batteries from both the vehicle and the remote control if storing for an extended period to prevent leakage.
• Store LiPo batteries at a "storage charge" level (typically around 3.8V per cell) to prolong their lifespan.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Manufacturer: Absima

Модель номери: 18029