XDeer S009 Biometric Flat Wall Safe

1. Киришүү

Thank you for choosing the XDeer S009 Biometric Flat Wall Safe. This manual provides essential information for the safe and efficient operation of your new security product. Please read these instructions thoroughly before installation and use, and retain them for future reference.

2. Коопсуздук боюнча маанилүү маалымат

• Always keep emergency keys in a secure location away from the safe and out of reach of unauthorized individuals.
• Авариялык ачкычтарды сейфтин ичинде сактабаңыз.
• Ensure the safe is securely mounted according to the installation instructions to prevent unauthorized removal.
• Regularly check battery levels and replace batteries as indicated by the low battery warning to ensure continuous operation.
• Avoid exposing the safe to extreme temperatures or humidity.

3. Продукт бүтүп калдыview

The XDeer S009 Biometric Flat Wall Safe is designed for discreet and secure storage of valuables. It features multiple access methods and a robust construction.

Figure 1: XDeer S009 Wall Safe Internal Features
This image highlights the internal layout and key features of the XDeer S009 wall safe, including the biometric fingerprint scanner, numeric keypad, removable dividers, internal LED light, battery slots, programming buttons, and key hooks.

• Hidden Wall Safe Design: Fits between standard 16-inch on-center wall studs for concealed installation.
• Advanced Access Panel: Located on the left side, featuring biometric fingerprint and numeric keypad entry.
• Алынуучу бөлгүчтөр: Two adjustable shelves for organizing different items.
• Туруктуу курулуш: Made from hardened carbon steel with a pry-resistant door and 10-gauge laminated steel shell.
• Quick Biometric Access: Fingerprint recognition in 0.1 seconds, supporting up to 20 unique fingerprints.
• Multiple Entry Methods: Fingerprint, PIN code, and emergency key access.
• Колдонуучуга ыңгайлуу өзгөчөлүктөр: Backlit keypad, internal LED lighting, silent mode, and USB emergency power port.

4. Орнотуу

4.1. Сейфти орнотуу

The XDeer S009 wall safe is designed to be installed between standard 16-inch on-center wall studs. Ensure you have the necessary tools and understand the wall structure before proceeding.

2-сүрөт: Орнотуу кадамдарынын схемасы
This diagram illustrates the three main steps for installing the XDeer S009 wall safe: cutting the wall opening, aligning the safe, and securing it with screws.

1. Дубалдын ачылышын даярдоо: Cut an opening in the wall between two studs, measuring approximately 20.86 inches high and 14.96 inches wide. The safe is designed to fit 16-inch on-center studs.
2. Align and Insert Safe: Carefully align the safe into the prepared wall opening. Ensure the left side of the safe has two pre-drilled holes and the right side has three pre-drilled holes for mounting.
3. Secure the Safe: Drive the provided screws through the pre-drilled holes into the wall studs to firmly secure the safe.

4.2. Initial Power-Up and Battery Installation

The safe requires 4 AAA batteries (not included) for operation. The battery compartment is located inside the safe.

1. Open the safe using the emergency key (refer to the emergency key access section if needed).
2. Батарея бөлүмүн эшиктин ички бетинен табыңыз.
3. Insert 4 new AAA batteries, ensuring correct polarity.
4. Close the battery compartment. The safe will emit a beep, indicating it is powered on.

5. Сейфиңизди иштетүү

5.1. Кирүү ыкмалары

Your XDeer S009 safe offers three ways to access your valuables:

• Биометрикалык манжа изи: Quick access by scanning a registered fingerprint.
• Сандык баскычтоп: Access using a programmed PIN code.
• Шашылыш ачкыч: Manual override for emergency situations or dead batteries.

5.1.1. Biometric Fingerprint Access

Figure 3: Fingerprint Unlock Mechanism
This image shows the fingerprint sensor on the safe's control panel, indicating where to place your finger for biometric access.

1. Катталган манжаңызды манжа изинин сенсоруна бекем коюңуз.
2. The safe will unlock in approximately 0.1 seconds if the fingerprint is recognized.

5.1.2. Numeric Keypad Access

1. Enter your programmed PIN code on the numeric keypad.
2. Ырастоо үчүн '#' баскычын басыңыз.
3. The safe will unlock if the PIN code is correct.

5.1.3. Emergency Key Entry

1. Locate the hidden keyhole behind the XDeer logo plate on the control panel.
2. Gently remove the logo plate to expose the keyhole.
3. Сейфтин кулпусун ачуу үчүн шашылыш ачкычты салып, аны бураңыз.

5.2. Манжа издерин программалоо

Figure 4: Fingerprint Technology Overview
This image details the process and specifications of the fingerprint recognition system, including the 0.1-second read time and high DPI.

1. With the safe door open, press the internal programming button (usually located near the battery compartment).
2. Place your finger on the scanner and lift it. Repeat this process 4 times, repositioning your finger slightly each time.
3. The safe will confirm successful registration with a series of beeps.
4. You can register up to 20 individual fingerprints.

5.3. Setting/Changing PIN Code

1. Сейфтин эшиги ачык турганда, ички программалоо баскычын басыңыз.
2. Клавиатурадан каалаган 4-8 орундуу PIN кодун териңиз.
3. Ырастоо үчүн '#' баскычын басыңыз.
4. Re-enter the same PIN code and press '#' again to confirm.
5. The safe will confirm successful programming with a series of beeps.

5.4. Унчукпай режим

To enable or disable silent mode, press and hold the '0' key on the keypad for 3 seconds. The safe will beep once to confirm the change in mode.

5.5. Backlit Keypad and LED Lights

The keypad illuminates when activated, guiding you to enter your code. The internal LED light provides visibility inside the safe when the door is opened.

6. Кароо жана тейлөө

6.1. Батареяны алмаштыруу

When the keypad light flashes 10 times with 10 beeps upon opening, the battery level is critically low. Replace all 4 AAA batteries immediately to ensure continued functionality.

6.2. Тазалоо

Сейфтин сыртын жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонуудан алыс болуңуз, бул финишке же электрондук компоненттерге зыян келтирет.

7. Кыйынчылыктарды

8. Техникалык шарттар

9. Кепилдик жана Кардарларды колдоо

XDeer provides a 1-year warranty for this product. If you encounter any issues or have questions regarding your XDeer S009 Biometric Flat Wall Safe, please contact XDeer customer support for assistance. Refer to the product packaging or the official XDeer webакыркы байланыш маалыматы үчүн сайт.