Introduction
This instruction manual provides essential information for the proper installation, operation, and maintenance of your JIARUIXIN JR1922RXS-2 12V 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's powered ride-on cars. Please read this manual thoroughly before use to ensure safe and correct functionality.
Пакеттин мазмуну
Пакет төмөнкү компоненттерди камтыйт:
- 1 x JR1922RXS-2 Control Box (12V)
- 1 x 2.4G Bluetooth Remote Control
Шайкештикти текшерүү
To ensure this control box and remote control kit is compatible with your child's electric ride-on car, please follow these steps:
- Open the compartment of your existing electric ride-on car where the control box is located.
- Carefully examine the appearance and model number of your original control box.
- If the appearance and model number (JR1922RXS-2) match your original part, this replacement kit should be compatible. The control box features a 7-pin yellow four-sided socket.



Орнотуу жана орнотуу
1. Алыстан башкаруунун батареясын орнотуу
The remote controller requires two AAA (1.5V) batteries (not included). To install the batteries:
- Пульттун артындагы батарея отсегин табыңыз.
- Бураманы бошотуп, батареянын капкагын ачуу үчүн бурагычты колдонуңуз.
- Туура полярдуулукту (+/-) камсыз кылуу менен эки AAA батарейкасын салыңыз.
- Батарейканын капкагын жаап, бурамасын бекемдеңиз.

2. Frequency Matching (Pairing)
The remote control and the vehicle's control box must be paired before first use or if the remote control batteries are replaced. This product has a memory function, so re-matching is generally not needed after battery replacement unless issues arise.
- Алыстан башкаруу пультунда жаңы батарейкалар орнотулганын текшериңиз.
- Бурул ӨЧҮРҮҮ the power switch on the ride-on vehicle.
- On the remote control, simultaneously press and hold the "▲" (Forward) and "▼" (Back) keys for approximately 3 seconds. The first LED indicator on the remote will begin to flicker.
- While the remote's LED is flickering, turn ON the power switch on the ride-on vehicle.
- The red indicator lights on the remote control should stop flashing, indicating that the pairing process is successful.

Иштөө нускамалары
Once the remote control is paired with the vehicle, you can operate the ride-on car using the following controls:

- Кыймылды башкаруу:
- "▲" (Up Arrow): Moves the vehicle Алга.
- "▼" (Down Arrow): Moves the vehicle Артка. Note: The vehicle typically operates at low speed when moving backward.
- "◄" (Left Arrow): Turns the vehicle Солго.
- "►" (Right Arrow): Turns the vehicle Туура.
- Ылдамдыкты көзөмөлдөө:
- "S" (Speed Button): Press this button to cycle through speed settings.
- 1 LED lit: Low speed.
- 2 LEDs lit: Medium speed.
- 3 LEDs lit: High speed.
- "S" (Speed Button): Press this button to cycle through speed settings.
- Brake/Parking:
- "P" (Parking/Brake Button): Press and hold this key to engage the brake. All LED indicators on the remote will flicker when the brake is active.
Күтүү режиминде: If the remote control is not operated for 10 seconds, it will enter standby mode. Press any key to wake it up.
Маанилүү: The remote controller is intended for use under adult guidance only.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | JR1922RXS-2 |
| Control Box Voltage | DC 12V |
| Control Box Load Current | Макс 35А |
| Башкаруу ыкмасы | 2.4G Bluetooth |
| Иштөө жыштыгы | 2.407 ГГц - 2.473 ГГц |
| Алыстан башкаруунун батареясы | 2 x AAA 1.5V (киргизилген эмес) |
| Продукциянын өлчөмдөрү | 4.2 x 3.2 x 3.2 дюйм (башкаруу кутусу) |
| Элемент Салмагы | 6.4 ounces (Total package) |
| Өндүрүүчү | JIARUIXIN |
Проблемаларды чечүү
Remote Control Not Responding / Pairing Issues
- Батареяларды текшерүү: Ensure the remote control has fresh AAA batteries installed with correct polarity.
- Re-match Frequency: Follow the "Frequency Matching (Pairing)" steps in the Setup section.
- Wake from Standby: If the remote has been idle for 10 seconds, press any button to wake it up.
Interference and FCC Compliance
Бул аппарат FCC эрежелеринин 15-бөлүгүнө ылайык келет. Операция төмөнкү эки шартка ылайык жүргүзүлөт:
- Бул аппарат зыяндуу тоскоолдуктарды жаратпашы мүмкүн.
- Бул аппарат келген тоскоолдуктарды, анын ичинде каалабаган операцияга алып келиши мүмкүн болгон тоскоолдуктарды кабыл алышы керек.
Эскертүү:
Бул жабдуу сыналган жана FCC Эрежелеринин 15-бөлүгүнө ылайык, В классындагы санариптик аппараттын чектөөлөрүнө жооп берери аныкталган. Бул чектөөлөр турак жай орнотулган зыяндуу кийлигишүүлөрдөн акылга сыярлык коргоону камсыз кылуу үчүн иштелип чыккан. Бул жабдуу радио жыштык энергиясын өндүрөт, колдонот жана нурландыра алат жана эгер көрсөтмөлөргө ылайык орнотулбаса жана колдонулбаса, радио байланыштарына зыяндуу тоскоолдуктарды жаратышы мүмкүн. Бирок, кандайдыр бир орнотууда кийлигишүү болбойт деген кепилдик жок. Эгерде бул жабдуу радио же телевизорду кабыл алууда зыяндуу тоскоолдуктарды жаратса, аны өчүрүү жана күйгүзүү аркылуу аныктоого болот, колдонуучуга төмөнкү чаралардын бири же бир нечеси аркылуу тоскоолдукту оңдоого аракет кылуу сунушталат:
- Кабыл алуучу антеннанын багытын өзгөртүңүз же башка жерге которуңуз.
- Жабдуу менен кабыл алгычтын ортосундагы бөлүнүүнү көбөйтүңүз.
- Жабдууларды ресивер туташтырылгандан башка схемадагы розеткага туташтырыңыз.
- Жардам алуу үчүн дилерге же тажрыйбалуу радио/телевидение техникине кайрылыңыз.
Эскертүү:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Техникалык тейлөө
- Keep the control box and remote control dry and clean.
- Avoid exposing the components to extreme temperatures or direct sunlight.
- Эгерде алыстан башкаруу пульту көпкө чейин колдонулбаса, агып кетүүнүн алдын алуу үчүн батарейкаларды алып салыңыз.





