Introduction
This manual provides comprehensive instructions for the installation, setup, operation, maintenance, and troubleshooting of your TEEHO TE002L Fingerprint Door Lock. Please read this manual carefully before installation and retain it for future reference.
Видео: Бүттүview of the TEEHO TE002L Fingerprint Door Lock, highlighting its key features and functionality.
Эмне камтылган
The TEEHO TE002L Fingerprint Door Lock package includes the following components:
- Сырткы баскычтоптун жыйындысы
- Ички ассамблея
- 2 рычагдын туткалары
- Дедболт Latch
- Монтаждоо плитасы
- Strike Plate
- Screws and Installation Hardware
- Камдык ачкычтар (2)
- Кайра орнотуу куралы
- Орнотуу нускамалары

Image: All components included in the TEEHO TE002L Fingerprint Door Lock package, laid out for easy identification.
Орнотуу нускамалары
Follow these steps to properly install your TEEHO TE002L Fingerprint Door Lock. Ensure your door is compatible with the lock's dimensions (1-3/8" to 2" thick, 2-3/8" or 2-3/4" backset).
1. Эшикти даярдаңыз
- Remove any existing lock hardware from your door.
- Verify door dimensions and drill holes if necessary, according to the provided template (not included in this manual).

Image: Diagram illustrating door thickness and backset measurements for compatibility with the TEEHO TE002L lock, suitable for both left-handed and right-handed doors.
2. Латчты орнотуңуз
- Insert the deadbolt latch into the door edge. Ensure the "TOP" indicator on the latch is facing upwards.
- Берилген бурамалар менен кулпуну бекитиңиз.
3. Сырткы монтажды орнотуңуз
- Feed the cable from the exterior keypad assembly through the door hole and under the latch.
- Куйрукту бекиткичтин борбордук тешиги менен тууралаңыз.
- Press the exterior assembly firmly against the door.
4. Монтаждоо плитасын орнотуңуз
- Place the mounting plate on the interior side of the door, aligning it with the exterior assembly.
- Secure the mounting plate using the long screws, ensuring the cable is not pinched.
5. Ички жыйынды орнотуу
- Кабелди тышкы монтаждан ички монтажга туташтырыңыз.
- Ensure the thumbturn on the interior assembly is in the vertical (unlocked) position.
- Attach the interior assembly to the mounting plate and secure it with screws.
- Test the thumbturn to ensure smooth operation.
6. Install the Lever Handles
- Insert the spindle of the exterior lever handle through the latch mechanism.
- Attach the interior lever handle, ensuring it engages correctly with the spindle.
- Secure both lever handles with the provided screws.
7. Strike Plate орнотуу
- Эшиктин рамкасындагы бекиткич менен сокку плитасын тууралаңыз.
- Берилген бурамалар менен эпкиндүү пластинаны бекитиңиз.
Video: Detailed installation guide for the TEEHO TE002L Fingerprint Door Lock, demonstrating each step from preparing the door to securing the components.
Орнотуу жана программалоо
After installation, you need to set up and program your lock. The default master code is 12345678. It is required that you change it to a code of your own before programming any other features.
1. Restore to Factory Settings (Initial Setup)
- Install 3 AA batteries into the interior assembly.
- Using the reset tool (or a similar pointed object), press and hold the reset button located inside the battery compartment.
- While holding the reset button, insert the 4th AA battery.
- Continue holding the reset button for 5 seconds until you hear a long "Beep". This indicates a successful reset.
2. Мастер кодду өзгөртүү
- Press the "TEEHO" button twice.
- Enter the current Master Code (default: 12345678).
- Press the "TEEHO" button.
- Press "1".
- Enter your new Master Code (4-10 digits).
- Press the "TEEHO" button.
- Re-enter your new Master Code.
- Press the "TEEHO" button. (A green light flash indicates success).
3. Add User Code
- Press the "TEEHO" button twice.
- Негизги кодуңузду киргизиңиз.
- Press the "TEEHO" button.
- Press "2".
- Enter a new User Code (4-10 digits).
- Press the "TEEHO" button.
- Re-enter the new User Code.
- Press the "TEEHO" button. (A green light flash indicates success).
4. Add User Fingerprints
- Press the "TEEHO" button twice.
- Негизги кодуңузду киргизиңиз.
- Press the "TEEHO" button.
- Press "4".
- Scan the user's fingerprint 8 times, each time succeeding with a short beep. (A green light flash indicates success).

Image: A hand demonstrating the fingerprint unlock feature on the TEEHO TE002L lock, highlighting its biometric identification capabilities.
5. Автоматтык кулпулоо функциясы
- To enable/disable Auto-Lock: Press the "TEEHO" button twice, enter Master Code, press "TEEHO", then press "7". Press "1" to enable or "2" to disable.
- To set Auto-Lock time delay (10-99 seconds): Press the "TEEHO" button twice, enter Master Code, press "TEEHO", then press "0". Enter the desired duration (e.g., 30 for 30 seconds), then press "TEEHO".

Image: A woman carrying a baby and groceries, illustrating the convenience of the auto-lock feature of the TEEHO TE002L lock, which can be set to lock automatically after 10-99 seconds.
6. Бир тийүү менен кулпулоо
- To activate one-touch locking, press and hold any key on the keypad for 2 seconds. The door will lock immediately.
7. One-Time PIN Code
- To add a one-time PIN code: Press the "TEEHO" button twice, enter Master Code, press "TEEHO", then press "9". Enter the new one-time user code, press "TEEHO", re-enter the code, then press "TEEHO". This code will be automatically deleted after one use.

Image: A man receiving a one-time PIN code via phone, demonstrating the temporary access feature of the TEEHO TE002L lock for visitors or service providers.
8. Anti-Peeping PIN Code
- To prevent others from seeing your code, you can enter random digits before or after your actual PIN code. The lock will still recognize the correct sequence within the longer entry.

Image: A hand entering an anti-peeping PIN code on the TEEHO TE002L keypad, showing how random digits can be added before or after the actual code for privacy.
9. Эс алуу режими
- To enable/disable Vacation Mode: Press the "TEEHO" button twice, enter Master Code, press "TEEHO", then press "8". (A green light flash indicates Vacation Mode is enabled). In this mode, all user codes and fingerprints are temporarily disabled, and only the Master Code or physical key can unlock the door.
10. Унчукпай режим
- To enable/disable Silent Mode: Press the "TEEHO" button twice, enter Master Code, press "TEEHO", then press "6". Press "1" to enable or "2" to disable. This mutes all beeps and sounds from the lock.
Video: Programming guide for the TEEHO TE002L Smart Lock, detailing steps for changing the master code, adding user codes, adding fingerprints, and setting various modes.
Функциялар жана функциялар
- 3D Fingerprint Unlock: 99.99% biometric fingerprint recognition rate, unlocks in 0.3 seconds.
- Ачкычсыз кирүү: Supports up to 20 access codes (4-10 digits) and fingerprints. One-time PIN codes can be set for temporary access.
- Автоматтык кулпулоо: Can be set to lock automatically in 10-99 seconds.
- Бир тийүү кулпусу: Press and hold any key on the keypad for 2 seconds to lock the door.
- Туура эмес кодду киргизүү чеги: Keypad deactivates for 3 minutes after 10 unsuccessful attempts with an invalid password.
- Security Deadbolt: ANSI Grade 3 rated, made with sturdy lock cylinder and alloy.
- Күч: Powered by 4 AA batteries, providing over 1 year of battery life. Features a low battery indicator.
- Аба ырайынын туруктуулугу: IP54 rating, operates well in temperatures from -22°F to 158°F.

Сүрөт: бүттүview of the TEEHO TE002L lock's key features, including support for multiple fingerprints and user codes, auto-lock, IP54 weather resistance, one-time PIN codes, one-touch locking, and a low battery indicator.
Техникалык тейлөө
- Батареяны алмаштыруу: Replace all four AA batteries when the low battery indicator appears. Use alkaline batteries for optimal performance.
- Тазалоо: Wipe the keypad and lock body with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Майлоо: Periodically lubricate the latch mechanism with a silicone-based lubricant to ensure smooth operation.
- Программалык камсыздоонун жаңыртуулары: Check the TEEHO website or app (if applicable) for any available firmware updates to ensure optimal performance and security.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Кулпу жооп бербей жатат / Кубат жок | Өлгөн батареялар. | Бардык төрт AA батарейканы алмаштырыңыз. |
| Keypad deactivated | 10 incorrect code entries. | Wait 3 minutes for the keypad to reactivate. |
| Манжа изи таанылган жок | Манжа кир, суу же туура эмес коюлган. Манжа изи катталган эмес. | Ensure finger is clean and dry. Place finger flat on the sensor. Re-register fingerprint if necessary. |
| Auto-lock not working | Auto-lock feature is disabled or time delay is too long. | Enable Auto-Lock and set the desired time delay in programming. |
| Lock does not lock/unlock smoothly | Кулпунун компоненттеринин же эшиктин рамасынын туура эмес жайгашуусу. | Check installation for proper alignment. Ensure door frame strike plate is correctly positioned. |
Техникалык шарттар
- Бренд: ТЕЕХО
- Модель аты: Fingerprint Door Lock with 2 Lever Handles
- Модель номери: TE002L
- Кулпу түрү: Биометрикалык
- Өзгөчө өзгөчөлүгү: Fingerprint, Keypad, Auto-Lock, One-Touch Lock, One-Time PIN Code, Anti-Peeping Code, Silent Mode, Vacation Mode
- Материал: Эритме болот
- Түсү: Matte Black
- Элементтин өлчөмдөрү (L x W x Y): 1 x 1 x 1 дюйм
- Элемент Салмагы: 3.7 фунт (1.68 килограмм)
- Кубат булагы: 4 АА батарейкалар (киргизилген эмес)
- Батареянын иштөө мөөнөтү: 1 жылдан ашык
- Аба ырайынын туруктуулугу: IP54
- Иштөө температурасы: -22°F жана 158°F
- Коопсуздук рейтинги: ANSI 3-класс
- Туташуу протоколу: Туташкан эмес
Кепилдик жана колдоо
TEEHO offers a 1-year warranty on all parts and lifetime customer service for the TE002L Fingerprint Door Lock. This includes online phone support from Monday to Friday, 9 AM to 5 PM PST, and 24/7 online email service.
For assistance, please contact TEEHO customer support:
- Телефондук колдоо: Дүйшөмбү - Жума, саат 9:00 - 17:00 PST
- Электрондук почта колдоо: 24/7 online service





