PaiPaitek титиреген ит жакасы колдонуучунун колдонмосу

Introduction

The PaiPaitek Vibrating Dog Collar is a humane and effective training tool designed to assist in correcting unwanted dog behaviors without the use of static shock. This collar utilizes vibration and sound modes to get your dog's attention and reinforce commands. With a long range and waterproof design, it is suitable for various training environments.

Image: The PaiPaitek Vibrating Dog Collar receiver and its remote control unit, showcasinалардын дизайны жана компоненттери.

Жайгашуу

Пакеттин мазмуну

Баштоодон мурун, бардык компоненттердин бар экендигин текшериңиз:

• Remote Transmitter x1
• Алуучу x1
• Lanyard x1
• Nylon Collar Strap x1
• USB кубаттоо кабели x1
• Колдонуучунун колдонмосу x1
• Куту x1

Түзмөктөрдү заряддоо

Both the remote transmitter and the receiver collar are rechargeable. Use the provided USB charging cable to charge both units simultaneously. A full charge provides approximately 20 days of battery life for the collar and 160 days for the remote.

Image: Illustration showing the USB-C charging ports on both the collar receiver and the remote control, highlighting their long battery life.

Attaching the Collar and Fitting

Attach the receiver to the nylon collar strap. Ensure the collar is properly fitted around your dog's neck. It should be snug enough that two fingers can comfortably fit between the collar and your dog's neck. The collar is adjustable to fit dogs weighing 5-120 lbs with neck girths between 8-27 inches.

Image: A visual guide demonstrating the adjustable nature of the collar strap, suitable for dogs from 5 to 120 lbs with neck sizes from 8 to 27 inches.

Алыстан жана Алгычты жупташтыруу

The remote and receiver are typically pre-paired from the factory. If re-pairing is needed, refer to the detailed instructions in the included User Manual. The remote can control up to 3 collars, allowing for quick switching between dogs.

Иштөө нускамалары

The PaiPaitek Vibrating Dog Collar offers three primary modes: Beep, Vibration, and a combination of Beep + Vibration. Each mode is designed to provide a clear, non-harmful signal to your dog.

Алыстан башкаруу функциялары

Image: A detailed diagram of the remote control and receiver, labeling buttons for mode indication, channel display, vibration level, battery display, sound, and power.

• Кубат баскычы: Пультту күйгүзөт/өчүрөт.
• Mode Indication: Displays the currently selected mode (Beep, Vibration, Beep+Vibration).
• Канал дисплейи: Shows which collar (1, 2, or 3) is currently being controlled.
• Дирилдөө деңгээли: Indicates the intensity level of the vibration (1-100).
• Дирилдөө баскычы: Activates the vibration mode.
• Үн баскычы: Activates the beep mode.
• Sound + Vibration Button: Activates both sound and vibration simultaneously.
• Level +/- Buttons: Adjusts the intensity level for vibration and sound modes from 1 to 100.

Training Modes Explained

Image: Icons representing the three training modes: Beep, Vibrate (1-100 Levels), and Beep+Vibrate, emphasizing that it's a gentle reminder.

• Бип режими: Emits an audible tone from the receiver. Useful for calling your dog or as an initial warning.
• Дирилдөө режими: Delivers a vibration to the collar. The intensity can be adjusted from 1 to 100 levels to suit your dog's sensitivity and the training situation.
• Beep + Vibration Mode: Combines both the audible tone and vibration for a stronger signal.

Натыйжалуу диапазон

The remote control has an impressive range of up to 3300 feet (approximately 1000 meters), allowing for effective training even at long distances. This is particularly useful for off-leash training in open areas.

Image: A person using the remote control from a distance, with a dog visible further away, illustrating the 3300ft range capability of the collar system.

Техникалык тейлөө

Батареяга кам көрүү

To maximize battery life, ensure both the remote and receiver are fully charged before extended use. Recharge when the battery indicator shows low power. Avoid prolonged exposure to extreme temperatures.

Суу өткөрбөйт дизайн

The receiver collar is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. This allows your dog to swim or play in water without needing to remove the collar. However, the remote control is not waterproof and should be kept dry.

Image: A dog swimming in a pool while wearing the PaiPaitek collar, demonstrating its IPX7 waterproof capability.

Тазалоо

The collar strap and receiver can be spot cleaned with a damp cloth. Ensure the charging port cover on the receiver is securely closed before cleaning or exposing to water.

Проблемаларды чечүү

Collar Not Responding

• Батареяны текшерүү: Пульттун жана кабыл алгычтын экөө тең толук заряддалганын текшериңиз.
• Жупташууну текшерүү: Verify that the remote and receiver are properly paired. If not, re-pair them according to the manual.
• Чектен тышкары: Confirm you are within the 3300ft operating range.
• Интерференция: Strong electromagnetic fields or large metal structures can interfere with the signal. Move to an open area.

Vibration/Sound Too Weak or Strong

Adjust the intensity level using the Level +/- buttons on the remote. Start at a low level and gradually increase until your dog responds. Before use, adjust the mode and intensity of the training collar to suit your dog's individual needs and temperament.

Collar Not Staying On

Ensure the collar strap is securely fastened and adjusted to the correct size for your dog's neck. The strap is designed to prevent loosening during activity.

Техникалык шарттар

Кепилдик жана колдоо

For any questions, concerns, or support needs regarding your PaiPaitek Vibrating Dog Collar, please contact PaiPaitek customer service. Refer to the contact information provided in the original product packaging or on the official PaiPaitek webжардам үчүн сайт.